Used Saws in Minnesota, USA

V-36 DoAll V-36 36"

• Manufacturer: DoAll
• Model: V-36

Model V-36, S# 20292, 36" x 7.5" Work height, 1/4" Blade (1/2" max), Front table 30.5" x 30.5", Rear table 20"W x 17"L, Adjustable miter - cross angle stop, Quick clamp back stop 27"L x 1.25"W x 2.5"H, Adjustable...

T&B Tube Cut Off Machine

Capacity 2" round, Set up for 5/8" x 3/8 " rectangle tube, Has 3 roll powered in-feed, Hydraulic powered by 15hp 208-220/440/3ph, Auto lube system, Vickers vane pump 4520V60A, Die space measures 4 5/8" wide, Miss...

TF-2525 DoAll TF-2525 25" Hydraulic Tilt Frame

• Manufacturer: DoAll
• Model: TF-2525

Model TF-2525, S# 356-84241, 8,743 Hrs., 25" Capacity, More info coming soon

No. 8/M3/M4/E1 Marvel 24" x 18" No. 8

• Manufacturer: Marvel
• Model: 8M

Series 8, Model No. 8/M3/M4/E1, S# 86740, 32.75" x 25.5" Table, High column, Capacity: 24" x 18", 45° Capacity: 20.75" x 18", Blade capacity 3/4" x 15' 8" x .032 (no blade on machine), Manually adjusted built in ...

NS18 Grob NS18 18"

• Manufacturer: Grob
• Model: NS18

Model NS18, S# 8649, 24" x 24" Tilting table, 18" Throat, 1/4" x 11' 10"L Blade (1/2" Max), 8.75" Max height under guides, 10 Speeds from 50 to 2,030 fpm, Blade welder/grinder, 3/4hp 230/460v 3ph, Overall Dim. 42...

Metal Master DoAll 36" Metal Master

• Manufacturer: DoAll
• Model: METAL MASTER

Model Metal Master, S# 363990, 36" Throat x 7.5" working height, Front table 30" x 30", Rear table 20"W x 17"L, 1/4" Blade (1/2" max), Variable speed from 50 to 1,600, Adjustable work light, Quick open access cov...

66-H Cochrane Bly 36"

Model 66-H, S# T-66-H12, 15" x 8" Capacity, 4 Speeds 40/63/80/96 FPM Hydraulic infeed, 15hp 220/440v 3ph

Hyd-Mech H-230A Horizontal Bandsaw, New 2019

• Manufacturer: Hyd-Mech
• Model: H230A

Hyd-Mech H-230A Horizontal Bandsaw, New 2019 Serial Number 5-12-19-375-SB-T1 Complete with: Automatic PLC Touch Screen Control, Split Front Vise, Blade Brush, Roller Table, Chip Auger, 5’ Roll Conveyor, 2 New Bla...

DoAll C-912A Horizontal Metal Cutting Bandsaw

• Manufacturer: DoAll
• Model: C-912A

DoAll C-912A 9" x 12" Horizontal Metal Cutting Bandsaw, 60-360 FPM Blade Speed, 148" Blade Length, 3HP, 440V, 6.8A, 60 Hz, 3PH, S/N 368-80419, with 16" x 10' Outfeed Roller Conveyor

1977 Grob Model 4V-18 Vertical Bandsaw W/ Blade Welder

• Manufacturer: Grob

Grob Model 4V-18 Vertical Bandsaw Grob Model 4V-18 Serial # 2793 New in 1977 Wired 240 Volt 3 Phase Equipped With: 1″ Blade Welder Air Chip Blow Four Speed Gear Box. Rigid Heavy Gauge Steel Frame, Start-Stop Ove...

VOORTMAN VB1250

• Manufacturer: Voortman

VOORTMAN (NEW) MODEL VB1250 BEAM SAWING SAW CAPACITY 24" X 50" 0 DEGREES 24" X 47-1/4" 15 DEGREES 24" X 39-13/32" 30 DEGREES 24" X 33-1/2" 45 DEGREES 24" X 20" 60 DEGREES SERVO MOTOR FEED 15 HP DRIVE 130 - 400 FT...

CBW6 Hammond Chip Breaker Grinder

• Manufacturer: Hammond

Model CBW6, S# 1008, 5" Wheel, Two machines in one tool grinder and abrasive saw & grinder, 14" x 6" Tilting table, 7" x 9" Table mount t slotted table with quick action slide, With controls, 3,500 rpm, 1hp 220/4...