Used Dryers in West Virginia, USA

2018 Hankison 1550 CFM Dryer

• Manufacturer: SPX Hankison

1550CFM Dryer Hankison 1550cfm dryer, skid-mounted 1455 hours since New Needs Paint good running unit

Walton Stout Desiccant Dryer System

• Manufacturer: Walton Stout

Power requirements: 3 Phase, 460 volt, 60 hz, 16.7 amps Inlets: (3) 3.5" Ø ID / 11" Ø Flanged Outlets: (3) 4" Ø with actuated slide gate valves

Wyssmont Turbo-Dryer Model N-28

• Manufacturer: Wyssmont
• Model: N-28

Serial No: J-256 Product contact materials are 304 stainless steel. Structural steel support frame with 2" thick insulated panels. Base area is a ten-sided shape measuring 9'-6" across corners and a 13'-10" roof ...

Natural Gas Train for rotary dryer

Includes double block and bleed safety shut off, control metering valve, and pressure switches.

Wyssmont Turbo Tray Dryer Model N-22

• Manufacturer: Wyssmont

Structural steel support frame with 1.5" thick insulated panels, stainless steel sheet cladded. Base area is a decagon shape measuring 9'-9" across corners 12'-0" roof height with a 5" step-down level. Dryer Tray...

Carman Industries Vibrating Fluid Bed Dryer Cooler Processor

• Manufacturer: Carman Industries, Inc.

Processor Design Data: 5,000 LBS/hr 1/8"Ø peppercorns (35 PCF) Product Moisture: 14% max. in / 9% max. out Product Temperature: 180°F max. in / 100°F max. out Dryer bed is 40" wide with an 8'-0" long drying zone ...

Wyssmont Turbo Tray Dryer Model N-16/22

• Manufacturer: Wyssmont
• Model: N-1622

Serial No: J-121 Structural steel support frame with 1.5" thick insulated panels, stainless steel sheet cladded. Base area is a decagon shape measuring 9'-9" across corners and a 11'-7" roof height. Dryer Trays: ...

Stelter & Brinck Direct-Fired Spray Dryer Calciner / Roaster

Used stelter & brinck spray dryer / roaster This is a direct fired air heater which will heat the process stream to a maximum temperature of 2,400°F. Shell: The heater shell is comprised of 7 gauge crs with suita...

Mahle Druckluft Refrigerated Compressed Air Dryer

• Manufacturer: Mahle

Contact us for more information. Cfm: 0

Carrier Inconel 600 Fluidized Bed Dryer - QAD-2460S

• Manufacturer: Carrier

Three zone processor with a 24"W X 20'-6"L perforated drying deck Construction: Cover- 14Ga Inconel 600 sheet Deck- 3/16" Inconel 600 formed & drilled plate Plenum- 1/4" Inconel 600 plate Design Capacity: 756 LBS...

Stainless Steel Bepex Solidaire Paddle Dryer Cooler SJS-16-10

• Manufacturer: Bepex

The Solidaire paddle dryer system is a continuous, thin-layer paddle-dryer that provides extremely efficient thermal treatment. Ultra-high thermal efficiency High speed paddles break up loose agglomerates without...

Hosokawa Bepex Solidaire Paddle Dryer Cooler Mdl Sj-16-10

• Manufacturer: Bepex

S/N SJ-94002238. Carbon steel contact parts. The Solidaire paddle dryer system is a continuous, thin-layer paddle-dryer that provides extremely efficient thermal treatment. Ultra-high thermal efficiency High spee...

Carrier Fluid Bed Dryer 36" x 60" - Model FCAD-3660S

• Manufacturer: Carrier

Serial No 20770 Carrier Fluid Bed Dryer 36" x 60" The fluid bed has 1/8"Ø perforations. Model No: FCAD-3660S Serial No: 20770 Stroke: 3116 RPM: 897 Volts: 460 Stelter and Brinck Natural Gas Furnace: 1.35 mmBTU/Hr...

24 inch Christian Engineering Thermal Hollow Screw Cooler / Dryer Processor

• Manufacturer: Christian Engineering

Outer jacketed U-trough, 25" wide, 29" depth, 22'-0" long, bolt-on sectional cover. Approximate 12" elevation drop to the drive end discharge (25"W X 18" flange). Single hollow-screw auger with 6" flighting pitch...

75HP Bepex Solidaire Jacketed Paddle Dryer Polymer Processor System

• Manufacturer: Bepex

The Bepex Solidaire (Model SJ 30-14) has a flexible design for continuously processing solids (powders, polymers & pigments) in chemical or plastics industries. The Solidaire housing is 30" in diameter and a len...