Construction » Piling Rigs

Search By Manufacturer

Search By Country

Building Filters

3078

Used Piling Rigs

  • 2007 Comacchio MCT-305

    2007 Comacchio MCT-305

    • Manufacturer: Comacchio
    • Hours: 3,900 h

    Hydraulic Truck Mounted Drill Rig 3900 Hours Mounted on a 2007 Bremach 60 Xtreme right hand drive truck with 26321 km 45 - 220mm Double clamps 7000 dN Clamping force TMA TN90 hydraulic 1000dN winch Gamma 80 TS fo...

    Middlesbrough, United Kingdom
  • 2020 Soiltek S70

    2020 Soiltek S70

    • Manufacturer: Soiltek
    • Hours: 730 h

    Hydraulic Drilling Rig 730 hours Max torque 7742 kgm Drilling speed 10 - 32 rpm Spin-off speed 82 rpm Main winch line pull 7650 kg Main winch rope size 18mm Max line speed 60 meters/minute Auto – feed/auto releas...

    Middlesbrough, United Kingdom
  • 2007 Interoc AN120

    2007 Interoc AN120

    • Manufacturer: Interoc
    • Hours: 10,300 h

    Anchoring rig with 10,300 working hours QSB6.7-C160 engine 350 Litre diesel tank Hydraulic flow rate - 2 x 200 litres/min Working pressure 32MPa Hydraulic tank capacity 415 litres Weight (without drill head& maga...

    Middlesbrough, United Kingdom
  • Auger Mast

    Auger Mast

    • Manufacturer: Auger

    Auger mast to fit onto Archway dart rig Up to 150mm diameter 15m max depth (dependant on ground conditions) Used for subsidence investigations & with hollow stem augers for datum & standpipe installations Archway...

    Middlesbrough, United Kingdom
  • 2017 Liebherr LV20

    2017 Liebherr LV20

    • Manufacturer: Liebherr
    • Hours: 50 h
    • Gross weight: 4,400 kg

    Leader mounted Vibro hammer 50 working hours High frequency vibrator model LV20 with variable moment Transport frame for LV20 Suitable for Liebherr LRB18 machine or similar

    Middlesbrough, United Kingdom
  • 2018 Giken F101

    2018 Giken F101

    • Manufacturer: Giken
    • Hours: 1,950 h

    Silent Piler for U-shaped steel sheets of up to 400mm type II, III and IV. 1950 hours 800kN Press in force 900kN Pull out force 800mm Stroke Press in speed 2.5 – 35.7 m/mim Pull out speed 1.9 – 26.9 m/min Radio C...

    Middlesbrough, United Kingdom
  • 2002 Dawson HPH 2400

    2002 Dawson HPH 2400

    • Manufacturer: Dawson
    • Hours: 1,780 h

    Hours 1780 Comes with a 40ft open top container Equipment : HPH 2400 24 kNm HAMMER SHEETPILES LEGS SPREADER PLATE FOR SINGLE AND DOUBLE AU PROFILE 30 METERS HOSES SET REMOTE CONTROL HPH 2400 93 kW POWERPACK Techn...

    Middlesbrough, United Kingdom
  • 1971 Delmag D-15

    1971 Delmag D-15

    • Manufacturer: Delmag

    Diesel hammer with leader hammer weight is 1.5ton whole setup weight is 3.5ton

    Middlesbrough, United Kingdom
  • 1990 ICE 216

    1990 ICE 216

    • Manufacturer: ICE
    • Model: 216
    • Hours: 2,504 h

    Vibro and Powerpack Package Working hours: 2504 | Powerpack hours: 2504 | Eccentric moment: 13kgm

    Middlesbrough, United Kingdom
  • 2009 Junttan 15CCU

    2009 Junttan 15CCU

    • Manufacturer: Junttan
    • Hours: 1,115 h

    Axial Piston Pump Constant Power Control Working hours: 1115 | Hours: 1115 | Engine: Cummins QSM 11 Tier 3 | Max output: 280kW at 2100rpm | Max pressure: 350 bar | Max oil flow: 2x373 liter/minute at 2000rpm | Le...

    Middlesbrough, United Kingdom
  • 1984 PTC 25H1A

    1984 PTC 25H1A

    • Manufacturer: PTC
    • Hours: 14,000 h

    Crane suspended vibro hammer Max centrifugal force - 626kN Eccentric moment - 23 kgm Comes with 1984 ptc power pack (CAT 3306 D1 Engine) Power pack hours = 14,000 Full working condition

    Middlesbrough, United Kingdom
  • 2008 RTG RG21

    2008 RTG RG21

    • Manufacturer: RTG
    • Hours: 11,730 h
    • Machine weight: 80,000 kg

    MR125V Vibro Hammer 10454 Hours BS65RS base carrier 700mm wide tracks with expanding base from 3.0mtr to 4.5mtr Full ROPSFOPS cab with cat walk Radio & CD Player Air con Colour display on touchscreen monitor with...

    Middlesbrough, United Kingdom
  • 1997 Junttan HHK9A

    1997 Junttan HHK9A

    • Manufacturer: Junttan

    Hydraulic impact hammer Drop height 1200mm Blows per minute 40-100 Max energy 106kNm Ram weight 9000kg Drive cap housing 800mm Control box with 30m cable Comes with 5 drive caps

    Middlesbrough, United Kingdom
  • 2004 Junttan PM20

    2004 Junttan PM20

    • Manufacturer: Junttan
    • Model: PM20
    • Hours: 19,000 h

    19,000 hours Engine overhaul 2016 with 4000 hours on new engine Equipped with Junttan HHK4AS hammer Max. energy 47 kNm Max drop height 1.2 m Blows per minute 40 100 Ram weight 4000 kg Oil flow 304 l/min Operating...

    Middlesbrough, United Kingdom
  • 2014 Klemm 709-2

    2014 Klemm 709-2

    • Manufacturer: Klemm
    • Hours: 4,797 h

    CFA & SFA 4797 working hours Deutz tier 3 engine Feed/retraction force 130kN Mast/stroke length 10,000mm/8000mm Max depth/diameter CFA 8m/600mm Max depth SFA 30m

    Middlesbrough, United Kingdom
  • no-image_en.png

    XCMG XRS1050 Piling Rig

    • Manufacturer: XCMG
    • Model: XRS1050

    Good condition XCMG XRS1050 Piling Rigs manufactured in 2017. Located in China and other countries. Click request price for more information.

    China
4647484950

Overview

Piling rigs are specialized construction machines used for driving piles into the ground to provide foundational support for buildings and other structures. These machines are essential for deep foundation work, ensuring stability and support in various soil conditions. They come in various sizes and configurations, suitable for different types of piling techniques and projects.

FAQ

What should I consider when buying a used piling rig?

Consider the rig's age, overall condition, operational hours, and any history of repairs or maintenance. Assess the compatibility with your specific piling requirements and job site conditions.

How do I ensure the piling rig is shipped safely to my location?

Use a reputable transport service experienced in moving heavy machinery. Ensure the rig is properly dismantled, secured, and protected during transit to prevent damage.

What is the maintenance schedule for a piling rig?

Regular maintenance includes checking hydraulic systems, engine oil, and filters, as well as inspecting cables and other wear components. Follow the manufacturer’s guidelines for detailed maintenance intervals.