Used small press

2010 GEOPROBE PM 54LT #6256T

Manufactured 2010, approx 1920 hours, Kubota diesel engine, mini drill to access between 36” openings, Geoprobe GH42 hammer, 25,000 lb of pull, hydraulic lateral swing, 2-speed pull cylinder, tethered remote syst...

Bay Shore System LAD400

• Manufacturer: Bay Shore
• Drilling depth: 6,018 m
• Max. torque: 40.0 kNm

40,000 FT-LBS ROTARY TORQUE (MAX) 60 FT HOLE DEPTH (MAX) 78 in hole diameter (max) The LAD400 is a member of Bay Shore Systems’ Limited Access Drill Series, which consists of low-profile excavator-mounted drill r...

Bay Shore System LAD100

• Manufacturer: Bay Shore
• Drilling depth: 6,018 m
• Max. torque: 10.0 kNm

10,000 FT-LBS ROTARY TORQUE (MAX) 60 FT HOLE DEPTH (MAX) 42 in hole diameter (max) The Limited Access Drill (LAD) Series was specifically designed to bring deep-drilling capabilities to severely restricted-access...

Bay Shore System DH20

• Manufacturer: Bay Shore
• Drilling depth: 8,024 m
• Max. torque: 21.5 kNm

21,500 FT-LBS ROTARY TORQUE (MAX) 80 FT HOLE DEPTH (MAX) 48 IN HOLE DIAMETER (MAX) Bay Shore Systems, who has built over 600 LōDrils since releasing the first one back in ’91, specifically designs each installmen...

Bay Shore System LAD140

• Manufacturer: Bay Shore
• Drilling depth: 6,018 m
• Max. torque: 14.2 kNm

14,200 FT-LBS ROTARY TORQUE (MAX) 60 FT HOLE DEPTH (MAX) 48 in hole diameter (max) Bay Shore Systems’ LAD Series is comprised of excavator-mounted rigs, specifically designed to perform deep-drilling operations f...

2017 Klemm KR702-2R

• Manufacturer: Klemm
• Hours: 3,552 h

Mini piling rig with 3552 working hours Ideal for mini piling in confined spaces KH22 rotary head Max torque 24.4kNm Max drill speed 203 rpm 102mm dia hollow shaft Feed force 38kN Retraction force 60kN Separate p...

2005 Klemm KR 709-1

• Manufacturer: Klemm
• Model: KR 709-1
• Hours: 8,269 h

Mini piling rig 8269 working hours Klemm KH43 rotary head Max torque 35.6kNm Max drill speed 124rpm Double hydraulic clamps Mast type L202

2014 MDT 60B

• Manufacturer: MDT

Track mounted mini piling rig with 4400 working hours Set up for mini piling Weight - 7600kg Max torque - 9430Nm Max drill speed - 103rpm Min/max clamp diameter - 48-325mm Feed force - 3000daN Pullback force - 70...

2014 Soilmec SM-9

• Manufacturer: Soilmec
• Hours: 4,498 h

Mini piling/anchoring rig with 4498 working hours HR10L rotary max torque 1000daNm Max drill speed 333rpm Deutz engine (Tier 3) Double hydraulic clamp min/max opening 60-320mm Max clamping force 180kN Max breakin...

2018 Klemm 702-2R

• Manufacturer: Klemm
• Model: 702-2R
• Hours: 1,100 h

Compact Drilling rig 1100 Hours Comes with Klemm PP117G Power Pack CAT C4.4 engine KH-22 Rotary Head Klemm EG Clamps Radio remote control unit Feed Force 38 kN Retraction Force 60 kN Feed Rate 12 m/min Retraction...

1997 Klemm KR 904

• Manufacturer: Klemm

Showing 3188 working hours Klemm O-4054 hydraulic drifter 161 type drill mast (11.6m) Perkins diesel engine (75kW) Double hydraulic clamps Safety cage

2005 Klemm KR709-1

• Manufacturer: Klemm
• Model: KR709-1
• Hours: 4,117 h

Hydraulic Drill Rig 4117 Hours KH43 Rotary head Hollow shaft 150mm Max torque 43.3kN Max Revolutions 176 rpm Cat Diesel 3056 + ATAAC tier 2 Air Cooled engine Rated Output at 2300 rpm 129 Kw/176 hp Drill Mast type...

2020 Klemm KR702-2R

• Manufacturer: Klemm
• Hours: 1,150 h

Vertical Drilling Rig with PP117G Power Pack Powerpack engine Stage 4 Tier 4f Operating max pressure 350bar Oil tank capacity 410l Max force 20kN Drill mast length 2500-3500mm Feed length 1500-2500mm Feed force 3...