Used logging in Czech Republic

Log hopper for feeding logs to a band saw or angle saw and more.

Log hopper with chain feed of the log in front. Electric feed gearbox + motor. Hydraulic tilting and lifting of the front part of the table, with chain feed of the log to the saw hydraulically. The basic dimensio...

Log band saw RS-18G

Hobby RS-18GT log band saw

Universal log feeder PK-3

• Manufacturer: Universal Instruments

The barfeeder can be adapted to each model of the machine for which logs are required to be divided into logs. The feeder can be used for such devices as: saw-splitting machines, circular saws or prism saws and t...

Logs hopper with feeding to PP-1 band saw

The log magazine with feeder can be adapted to any model of band saw that has hydraulics installed. In case the saw is not equipped with hydraulics, it is possible to deliver it including a hydraulic distributor ...

Saw for sawing logs and production of sawn timber Slidet

Parameters: Steel frame 18 m stainless steel sliding rails Blade shaft 65 mm. and hydraulic blade guidance toothed hydraulic slide cylinder steel profile table 9 m long mechanical fencing device setup stationary ...

Log band saw A-1200 Z

Accessories at extra cost: • Pre-cut. • Cutting length extension. • El. Motor 11 kW / 15 kW / 18.5 kW • Electric feed roller. • Additional manual pressure. • Operator's seat • Operator's platform • Stationary con...

Log band saw A-1200, BIG 150.

Optional accessories: (depending on size) In addition, the A 1200 BIG 150 can be equipped with: increased power to 18.5kW or 22kW. Electrically controlled bark pre-cut. Microprocessor cutting thickness regulator ...

Log band saw G-700/470

Optional equipment - for an additional fee: - measuring the thickness of the ISP-010 section - electricity, water shut-off - stationary control panel - precut - smooth feed - full saw hydraulics – log pressure, l...

ZDW-300

BT-300 router technical data Diameter of machined round (160) 180 to 300 mm Feed speed from 1 to 2m/min Milling head 8 knives. Total machine input 25 kW (34 kW) Length 12 m Width 1.6 m Height 1.6 m Main engine 22...

1997 Behringer

• Manufacturer: Behringer

Pracovní rozmezí (90°): log �� 195 mm, prism 180 x 180 mm | Working range (45°): kulatina Ø 110 mm, hranol 110 x 110 mm | Plochý materiál: 220 x160 mm | Motor (výkon): 0,75 KW | Cutting sheet: 400 x 32 x 1.6