Used Wire Machinery in Illinois, USA

Delta/Rockwell Miter Gauge & Bar 18" x 3/4" Bar 3/8" Thick (6132)

• Manufacturer: Rockwell

Delta / Rockwell Miter Gauge & Bar 18" x 3/4" Bar 3/8" Thick Bar is 18" x 3/4" x 3/8" Head measures 7 3/8" wide Good used condition All items are sold “AS IS” If you have questions or need information please do...

5/16 RMG Model 56 Wire Drawer w/RA Pointer – #4 – Parts

• Manufacturer: RMG
• Model: 56

No Drive For Parts Capstan diameter: 24″ | Maximum wire diameter (alloy): .312″ | Maximum wire diameter (mild steel): .375″ | Hp: Unknown | Speed range: Unknown | Voltage: Unknown | Weight: 2000 lbs | Dimensions:...

1994 OMCG MODEL 250 WIRE FORMING MACHINE

OMCG MODEL 250 WIRE FORMING MACHINE New 1994 Diameter: 5 mm (.197") Strip Width: 20 mm (.787") Maximum Strip Thickness: 2 mm (.079") Standard Feed Length: 250 mm (10") Motor: 15 HP Dimensions: 102" L x 40" W x 72...

Bachi Model 160

• Manufacturer: Bachi

Model 160 Spindles: 12 on 2" Centers / 8 on 3" Centers | Servo spindle motor power: 50 lb/in @ 4000 RPM ~ 3.2 HP Brushed | Spindle speed: 0 ~ 6,000 with 3 1 ratio | Motor/spindle pulley ratio: 1 1, 2 1, 3 1 with ...

LaCesa Model 101 Stick Winder

• Manufacturer: LaCesa

LaCesa Model 101 Stick Winder with MCS6 Control Servo spindle motor power: 97 lb/in @ 2000 RPM ~ 3 HP Brushed | Spindle speed: 0 ~ 2,000 with 1 1 ratio | Transmission ratio: 4 1, 3 1, 2 1, 1 1 | Spindle positioni...

Bachi Model 230

• Manufacturer: Bachi

Model 230 Spindle: 4 on 3" Centers | Servo spindle motor power: 50 lb/in @ 4000 RPM ~ 3.2 HP Brushed | Spindle speed: 0 ~ 12,000 with 1 1 ratio | Motor/spindle pulley ratio: 1 1, 2 1, 3 1 with optional pulleys | ...

ACCRA D30A WIRE PAYOFF REEL

ACCRA D30A WIRE PAYOFF REEL Motor Drive by Single Phase, 50-60 HZ, 115/230 Volt AC Motor & Coontrols Capacity 3,000 Lbs. Speed 0-32 RPM Table Size 45" O.D. Wire Size .050" -.375" Approximate Dimensions 90" x 45"