Used Test Generators in Florida, USA

GW Instek SFG-2004

• Manufacturer: GW Instek
• Model: SFG-2004

DDS Technology and FPGA Chip Design Frequency Range:0.1Hz~4MHz High Frequency Accuracy : ± 20ppm High Frequency Stability : ± 20ppm Frequency Resolution :100mHz Low Distortion Sine Wave:-55dBc,0.1Hz~200kHz Front ...

UFX7103A

Type N, BNC, or SMA connectors available 127 dB attenuation in 1 dB, or optional 0.1 dB steps Optional signal path attenuators SP6T switch allows four internal/external filter paths Band pass, low pass, high pass...

Keysight / Agilent / HP 8642B

• Manufacturer: Agilent - Keysight
• Model: 8642B

< -134 dBc/Hz SSB phase noise at 20 kHz offsets at 1 GHz. -100 dBc nonharmonic spurious allows spurious rejection tests to be fully automated with confidence ±1 dB absolute output level accuracy down to -127 dBm ...

Rohde & Schwarz SMIQ02E

• Manufacturer: Rohde & Schwarz
• Model: SMIQ02E

Minimum Frequency 300 kHz Maximum Frequency 2.2 GHz Frequency Resolution 0.1 Hz Frequency Switching Time 20 ms Time base stability 0.000001 /yr External Frequency Reference 10 MHz Minimum Output Power -140 dBm Ma...

PNG7107A

Type N, BNC, or SMA connectors available 127 dB attenuation in 1 dB, or optional 0.1 dB steps Summing input for CNR, or Eb/No measurements 0 dB signal path insertion loss +/- 0.25 dB per 40 MHz noise band smoothi...

Wavetek 98

• Manufacturer: Wavetek
• Model: 98

Low-Distortion Synthesized Oscillator Direct Digital Synthesis Sine Wave Generation n < 0.02% THD typical 1 uHz to 1.1 MHz frequency range 8 digits of frequency resolution 7 Frequency Sweep Modes 15 mVp-p to 30 V...

PNG7112A

Type N, BNC, or SMA connectors available 127 dB attenuation in 1 dB, or optional 0.1 dB steps Summing input for CNR, or Eb/No measurements 0 dB signal path insertion loss +/- 0.25 dB per 40 MHz noise band smoothi...

PNG7108A

Type N, BNC, or SMA connectors available 127 dB attenuation in 1 dB, or optional 0.1 dB steps Summing input for CNR, or Eb/No measurements 0 dB signal path insertion loss +/- 0.25 dB per 40 MHz noise band smoothi...

PNG7105A

Type N, BNC, or SMA connectors available 127 dB attenuation in 1 dB, or optional 0.1 dB steps Summing input for CNR, or Eb/No measurements 0 dB signal path insertion loss +/- 0.25 dB per 40 MHz noise band smoothi...

Tektronix AWG5014

• Manufacturer: Tektronix
• Model: AWG5014

A single test instrument to generate the signals you need - analog, digital or mixed signals Up to 4 analog outputs and 28 digital outputs, plus 4 digital markers for simultaneous analog and digital signal genera...

Tektronix AWG5002

• Manufacturer: Tektronix
• Model: AWG5002

A single test instrument to generate the signals you need - analog, digital or mixed signals High 14-bit vertical resolution delivers ample dynamic range and top reliability due to more accurate characterization ...

GW Instek SFG-2107

• Manufacturer: GW Instek
• Model: SFG-2107

DDS Technology and FPGA Chip Design Frequency Range:0.1Hz 7 MHz High Frequency Accuracy : ± 20ppm High Frequency Stability : ± 20ppm Frequency Resolution :100mHz Low Distortion Sine Wave:-55dBc,0.1Hz~200kHz Front...

Keysight / Agilent / HP N5181A-503

• Manufacturer: Agilent - Keysight
• Model: N5181A-503

Covers the cellular and lower ISM frequency bands Frequency resolution: 0.01 Hz Phase noise performance: -116 dBc/Hz at 1 GHz carrier, 20 kHz offset Output power: +14 dBm (measured) at 3 GHz with electronic atten...

Protek B8040FD

• Manufacturer: Protec

Built with highly stable and reliable Direct Digital Synthesis technology Sine, Square, Pulse, Triangle, Ramp, Sine [x]/x, Exponential up, Exponential down and Noise waveforms All models have a dual output with a...

Protek B8020FD

• Manufacturer: Protek

Built with highly stable and reliable Direct Digital Synthesis technology Sine, Square, Pulse, Triangle, Ramp, Sine [x]/x, Exponential up, Exponential down and Noise waveforms All models have a dual output with a...