Used Processing in Louisiana, USA

Trusted Seller
Sterling Dual 5 Pound Accumulator Head Blow Molding Machine
- used
- Manufacturer: Sterling
Sterling Dual 5 Pound Accumulator Head Blow Molding Machine Year of manufacture- 1994 Serial number.- 09789 Head configuration- dual 5 pound heads Center to center distances between head dies- 18 1/2¨ Extruder ho...
Harvey, LA
Trusted Seller
Bekum Model BM-806D Continuous Extrusion Blow Molding Machine
- used
Bekum Model BM-806D Continuous Extrusion Blow Molding Machine Year- 2008 Press arrangement- dual sided In machine trimming capability Mold length- 470 mm Mold width- 850 mm Mold depth- 2 x 150 mm Mold daylight- 4...
Harvey, LA
Trusted Seller
Sterling Dual 8 Pound Accumulator Head Blow Molding Machine
- used
- Manufacturer: Sterling
Sterling Dual 8 Pound Accumulator Head Blow Molding Machine Year of manufacture- 1987 Head configuration- dual 8 pound heads Center to center distances between head dies- 26 1/2¨ Extruder horse power.- 150 Hydrau...
Harvey, LA
Trusted Seller
Sterling Model SE303D Dual 3 Pound Accumulator Head Blow Molding Machine
- used
- Manufacturer: Sterling
Sterling Model SE303D Dual 3 Pound Accumulator Head Blow Molding Machine Shot size- 3 pounds Head configuration- dual 3 pound head with 18” center to center distances between heads Extruder diameter- 3” Extruder ...
Harvey, LA
Trusted Seller
Half Gallon Water Mold
- used
Half Gallon Water Mold Model number – 70219 Neck finish diameter – 38 mm To make dairy/milk/water/juice bottles Currently configured to run on a Uniloy type reciprocating screw blow molding machine 5 available Co...
Harvey, LA
Trusted Seller
Sidel Model SBO 10 PET Reheat Stretch Blow Molding Machine
- used
- Manufacturer: Sidel
- Model: SBO 10
Sidel Model SBO 10 PET Reheat Stretch Blow Molding Machine Year of manufacture- 1994 Series 1 machine Number of cavities- 10 Production capacity- maximum nominal output- approximately 12,000 bottles per hour Type...
Harvey, LA
Trusted Seller
Bekum Model H-155 Continuous Extrusion Blow Molding Machine
- used
Bekum Model H-155 Continuous Extrusion Blow Molding Machine Serial number- 991405-5-158 Extruder diameter- 90 mm Mold width- 420 mm Mold length- 320 mm Mold depth- 2 x 130 mm Daylight opening- 250 mm Clamp tonnag...
Harvey, LA
Trusted Seller
Foremost Model 06/21 Proportional Loader
- used
- Manufacturer: Foremost
Foremost Model 06/21 Proportional Loader Volume – 0.6 cubic feet Diameter – approx. 14″ Length – approx. 24″ Inlet Size – 2” Outlet Size – 2” Condition- Very good 2 available
Harvey, LA
Trusted Seller
INGERSOLL-RAND UP6-30-125 12 COMPRESSOR
- used
- Manufacturer: Ingersoll Rand
- Model: UP6-30-125
MAX PRESSURE 125 PSIG, CFM AT MAX PRESSURE 125. S/N PY3259U10267 LOCATED AT 899 REES ST., BREAUX BRIDGE, LA 70517 PREVIEW AND LOAD OUT BY APPOINTMENT ONLY.
Livingston, LA
Trusted Seller
2021 Carrier 30RAP020
- refurbished
- Manufacturer: Carrier
- Model: 30RAP020
Equipment condition: Unused | Voltage and phase: 460/60/3 | Compressor type: Scroll compressor | Condenser type: Air-Cooled | Refrigerant type: 410A
Denham Springs, LA
Trusted Seller
2017 Trane CGAM052
- refurbished
- Manufacturer: Trane
- Model: CGAM052
Equipment condition: Great Condition | Voltage and phase: 460/60/3 | Compressor type: Scroll compressor | Condenser type: Air-Cooled | Refrigerant type: 410A
Denham Springs, LA
Trusted Seller
2019 Trane CGAM070
- refurbished
- Manufacturer: Trane
Equipment condition: Good condition. Chiller has less than 2000 hours. | Voltage and phase: 460/60/3 | Compressor type: Scroll compressor | Condenser type: Air-Cooled | Refrigerant type: 410A
Denham Springs, LA
Trusted Seller
2008 Trane CGAF030
- refurbished
- Manufacturer: Trane
Call or email to find out about our extended inventory.
Denham Springs, LA
Trusted Seller
2005 Trane RTAA 080
- refurbished
- Manufacturer: Trane
Voltage and phase: 240 Volt 3 Phase | Compressor type: Screw | Condenser type: Air | Refrigerant type: R-407
Denham Springs, LA
Trusted Seller
2010 CED Pre-Weigh Super Sack Bagging Plant
- used
- Manufacturer: CED Packaging
CED 4 station Pre-Weigh FIBC (super sack) filling system (bagging plant); 30 bags(metric ton)/hour per station; 120 bags/hour total; each station has 130 c.f. stainless hopper with 10" valves; load cell supports;...
New Orleans, LA