Used Extruders

Extruder

No Nameplate Name: Extruder | Arrival date: 05-29-2025 | Dimensions l x w x h (inches): 65 x 67 x 80 | Weight (lb.): 4090 | Available quantity: 1

Extruder

No Nameplate Name: Extruder | Arrival date: 05-29-2025 | Dimensions l x w x h (inches): 66 x 65 x 80 | Weight (lb.): 3770 | Available quantity: 1

Extruder

No Motor Name: Extruder | Arrival date: 04-25-2025 | Dimensions l x w x h (inches): 52 x 32 x 57 | Weight (lb.): 595 | Available quantity: 1

Extruder

8.4/4.2a, 1755 Rpm Name: Extruder | Arrival date: 04-07-2025 | Dimensions l x w x h (inches): 34 x 47 x 56 | Capacity: 3 HP | Electrical: 3/50/60/230/380/460 | Weight (lb.): 935 | Available quantity: 1

GEA/Niro/Aeromatic E140 Radical Basket Extruder

• Manufacturer: Niro

GEA/Niro/Aeromatic E140 Radical Basket Extruder - Stainless steel contact parts - NICA system control panel - Nominally rated 0.5-2 kg/minute capacity - 0.37 kw, 20-160 rpm feeder motor - 0.75 kw 20-140 rpm impel...

Hpm Extruder

• Manufacturer: HPM

75 Hp, 1750 Rpm Name: Hpm Extruder | Arrival date: 06-26-2025 | Dimensions l x w x h (inches): 159 x 95 x 70 | Capacity: 3 1/4" X 154" | Electrical: 150/300/500V | Weight (lb.): 8430 | Available quantity: 1

Royle Extruder

• Manufacturer: Royle

Name: Extruder | Arrival date: 07-11-2025 | Dimensions l x w x h (inches): 70 x 65 x 71 | Capacity: 3" | Weight (lb.): 1670 | Available quantity: 1

Gloucester Extruder

• Manufacturer: Gloucester

4.5" Gloucester Extruder / Screen Changer 30:1 L.D. Water Cooled 200 HP D.C. 5 Barrel Vents 5 Die Zones Barber Coleman Series 10 Digital Controllers P.E.T. Last Material Run 1 Spare Screw 4.5" Extech Slide...

The Bonnot Company Extruder

• Manufacturer: Bonnot

W/electrical Cabinet, Hydraulic Units, 8" X 29" Opening, (3500#) 127x54x67, (612#) 79x61x20, (1600#) 90x48x53, (790#) 56x37x43, (210#) 36x21x56, *contains 5 Pieces

Bonnot Single Screw Extruder

• Manufacturer: Bonnot

Bonnot Single Screw Extruder Used Bonnot single screw extruder, model 2", stainless steel barrel and screw, with approximately 2" diameter X 10" long jacketed barrel with Pin and Grooving barrel, 6" x 4.5" feed t...

Jinhu 92MM Twin Screw Extruder

• Manufacturer: Jinhu

92 MM Jinhu Twin Compounding Extruder 150 HP 480V ABB Drive 1 Spare Distributor Gearbox 1 Spare Reduction Gearbox 1,288 Running Hours Used to process PE

WLS GABLER Mirrored Extruder System

• Manufacturer: WLS - Gabler

WLS GABLER Mirrored Extruder System Used WLS Gabler Spheronizing Pelletizing line, dual extruders into single spheronizer, stainless steel product contact surfaces, with (2) TA800/2 �agitated twin discharge screw...

0.375" Randcastle Microtruder Extruder, Model RCP-0375

• Manufacturer: Randcastle

0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used 0.375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed se...

LCI Extruder, model MG-55

• Manufacturer: LCI Fuji Paudal

LCI Extruder, model MG-55 Used LCI Extruder, model MG-55, stainless steel construction, with controller, 1 hp motor, 230 volt, serial# 3511953, built 2006.

3.5" Davis Standard Cold Feed Rubber Extruder

• Manufacturer: Davis-Standard

3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...