Building Filters
- Trusted Seller
2005 FRAC BLENDER TRAILER
2005 Frac Blender Trailer - Trailer-mounted frac blender unit - Engine: Detroit Diesel - Blending Capacity: Capable of mixing fracturing slurries at up to 120 BPM - Heavy-duty hydraulic hoses - Additive System: ...
Fort Worth, TX - Trusted Seller
MJK1283 Double Trough Paddle Blender
1- Double Trough Paddle Blender 5 ¼” opening Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience. Load Out: Skidding:
Fort Worth, TX - Trusted Seller
2019 NRG Blender
- Manufacturer: NRG Blender
TWIN CAT C18 DIESEL ENGINES, CAT CX35-P800 TRANSMISSION, MTD ON NGR T/A TRAILER HOURS, HYD-9212 / DISCHARGE-9067
$750,000 USDFort Worth, TX - Trusted Seller
Trailer Mounted Frac Blender
Trailer Mounted Blender - Ready to work and can be tested prior to purchase - 14L 630HP - Rebuilt Gearbox - Ready to Work! - Can be Tested Prior to Purchase - VIN: 5DDKM362351001938 - (2) Detroit Series 60 Diese...
$120,000 USDFort Worth, TX - Trusted Seller
2005 Trailer Mounted Frac Blender
2005 Frac Blender • Model: Trailer-mounted frac blender unit for oilfield operations • Engine: Powered by a Detroit Diesel engine for reliable performance • Blending Capacity: Capable of mixing fracturing slur...
$25,000 USDFort Worth, TX - Trusted Seller
BABCOCK GARDNER LTD.-PLOW BLENDER/MIXER WITH GEAR DRIVE AND MOTOR
- Manufacturer: Babcock Gardner
BABCOCK GARDNER LTD.-PLOW BLENDER/MIXER No jacket, center outlet bottom nozzle, control panel included DIMENSIONS: CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change a...
Houston, TX - Trusted Seller
B&P LittleFord LLC-PLOW BLENDER/MIXER WITH GEAR DRIVE AND MOTOR
- Manufacturer: Falk
B&P LITTLEFORD LLC-PLOW BLENDER/MIXER Two choppers, no nameplate, no jacket, center outlet bottom nozzle, connected to an electric motor (no nameplate) and a Falk gear box, input speed, output speed GEAR DRIVE: D...
Houston, TX - Trusted Seller
AMERICAN PROCESS SYSTEMS-PLOW BLENDER/MIXER WITH GEAR DRIVE AND MOTOR
- Manufacturer: Falk
AMERICAN PROCESS SYSTEMS-PLOW BLENDER/MIXER Two choppers, no nameplate, no jacket, center outlet bottom nozzle, connected to an electric motor (no nameplate) and a Falk gear box, input speed, output speed GEAR DR...
Houston, TX - Trusted Seller
Stainless Steel Thermal Blender Kettle 40"x27" with Stainless Steel Mixer Blade Process Engineering Equipment
“In excellent condition.” Includes Stainless Steel Blade Simmons Controller Master Gear Motor 238778 Serial: DR 19836; Frame: 204SP; RPM 1725 208-220-460/60/3 48"x39"x76" Approx. 146 gallons Room 5 Unit 992
$28,000 USDChico, TX - Trusted Seller
$150,000 USDWest, TX 
BLENDERS 103306
- Manufacturer: Patterson-Kelley
60 LB PER CUBIC FOOT MATERIAL DENSITY WITH INTENSIFIER BAR; TWIN SHELL INTENSIFIER BLENDER GEAR DRIVE; MAIN DRIVE: U-L CODED 25 HP; 1770 RPM; 208-220/440 VOLTS; INTENSIFIER DRIVE: 10 HP; 1760 RPM; 220/440 VOLTS;...
Cleveland, TX
BLENDERS 107280
- Manufacturer: GAULD
TWIN PADDLE MIXER/FEEDER; BUILT IN 1990; 4" DIAMETER SHAFTS; 18" X 5' LONG TROUGH; PADDLE RPM 61;
Cleveland, TX
BLENDERS 107279
- Manufacturer: GAULD
TWIN PADDLE MIXER/FEEDER; BUILT IN 1990; 4" DIAMETER SHAFTS; 18" X 10' LONG TROUGH; PADDLE RPM 61;
Cleveland, TX
BLENDERS 114583
- Manufacturer: Kason
Used Double Ribbon Kason Blender. 18 cubic feet capacity. Inner Ribbon: 1 5/8"w x 3/8"thk.; Outer Ribbon: 1 1/4"w x 3/8"thk. Trough Dimensions: 35"L x 32"w x 26"d. Shaft diameter 3 1/4". Motor: 4 hp, 3 phase, 60 ...
Cleveland, TX
BLENDERS 114577
- Manufacturer: Kason
Used Double Ribbon Kason Blender. 18 cubic feet capacity. Inner Ribbon: 1 5/8"w x 3/8"thk.; Outer Ribbon: 1 1/4"w x 3/8"thk. Trough Dimensions: 35"L x 32"w x 26"d. Shaft diameter 3 1/4". Motor: 4 hp, 3 phase, 60 ...
Cleveland, TX
