Used instruments in Shanghai, China

APS-T90 Split Type Projection Perimeter

APS-T90 Visual Field Perimeter Features: Stimulate point appearing way: Optical projection | Detection method: Static perimetry | Detection range: 0-90 degree | Background light: Yellow, white | Background bright...

APS-6000CER Visual Field Perimeter

APS-6000CER Visual Field Perimeter Stimulator screen: Hemispherical bowl, radius 30cm integrated | Stimulus source: Light emitting diode, wave length 580nm-650nm | Stimulus size: 2mm | Stimulus intensity: 2.5-100...

APS-6000BER Visual Field Perimeter

APS-6000BER Visual Field Perimeter Features: Ø The price not include PC, printer, table. Ø If needs table, price adds USD150. Ø If needs host of computer, price adds USD550. Ø If needs printer and computer, price...

Rotor testing panel WIND-RT-1

• Manufacturer: Shanghai Wind Automation Equipment

Test item: Porosity, sand holes,residues on bars,undercasting, declination error,internal short circuit in bars Alignment of core with bar Improper end ring (Extra cost needed） Ask: Why the waveform next to the A...

SG61000-5 Surge Generator

The SG61000-5 series Lightning Surge Generator (also known as Lightning Surge Immunity Tester, Combination Wave Generator, Current Surge Generator, Voltage Surge Generator, or Combined Voltage and Current Surge G...

Enameled Wire Resistance Tester

• Manufacturer: Trihope

• Detect enameled wire conductor resistance and resistivity • To set two kinds of materials and to meet market demand. • The results will appear on LCD touch screen. According to the sample resistance to select g...

Partial discharge dector

• Manufacturer: Trihope

The PD detector is mainly used for power transformer, HV CT/PT, arrester, HV switch, HV XLPE cables, etc.The test is based on apparent charge measuring description as per IEC 270. The calibrated charge is generat...

GNGPL-BS1363 Plugs Socket Outlets Gauges for BS1363 of British Standard

• Manufacturer: Lisun

Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to BS 1363 standards. And the mainly application industries is electroni...

SUG255 Impulse Withstand Voltage Tester

The SUG255 Series Impulse Voltage Generators | Impulse Generators is a high-precision testing device focused on insulation performance detection of electronic and electrical equipment. The function is to output s...

VVLA-30M Three Loop Antenna

The three loop antenna VVLA-30M is a standard measurement antenna according to CISPR15-2018 GB17743-2007 EN55015 standard

RWG61000-12 Ring Wave Generator

The RWG61000-12 series Ring Wave Generator | Ring Wave Simulator is used to simulate ring wave interference encountered by electronic and electrical products (EUT) in real-world such as damped oscillation pulses ...

EFT61000-4 EFT Immunity Measurement

The EFT61000-4 series EFT Immunity Measurement (also known as EFT Burst testing, Fast Transient Pulse Generator, Fast Transient Burst Simulator) is a high-precision device designed specifically for electromagneti...

EMI-9KC/EMI-9KB EMI Receiver System

• Manufacturer: EMI

The EMI-9K series EMI Receiver Test System (also known as EMI Test Receiver System, Electromagnetic Interference Test system or EMI Test System) is designed to measure the conducted interference (propagated throu...

RFCI61000-6 RF Conducted Immunity Test System

The RFCI61000-6 series RF Conducted Immunity Test System is used to simulate conducted interference signals induced by radio frequency (RF) fields. These signals are injected into the power and signal lines of th...

GNGPL-5751 Go Gauges and Not Go Gauges of EN 50075 Figure 1

• Manufacturer: Lisun

Application: Go Gauges and Not Go Gauges of EN 50075 Figure 1 are used to test and inspect the structure and size of plugs and sockets conform to EN 50075 ( BS EN 50075:1991 ) standards. And the mainly applicatio...