Used Lathes in Ohio, USA

Mazak Lathe
- used
- Manufacturer: Mazak
Cleveland, OH
8"/200mm Independent 4-Jaw Lathe Chuck w/Chuck Key
- new
8"/200mm Independent 4-Jaw Lathe Chuck w/Chuck Key
Toledo, OH
Mactech 1224 End Prep Lathe Pipe Beveler High Speed Beveling Machine
- used
Mactech End Prep Machine 1224 Hey fellas you can purchase this for the price of a few rentals and then you own it forever. These are expensive and of course this model is no longer made but it is still used and ...
$5,399 USD
Get financing
Est. $106/mo
Graytown, OH
Climax Model PL 1150 Or PL 3000 PORTABLE lathe Boring, Turning, JOURNAL SQUIRREL
- used
- Manufacturer: Climax
Climax PL 1150 or PL3000 the new number. This is an expensive little machine. This one comes complete with some extras... looks like it was not abused. A very nice machine with extras this is ready to put to work...
$33,000 USD
Get financing
Est. $621/mo
Graytown, OH
Clausing Colchester gap bed lathe, 17" x 80", 3.15" spindle hole, tailstock incl
- used
- Manufacturer: Clausing
- Model: 17-80
Clausing Colchester gap bed lathe, 17" x 80", 3.15" spindle hole, tailstock included. 11" swing over cross-slide, 24" swing in gap, 16 speeds, 20-1,600 rpm. 10 HP drive motor. Inch/metric threading. Condition ...
$9,499 USD
Get financing
Est. $187/mo
Hinckley, OH
Trusted Seller
Stand & Contents
- used
Stand & Contents Load out period: September 26 - October 9, 2025 By Appointment ONLY! | Estimated dimensions: 25" x 16" x 27"H | Estimated weight: 150 lbs | Load fee: 0.00
Tiffin, OH
Trusted Seller
2001 SL30TB HAAS "BIG-BORE" CNC TURNING CENTER w/4” SPINDLE BORE - COLLET CHUCK - PROGRAMMABLE TAILSTOCK - TOOL PRESETTER - 40 HP MOTOR
- used
- Manufacturer: Haas
- Model: SL-30TB
- Spindle Bore: 4"
- Spindle Nose: A2-8
#SL30TB HAAS "BIG-BORE" CNC TURNING CENTER NEW NOVEMBER 2001, SERIAL NO 64571, MODEL SL30TB Imperial Metric EQUIPPED WITH: Haas CNC Control 4" Big Bore Drive System Collet Chuck - 12-Position Turret Programmable ...
$17,500 USD
Get financing
Est. $344/mo
Cincinnati, OH
Trusted Seller
2007 TL-25B HAAS "BIG-BORE" DUAL-SPINDLE CNC TURNING CENTER w/SUB-SPINDLE - LIVE TOOLING - 4” SPINDLE BORE -
- used
- Manufacturer: Haas
- Model: TL-25B
TL-25B HAAS "BIG-BORE" DUAL-SPINDLE CNC TURNING CENTER Imperial Metric w/SUB-SPINDLE & LIVE TOOLING New 2007, Serial NO. 3079346, Model TL-25B EQUIPPED WITH: Haas CNC Control Sub-Spindle - Live Tooling 4" Big Bor...
$32,500 USD
Get financing
Est. $612/mo
Cincinnati, OH
Trusted Seller
2005 Haas SL-30T
- used
- Manufacturer: Haas
- Model: SL-30T
- Spindle Bore: A2-6" / 3.5"
- Distance between Centers: 39"
12" 3 Jaw Hydraulic Chuck Chip Conveyor Programmable Tailstock Tool Presetter Block Style Turret Rigid Tapping 2 Speed Gearbox High Intensity Lighting Chuck & Tailstock Foot Pedals USB Port Interface RS...
Ohio, USA
Trusted Seller
1999 Haas SL-30T
- used
- Manufacturer: Haas
- Model: SL-30T
- Spindle Bore: A2-6" / 3.00"
- Distance between Centers: 39"
10" 3 Jaw Hydraulic Chuck Auger Style Chip Conveyor Programmable Tailstock Rigid Tapping RS 232 Port Interface 208/230V Electrics All Available Tool Blocks Haas Manual **New in August of 1999** **Power O...
Ohio, USA
Trusted Seller
2006 Haas GT-20
- used
- Manufacturer: Haas
- Model: GT-20
- Spindle Bore: A2-6" / 3"
- Spindle Nose: A2-6" / 3"
5C Collet Chuck 8" 3 Jaw Hydraulic Chuck 8 Position Bolt On Turret Chuck Foot Pedal Coolant Pan/Pump USB Port Interface Work Light Prepped for a Barfeed No Tailstock All Available Tooling All Available Manuals
$24,950 USD
Get financing
Est. $470/mo
Ohio, USA
Trusted Seller
Auction
(LOT) SHELF UNIT WITH 5-C COLLETS AND CHUCK JAWS
- used
(LOT) SHELF UNIT WITH 5-C COLLETS AND CHUCK JAWS
Fairfield, OH
Visit Auction Website
Trusted Seller
SOUTH BEND 5C COLLET SET
- new
- Manufacturer: South Bend
New 5c collet set made by RSB 16 pcs 1/8 to 15/16 was sold for use in South Bend Lathe but are standard 5C.
Cleveland, OH
Trusted Seller
1982 CRAWFORD SWIFT C-4308 #2000316
- used
- Manufacturer: CRAWFORD SWIFT
SPECIFICATIONS: 34" X 96" CRAWFORD SWIFT CNC ROLL TURNING LATHE 34" Roll Turning Dia. 96" Max. Roll Length 5 to 250 RPM Allen Bradley 9 Series CNC Control, Pendant Mounted. 50 HP Toshiba Spindle Drive With Electr...
Toledo, OH
Trusted Seller
ALORIS DA SERIES
- used
- Manufacturer: ALORIS
DA 1 HOLDER TURNING AND FACING HOLDER
Cleveland, OH
Haas TL-25B Lathe
- used
- Manufacturer: Haas
- Model: TL-25B
Good condition Haas TL-25B Lathes available between 1987 and 1996 years. Located in USA and other countries. Click request price for more information.
USA