Used Agitators, Blenders, Mixers in West Virginia, USA

2HP TQS Verical Cone Mixer Weigh Feeder - Model 38A-1

Welded and bolted mild steel construction Capacity: 880LB per hour 20 cu/ft hopper volume, 50" top diameter cone with approximately 24° slope Flat top has a 3.75"Ø flanged vent port, 7"Ø product inlet 3-point mou...

4" Dia. X 4' Long Stainless Steel Volumetric Mixer Screw Feeder

Flared style trough with top flange and foot mounting Auger diameter is approx 4-1/2", having cut flights for chopping product during convey 2"Ø bottom thru port two-way discharge with ball valve 3/4HP TEFC motor...

8" dia. x 24' Long Screw Auger Conveyor Paddle mixer

ITEM #: 16058 Used 8" dia. x 24' Long Screw Auger Conveyor Paddle mixer 8" dia. x 24' Long Removable Flight Screw Auger ConveyorFull CoverStandard Pitch4" Center Outlet4" x 4" Outlet on non-driven end10" x 7" Out...

7.5HP Stainless Steel Industrial Paddle Mixer - 38 CU/FT

ITEM #: 20318 Used 7.5HP Stainless Steel Industrial Paddle Mixer - 38 CU/FT All stainless steel construction.Mixer housing is 32" diameter X 74"L with exterior side stiffener bars.Nominal wall thickness of 0.112"...

Stainless Steel Continuous Ribbon Mixer 10" Diameter x 8 ft Length

ITEM #: 19967 Used Stainless Steel Continuous Ribbon Mixer 10" Diameter x 8 ft Length All stainless steel construction.Inlet: 11" X 31" elliptical sleeveDrive End Discharge: 10"Ø sleeveIdle End Discharge: 11" squ...

13" dia X 6' L Stainless Jacketed Continuous Plow Paddle Mixer Walker Equip

• Manufacturer: Walker

ITEM #: 19367 Used 13" dia X 6' L Stainless Jacketed Continuous Plow Paddle Mixer Walker Equip Constructed from 304 stainless steelFlanged U-trough design with approximtely 15 sq/ft area of dimple-plated jacketJa...

24" Dia. X 8' Continuous Process Paddle Mixer Jacketed Pug Mill - NO DRIVE

ITEM #: 21364 Used 24" Dia. X 8' Continuous Process Paddle Mixer Jacketed Pug Mill - NO DRIVE All mild steel construction.Product Inlet: 17.5" X 15" flanged with removable panelProduct Discharge: 24" X 13.5" flan...

GEA Continuous Stainless Steel HeavyDuty Industrial Paddle Mixer Pug Mill Unused

• Manufacturer: GEA

ITEM #: 21161 GEA Continuous Stainless Steel HeavyDuty Industrial Paddle Mixer Pug Mill Unused The Heavy-duty U-trough is 36"W X 20'L, has a depth of 38" with foot base mounts.Full length bolted trough covers hav...

1.5 HP PHILADELPHIA MIXER CORP SIZE PMV-01 PTM; UNUSED!

• Manufacturer: Philadelphia

ITEM #: 06064 1.5 HP PHILADELPHIA MIXER CORP SIZE PMV-01 PTM; UNUSED! S/N 92ZAF1169. ORDER # 9280. P.O. # LCWC-18-W. EN# 0205-7100-517. OUTPUT RPM = 100. 13-1/2" DIA. STAINLESS STEEL MOUNTING FLANGE. STAINL...

24" Dia. X 10'L Mild Steel Continuous Process Paddle Mixer Pug Mill

ITEM #: 21365 Used 24" Dia. X 10'L Mild Steel Continuous Process Paddle Mixer Pug Mill All mild steel construction.Product Inlet: 24" X 15" flanged with removable panelProduct Discharge: 24" X 14" flanged with re...

500 Cubic Foot Young Industries Stainless Steel Gravity Blending Silo Bin

6' diameter X 17'-6" straight side (26' overall height). 60° bottom cone. The drop tubes are all coming into a 16" square Bunting bar grate magnet. Product then transitions (w/4" flanged port) into a small manua...

SANCO Precision resin batching equipment dual batch pumps and mix pots

• Manufacturer: Sanco

Two stainless steel 23" DIA X 19" deep mixing pots. Metering pump system with strainer and electric heater for resin temperature control Mix pots are mounted on electric rotation drive units with stationary plo...

Acrison Bin Discharger Screw Feeder BDF

• Manufacturer: Acrison

3" outlet screw, (2) agitators (2) Leeson 3/4HP motors with Grove Gear gear reducers Leeson Motors: 3/4 HP, 230/460 Volt, 3 Phase, 1725 RPM, 60 Hz, Frame: C56C, TEFC Enclosure Grove Gear reducers: Model: L-HMQ252...

Union Process Batch Attritor Mill Model 15S

• Manufacturer: Union

ITEM #: 15669 Used Union Process Batch Attritor Mill Model 15S Union Process Batch Attritor Model 15SVariety Steel Fabricators Pressure VesselSerial No: 5776, Pressure on Jacket: 100 PSI @ 350° F5HP Reliance Moto...

2" Dia. Stainless Steel Vibra Screw Inc Volumetric Feeder

• Manufacturer: Vibra Screw Inc.

Serial # 761007. All product contact surfaces are stainless steel. Covered, 0.5 cubic foot loading hopper with 10"Ø inlet sleeve. Auger: Ø2.0" helical auger, 38" long with drop-out can, 163 RPM (max) Drive: 3HP T...