Used Reactors in New Jersey, USA

Glass Lined Parts 189.3 L (50 gallons) Glasslined - IPP# 100251

• Manufacturer: Universal Glasteel Equipment

2 1/2" dia x 42" long glass lined dip tube. W/50 gal P Series reactor. Fits 4" flange.

Manway Cover Glass Lined Parts 7,571 L (2,000 gallons) Glasslined - IPP# 96053

manway cover W/hinges 4" flush sight glass nozzle, 2" flush sight glass nozzle. Fits 2,000 gal RA Series reactor.

Manway Cover Glass Lined Parts 113.6 L (30 gallons) Glasslined - IPP# 226578

• Manufacturer: Pfaudler

FV/30 psi at 450 degrees F. Fits a 20 or 30 gallon "P" series reactor. One 4" hand hole, One 2" agitator nozzle with bosses, two 2" nozzles, and two 1.5" nozzles.

Glass Lined Parts 113.6 L (30 gallons) Glasslined - IPP# 222875

• Manufacturer: International Process Plants

23" OD 20" ID For a 20 and 30 gallon reactor Pressure rating: 30 and 130 psi Nozzles: One 4" nozzle One 2" nozzle Two 1.5" nozzles One 2 3/8" center drive nozzle with three bosses for agitator mounting.

Manway Cover Glass Lined Parts 113.6 L (30 gallons) Glasslined - IPP# 109978

• Manufacturer: Universal Glasteel Equipment

P-series reactor cover Handway assembly: (1) 4 inch (1) 3", (1) 2", (2) 1 1/2", (1) 2 3/8" center agitator nozzle (3) drive bosses Pressure rated 150psi

Main Cover Glass Lined Parts Glasslined - IPP# 224476

• Manufacturer: International Process Plants

One 14" x 18" man way

Baffle Glass Lined Parts 3,785 L (1,000 gallons) Glasslined - IPP# 224377

• Manufacturer: Pfaudler

Pfaudler flange mount beaver tail baffle. Fits 6" nozzle. Fits a 1000.

Main Cover Glass Lined Parts Glasslined - IPP# 233719

• Manufacturer: International Process Plants

One top head assembly with cover, drive agitator and baffle. Has holders and clamps with hand way. 2.5 DTW drive system with motor.

Glasslined Baffle Glass Lined Parts - IPP# 216688

• Manufacturer: DeDietrich

with uni-tip 164" wet length 174" over all length x 10" wide Flange mount designe for 12" nozzle. 20" x 20" square flange with 16 bolt holes.

Baffle Glass Lined Parts 11,356 L (3,000 gallons) Glasslined - IPP# 216683

• Manufacturer: Pfaudler

Used 129 1/2" wet length (143" over all length including terminal head for TMI sensor) Flange mount design for a 8" nozzle 12" od flange

IPP# 221670, Toulene Recovery System -18 mt/hr Petrochemical

• Manufacturer: International Process Plants

This all stainless steel, dual-column distillation system was designed by Sabic to separate and purify up to 18 mt/hr of toluene from a complex mixture including isomers, Bisphenol-A, and water. The system consis...

Glasslined Baffle Glass Lined Parts - IPP# 240755

• Manufacturer: International Process Plants

Additional Info:

STAINLESS STEEL JACKETED TANK 500 Gallon

• Manufacturer: STAINLESS STEEL JACKETED TANK

Used Approximately 500 Gallon 316 Stainless Steel Jacketed Tank Capacity: 500 gallons Dimensions: 54" dia. x 4' straight side Jacket pressure: 150 psi @ 400°F Material of construction: 316 stainless steel

STAINLESS STEEL JACKETED MIX TANK 1,000 Gallon

• Manufacturer: STAINLESS STEEL JACKETED MIX TANK

Used Approximately 1,000 Gallon Stainless Steel Jacketed Mix Tank Capacity: 1,000 gallons Dimensions: 60" diameter x 6' 6" straight side Top, bridge-mounted agitator with 4-blade mixer Dish top, dish bottom Used ...

750 gal zirconium reactor

Used 750 gallon Zirconium Reactor. Shell rated 50PSI/FV@350F. 304 Stainless Steel Jacket rated 175PSI/FV@400F. Top mounted hastelloy agitator (missing drive). Clamp on shell and bottom head jacket. (4) Lug mounte...