Used logging in Oregon, USA

Northfield #4 Table Saw

• used

1390 lbs. 44" L x 36" W x 44" H Size: 4 | Serial: MS92250LV | Hp: 7.5 | Rpm: 3450 | Phase: 3 | Cycles: 60 | Frame: J58 | Enclosure: TEFC | Winding: R & M | Temp rise: 55˚C | Volts: 220 / 440 | Full load amps: 21 ...

Flare Circular Sawguide Resurfacer

• used

• Manufacturer: Flare Machinery Ltd.

From the included manual: "The Flare Machinery Ltd. Sawguide Resurfacer is designed and manufactured for convenience and accuracy when dressing circular sawguides. It is intended to cut mainly Babbitt surfaces, b...

MDI Metal Detector / Scanner (for lumber)

• used

2 @ 46” x 18 ½” x 6” 1 @ 36” x 19 ¾” x 6” 1 @ 38” x 12 ¾” x 2” 1 @ 36” x 11 ½” x 2” 1 @ 30” x 12” x 2” 1 @ 26” x 12” x 2” 1 @ 24” x 12” x 6”

2021 Grizzly GO531B 21" Vertical Resaw Bandsaw with Brake & Extras

• used

• Manufacturer: Grizzly

Powermatic TS80/SAC Table Shaper

• used

• Manufacturer: Powermatic

Interchangeable Spindles (see photos) Serial No 807908 1050 Pounds 32" Length 45" Width 64" Height

Powermatic 72 Table Saw

• used

• Manufacturer: Powermatic

970 Pounds 57" Length 84" Width 49" Height Hp: 5 | Machine size: 12-14 Inch

Oliver 144 Jointer

• used

Model 144-BD Serial # 74981 w/ Woods 1 HP / 3 phase motor (tag in photos) 536 Lbs 42” Length 66” Width 47” Height

Max Oscillating Spindle Sander

• used

220V 3 Phase 280 lbs. 24" L x 24" W x 48" H

Cannon 2020 HZUS9 Controller for Holzma Panel Saw

• used

• Manufacturer: Holzma

Model # HZUS9 Serial # 1504076 Supply UN1U Freq 60 Removed in good working condition

Gang Edger Sawglide System

• used

Measures 75 1/2" L x 48" W x 74" H Weighs 2160 lbs Was used with 76 Uniguide II 150 lubricant See images for details

Delta DJ-20 Model #37-350 Jointer

• used

• Manufacturer: Delta
• Model: DJ-20

Catalog number: 37-350 | Made in: Taiwan | Motor hp: 1.5 HP (1 1/2 HP) | Motor rpm: 3450 RPM | Voltage: 115/230V, 60 Hz | Amps: 16.8/8.4 A | Motor type: TEFC (Totally Enclosed Fan Cooled) | Service factor: 1.0 |...

New / Unused Transfer Decks

• new

Never Used See photos for measurements

CEMCO #WBS-197 48" 3-Head Sander

• used

• Manufacturer: Cemco

Very dependable machine 1st Head: Hard rubber: sand lumber surface, particle board, MBF 2nd Head: 65 lb Soft: For veneers, hardwood, 120 grit, #3 hardware, takes 4/5000ths off Spare 2nd Head Included Has one 75 H...

36" Vertical Band Saw

• used

28" x 32" Table No identification tags on unit Size: 36"

Knurled Feed Rollers

• used

• Manufacturer: Rex / Rexnord

Type E High Speed Model # ZEP2207 Shaft: 2 ⅜” | Diameter: 10” | Face: 18 ¼”