Used Drilling Rigs in New York, USA

1973 SANDERSON CYCLONE 300 DRILL RIG #3476T

• Manufacturer: Sanderson

Manufactured 1973, Mounted on 1999 International 4700 truck with diesel engine, PTO, 110,000 miles, centrifugal pump was removed Price: $65,000

SPEEDSTAR 55 CABLE TOOL DRILL RIG #8944Tb

3 lines, 36’ mast, International 123 gas engine, mounted on 1978 International truck with Cummins diesel engine, 2 rear mechanical leveling jacks Price: $16,500 - Michigan SPEEDSTAR 55

SPEEDSTAR 71 CABLE TOOL DRILL RIG #3925T

Continental 122 engine on deck (won’t start), mounted on 1970 International truck with gas engine, new batteries, new belts, 2 rear jacks, 1 stem, 8” bit, 2 jars, 3 bailers, fishing tools Price: $35,000 – So...

1996 GUS PECH GP-900R TOPHEAD DRIVE DRILL RIG #9497T

Manufactured 1996, 24,537 lbs pullback, 9000 ft/lb torque, mounted on 1996 Western Star with Cat 3406E engine, hydraulically driven Gardner Denver 5 x 6 mud pump, Volvo Penta diesel deck engine runs rig, has l...

2005 LLAMADA P90-TT CFA DRILL RIG #924T

• Manufacturer: Llamada

Manufactured 2005, 21m drill depth, 350mm-850mm diameter, 9,700 kg/m / 70,000# rotary torque with 3 speed tophead, telescopic 7 ton counterweight, 52 ton overall weight of rig (without augers), Deutz diesel 25...

2012 SOILMEC SR30 CFA AND ROTARY DRILL RIG #4873T

• Manufacturer: Soilmec
• Model: SR-30

Manufactured 2012, approx. 7500 hours, 130 kNm max torque, 750mm CFA max diameter, 23m CFA max depth. 1500mm max rotary drilling diameter, 48m max rotary drilling depth, Cummins QSB 6.7 diesel engine, Soilmec ...

2008 SERVICE KING 675 DRILL RIG PACKAGE WITH CAT IV CERTIFICATION #6830T

• Manufacturer: Service King

Manufactured 2008, 104’ x 315,000# derrick, single drum with 8 lines 1-1/8” wire, dual 6’ hydro breakout, 150 ton swivel, 4-1/2” x 40’ kelly, 12’ substructure with 18” rotary table, 27’ x 10’ x 8’, 30,000# Rig...

FRANKS 210 DRILLING RIG #9327T

• Manufacturer: Franks

Built 1961, mounted on 1982 International truck with 466 Industrial, PTO, Gardner Denver 6 x 9 mud pump, Mission centrifugal pump, air compressor, 23’ kelly, large rotary table, 2 winches, 3800’ depth, 300’ of...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #5067T

• Manufacturer: Bucyrus-Erie
• Model: 22W

Mounted on 2008 gooseneck trailer, 2011 66HP Tier 4i engine with approx. 1310 hours, California Carb Compliant, 40’ mast height, 2 breakout wrenches, no other tooling, currently working Price: $57,000 - Calif...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #8981T

• Manufacturer: Bucyrus-Erie
• Model: 22W

Propane deck engine, cathead, 3 line machine, 800’ of mainline, mounted on 1972 Ford truck with gas engine, 1 front and 2 rear hydraulic leveling jacks Tooling: drill stems, drill bits ranging from 6” to 8”...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #5504T

• Manufacturer: Bucyrus-Erie
• Model: 22W

3 line machine, approx 600’ of cable on it, Ford 6 cyl gas deck engine, mounted on 1979 International tandem axle truck with 345 gas engine, 3 strings of tools (drilling string, clean out string and 4” clean o...

2023 Mi8h DRILLING RIG #7200T

Manufactured 2023 – Never Used – immediately available Price on Request

BAYSHORE TR110-60 TRUCK MOUNTED DRILL RIG #4776T

• Manufacturer: Bay Shore
• Model: TR60

60’ drill depth (4 element round locking), 70’ depth (4 element square friction), 198” crowd stroke, up to 13’ hole diameter, 44,000 lb crowd force, BSS 30,000 lb bar drum pull, 12,000 lb bare drum pull servic...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #7315T

• Manufacturer: Bucyrus-Erie
• Model: 22W

Mounted on 1979 Ford Louisville truck with gas engine, 6 cylinder Hercules gas deck engine, 2 rear manual jacks, fully tooled (3” and larger), sitting since 2019, does not run Price: $16,500 - Illinois BUCY...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #400T

• Manufacturer: Bucyrus-Erie
• Model: 22W

Built 1946, mounted on 1977 Ford F600, 16,700 actual miles, lots of repairs and upgrades, new fuel pump, new radiator, inside looks new, outside paint faded, good working condition, tools Price: $62,000 – N...

Kent DK525 Drilling Rig

• Manufacturer: Kent
• Model: DK525

Good condition Kent DK525 Drilling Rigs manufactured in 2012. Located in USA and other countries. Click request price for more information.