Used Extruders in New York, USA

1 1/4″ Davis Standard Extruders (Stripers) 4 Available

• Manufacturer: Davis-Standard

3.5″ Davis Std. 30:1 Air Cooled Extruder

• Manufacturer: Davis-Standard

3 1/2” Davis Standard 30:1 150 H.P. A.C. Air Cooled 350 to 400 # per HR. Material Poly No Clamp Bolt on Front End 17:1 Gear Ratio 100 RPM 5 Barrel Zones 4 Die Zones

6″ Davis Standard 30:1 Extruder

• Manufacturer: Davis-Standard

3.5″ Davis Std. Rubber Extruder – New 2006

• Manufacturer: Davis-Standard

3.5″ Davis Std. Rubber Extruder – New 2006 Model 35IN35DSRE 20:1 L/D Ratio Gearbox Ratio: 17.39.1 257 HP DIMENSIONS: 66″W x 120′ L x 78″ High Dyn. Thrust Cap. 408,300 lb. Dyn Thrust Cap. 185,204 KG Liters: 6 WE...

American Kuhne AK120mm 30:1 Single Screw Extruder 2013

• Manufacturer: Kuhne

American Kuhne AK120mm 30:1 Single Screw Extruder 2013 Screw Size: 120 mm 30:1 L/D Ratio 200 HP motor Digital Controls 42″ Centerline Height Electrically heated – Air Cooled Barrel 480v

6″Merrit Davis 36:1 Extruder w/Side Stuffer

Merritt Davis 6″ Extruder. 36:1 L/D. Vented barrel with 18″ air operated side stuffer. Air-cooled. 600HP DC motor with Control Techniques drive. Control cabinet with Allen Bradley SLC 5/03 PLC and Cutler Hammer P...

6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER

• Manufacturer: NRM

6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER REBUILT – approximately 43″ centerline height, gearbox having new bearings and seals with cooling system – new heat exhanger and pump, 30:1 L/D 8 zone barrel, cast...

1998 Milacron Apex 6.0 Extruder

• Manufacturer: Milacron

65" X 24" Cinn/HPM w/6" Ext. 65" X 24" No wind or shear 1998 Used 65" wide Cincinnati Milacron/ HPM 1998 sheet extrusion line last used on PET at Approx 1500-1800 Lbs/Hr. Includes the following: 6" HPM extruder 3...

2.5″ Davis Std 24:1 Air Cooled Extruder #25MK5 -2001

• Manufacturer: Davis-Standard

2.5″ Davis Standard 24:1 Air Cooled Extruder 2001 – MODEL 25MK5 24:1 Air Cooled – Non-Vented

3.5″ NRM PM70 -24:1 N/VENTED AIR COOLED EXTRUDER

• Manufacturer: NRM

Cincinnati Extruders (TC 86mm) CM 80 – CM 111(Several of each)

• Manufacturer: Cincinnati

2.5″ Davis Std. 24:1 Air Cooled Extruder – 2001 Model 25MK5

• Manufacturer: Davis-Standard

2.5″ Davis Std. 24:1 Air Cooled Extruder – MDL 25MK5 – NEW 2001 Air Cooled – 24:1 Non-Vented

6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder

• Manufacturer: Davis-Standard
• Model: Thermatic

6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder 6″ Davis Standard Model 600S Thermatic Extruder 8″ x 8″ water cooled square feed throat, all new gearbox bearings (less thrust) 17.21 gearbox rat...

75mm Davis Standard “Super Blue” Extruder 24:1 – Air Cooled 2013

• Manufacturer: Davis-Standard

6″ Davis Standard 34:1 -500 HP -Vented (2 vents) Extruders (2 available)

• Manufacturer: Davis-Standard

6″ Davis Standard 34:1 -500 HP -Vented (2 vents) Extruders (2 available)

Mazzoni B100 Extruder

• Manufacturer: Mazzoni
• Model: B100

Good condition Mazzoni B100 Extruders. Located in USA and other countries. Click request price for more information.