Used Saws in Illinois, USA

Biro Manufacturing 3334

• Manufacturer: Biro
• Model: 3334

Refurbished BIRO 3334 Band Saw. Stainless steel base with aluminum head and removable door. Ratchet arm blade tensioner. 2 HP TEFC motor, nonslip V-belt drive, 124″ X 5/8″ X .02 Blade, 3,200’/min., 16″ diameter b...

Biro Manufacturing 3334

• Manufacturer: Biro
• Model: 3334

BIRO 3334 Band Saw. Stainless steel base with aluminum head and removable door. Ratchet arm blade tensioner. 2 HP TEFC motor, non-slip V-belt drive, 124″ X 5/8″ X .02 Blade, 3,200’/min., 16″ diameter blade wheels...

Biro Manufacturing 3334

• Manufacturer: Biro
• Model: 3334

Reconditioned Biro 3334 Band Saw. Stainless steel base with aluminum head and removable door. Ratchet arm blade tensioner. 2 HP TEFC motor, non-slip V-belt drive, 124″ X 5/8″ X .02 Blade, 3,200’/min., 16″ diamete...

2025 DOALL 400 S

• Manufacturer: DoAll
• Model: 400S

Doall 400-S Swivel Bandsaw Doall, Mitering, cut-off saw, Swivel head to 45 degrees, Coolant system, solid carbide faced spring loaded blade guides, gear driven blade brush, fine adjust head control, discharge tra...

1993 Amada HFA 400W Automatic Horizontal , Programmable bandsaw, NC control, 16" Capacity, like Marvel, Spartan, Hyd-mech, HEM, Kasto, Behringer

• Manufacturer: Amada
• Model: HFA-400W

16" Capacity NC bandsaw, Amada model HFA 400 W, heavy duty, production, fully automatic, Programmable up to 99 jobs, Piece counter with auto stop, multiple feed length, 1.5" Blade, 7.5 H.P drive motor, Chip conve...

2005 Amada HA-250W Horizontal Bandsaw

• Manufacturer: Amada
• Model: HA-250W

AMADA HA250W Automatic Horizontal Band Saw 2005 Manual / Automatic mode Variable speed design Chip auger Built in coolant system / 10 gallon reservoir Machine manuals, parts, electrical, operation 1/12 H.P. auger...

2000 Daito RCA150

• Manufacturer: Daito

6” Daito Model RCA 150 High Speed Production Circular Cold Saw Carbide Tipped Blade for High Speed, High Precision Cutting. Daito CNC Control with Touch Pad Screen Programming, Diagnostics, and Trouble Shooting. ...

1990 Hem H160XLM

• Manufacturer: HEM
• Model: H160

Infeed/Outfeed Tables Included Machine type: Horizontal Saws | Capacity: 27” x 37“ | Machine location: South Carolina | Stock #: 239558 | Max cutting height (vertical): 27″ | Max cutting width (horizontal): 37″ |...

2001 HEM Twister Auto 14" x 20" Mitering, Horizontal, Automatic Bandsaw like Hyd-Mech, Marvel, Doall

• Manufacturer: DoAll

HEM Saw Fully automatic, Mitering Bandsaw with Parts counter and multiple stroke, Coolant system and All Available manuals Full Auto operation, Mitering, parts Counter, Multiple feed, Coolant system and all avai...

2023 DOALL S-320NC

• Manufacturer: DoAll
• Model: S-320NC

Doall S-320CNC Swivel Bandsaw 2022 Doall S-320NC Swivel Bandsaw, Heavy Duty bandsaw, Production Bandsaw. Mitsubishi Saw Control, Overfeed Protection, Discharge Chute, Digital Read Out of Cutting Angle, Pulley-Dri...

2025 Dual Column Programmable Bandsaw

Fully automatic, Dual Column Programmable bandsaw, 12.6 X 15'"Capacity, New Full Warranty, Blade “clip” device eases blade changing when necessary by holding the blade on the band wheel during installation, makin...

2025 Doall Dual column production Bandsaw, programmable

• Manufacturer: DoAll
• Model: DC-280NC

Doall Dual Column 280 NC Automatic Horizontal Bandsaw Doall DC-280NC Automatic Horizontal Bandsaw, Heavy Duty bandsaw, Production Bandsaw, Automatic Bandsaw, Dual Column. Programmable logic controller, Feed rate/...

2002 Doall 916SA

• Manufacturer: DoAll
• Model: C-916SA

Good working saw, can be seen under power. Pedestal and extra new saw blades

Hobart 6614

• Manufacturer: Hobart
• Model: 6614

HOBART 6614 Band Saw. All stainless steel construction, RPM: 3450, AMP: 9.3/8.2, Motor: 3 HP, 220V/3PH/60HZ.

Hobart 6614

• Manufacturer: Hobart
• Model: 6614

HOBART 6614 Band Saw. All stainless steel construction, RPM: 3450, AMP: 9.3/8.2, Motor: 3 HP, 220V/3PH/60HZ.