Northtech Frame Saw, Model FR-200 Frame Saw
used
- Manufacturer: Northtech
Used Northtech Model FR-200 Frame Saw is arranged with the following features and specifications: Saw capacity of 6" width x 8" vertical capacity. Minimum working 2" high X 12" long. Main drive motor to saw fra...
Portland, OR
Mid-Oregon Cut-Off Saw, Left-Hand Mechanical Cut-Off Saw
used
- Manufacturer: Mid-Oregon
Mid-Oregon Left-Hand Mechanical Cut-Off Saw, Serial No 22875-1734L; new in 5/90. 7-1/2 HP motor 14" diameter blade 2x8 capacity with foot pedal control. Appears to be in good condition, missing side cover. See ph...
Portland, OR
Log Cutoff Saw
used
Used Log Cutoff Saw Assembly. 2" dia. arbor with left hand thread, 12" Dia. collars and nut. Collars have two pin holes at 180º. Currently enough clearance for a 56" dia. saw. No tag on motor. See photos of...
Portland, OR
Invicta Sliding Table Panel Saw, 2-Saw, 10’ Wide Sliding Table Panel Saw
used
Used Invicta 2-Saw, 10’ Wide Sliding Table Panel Saw. Model RP31 Tetra “A”. Built in 2002. Adjusts from 12” to 120”. Saw stations are both adjustable to 45º. Main saw motors are approx. 5HP and have 14” dia....
Portland, OR
New Oliver Cut-Off Saw, Model 5025.002 18" Cut Off Saw
used
- Manufacturer: Oliver
New Oliver Model 5018.002 18” Left Hand Cut off Saw with 7-1/2HP 3 phase motor prewired for 230 volts. 3450 RPM arbor speed. Left Hand Model uses an 18” diameter saw blade with 1” bore (saw blade not included)....
Portland, OR
New Blue Babe Deck Saw
used
New Blue Babe Deck Saw, consisting of: 20 HP electric drive motor mounted on heavy reinforced steel base with built-in belt adjustors, cast steel mandrel assembly, hydraulic cylinder with flow controls, chain sp...
Portland, OR
New Blue Babe Yard Saw
used
- Manufacturer: Blue Babe
One New Blue Babe Yard Saw consisting of; fabricated steel frame with 10-HP electric drive motor, 3 phase 230/460 volts. volts. Frame furnished with three package alignment bumpers for short end trims, 16" semi...
Portland, OR
CASTALY Cut-Off Saw, Model CS-24R Pneumatic Cut-Off Saw
used
- Manufacturer: CASTALY
One (1) CASTALY Model CS-24R Pneumatic Cut-Off Saw, 24” Right Hand with a cutting capacity of 8x11, 6x14, 4x16 and 2x17. Uses 18” to 24” diameter sawblade with 1” arbor. 10 HP motor 2400 RPM wired for 440 volts...
Portland, OR
New Oliver Cut-Off Saw, Model 5015.002 14" Cut Off Saw
used
- Manufacturer: Oliver
New Oliver Model 5015.002 14” Cut Off Saw with 7 �1/2 HP 3 phase dual voltage motor prewired for 230 volts. 4100 RPM arbor speed. Left Hand Model uses a 14” diameter saw blade with 1” bore. Cuts boards up to 1...
Portland, OR
New CROSSCUT SOLUTIONS Cut-Off Saw, Model CCS-18M Cut-Off Saw
used
- Manufacturer: CROSSCUT SOLUTIONS
One New CROSSCUT SOLUTIONS Model CCS-18M Cut-Off Saw, (right or left hand models) mechanically operated, 2" x 12" capacity, 7 1/2 HP motor, TEFC 230/460 volt 3 phase, 60 cycles, includes magnetic starter with 110...
Portland, OR
Northfield Tilting Arbor Variety Saw, No.4 Tilting Arbor Variety Saw
used
Used No. 4 Northfield Tilting Arbor Variety Saw With Regular Rolling Table. Equipped with 5HP Heavy Duty 3,600 RPM TEFC direct drive arbor motor, 220/440 volts, magnetic starter, 17 1/2” X 45 1/2” left side rolli...
Portland, OR
DEWALT Radial Arm Saw, Model GA-525 14” Radial Arm Saw
used
- Manufacturer: DeWalt
One DEWALT Model GA-525 14” Radial Arm Saw with 3 HP 1 phase motor 115/230 volts. Table size 26” deep x 50” side with a 29” rip capacity, 14” diameter saw blade has push button starters. Serial #296807 built in...
Portland, OR
New Blue Babe Deck Saw
used
New Blue Babe Deck Saw, consisting of: 20 HP electric drive motor mounted on heavy reinforced steel base with built-in belt adjustors, cast steel mandrel assembly, hydraulic cylinder with flow controls, chain sp...
Portland, OR
New L-M Yard Saw Model 200 MP-7
used
- Manufacturer: L-M
One New L-M Yard Saw Model 200 MP-7. This portable package saw has a 20HP gas motor and a seven (7) foot double ended saw bar and chain. The saw bar pivots on a cast steel. “TUFFEE” mandrel and uses a spring l...
Portland, OR
New Crosscut Solutions Model CS14M Cut-Off Saw
used
- Manufacturer: Crosscut Solutions
One New Crosscut Solutions Model CS14M Cut-Off Saw (left hand). Mechanically operated, 2" x 8" capacity, 7 1/2 HP motor, TEFC 230/460 volt 3-phase, 60 cycles, magnetic starter with 110 volt control voltage, adju...
Portland, OR
Tip: Enter manufacturer, model or keyword