Used Heat Exchangers in New Jersey, USA

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 216127

• Manufacturer: Graham

Flash condenser for a column condenser (IPP # 216020) Duty: 2,957,440 BTU/hr.

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 216085

• Manufacturer: Graham

Cooling water lines: two 8" lines. 2 pass design

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 245829

• Manufacturer: Alfa Laval

carbon steel pressure plates and frame,

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 81090

• Manufacturer: Paterson Kelly

304SS plates Max working pressure 100 psi @ 200 deg F

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 233721

• Manufacturer: APV

316 SS plates with CS frame, rated for 199585 lbs./hr. water and 210539 lbs./hr. glycol.

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 232711

• Manufacturer: APV /Hebeler

Minimal design metal temp.=-20 degrees F at 200 psi.

Block Heat Exchanger 187.5 m² (2,018 ft²) - IPP# 246426

• Manufacturer: Kapp

Additional Info:

Stainless Steel Austenitic Air Fin Heat Exchanger - IPP# 222358

• Manufacturer: Balke Durr

fin fan overhead cooler design pressure 3.2 bar @ 135 degrees C working pressure 1 bar @ 60 degrees C fins are 54mm diameter (2) appox 46.5 m3/second type LPVT 4 ventilator fans mounted underneath 2500mm diameter

APV SR6-GLM-T

• Manufacturer: APV - Gaulin

Used approx. 275 Sq.Ft. APV Crepaco, Titanium, Plate Exchanger, Model # SR6-GLM-T. Rated for 100 psi @ 200 F. (37) 20" x 56" Titanium Plates with EPDM Gaskets. 5' 11.75" High x 20" Wide x 4' 2.5" Deep. Serial #76...

Shell and Tube Heat Exchanger 127.7 m² (1,375 ft²) Stainless Steel 316 - IPP# 83808

• Manufacturer: Heat Exchanger Service

Stainless Steel Graham heat process ltd AEL-762-4878 Shell and Tube Heat Exchanger - IPP# 221548

• Manufacturer: Graham

multi-pass tubeside (2) carbon steel channel heads

Hastelloy C22 Calorifier Shell and Tube Heat Exchanger - IPP# 247267

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 229451

Duty: 1.41 MW

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 246071

• Manufacturer: Ward Tank Co

Note: the NB Papers report this unit to be vertical, however it is set to be in the horizontal position. (AS)

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 246073

• Manufacturer: Atlas Industrial

Tema Type BEM size 48-240 Vacuum Condenser