Pre-Owned Paul O Abbe Jar Rolling Mill – 3” x 60” Rolls, 86-258 RPM
used
- Manufacturer: Paul O. Abbe
52710004 Used Paul O Abbe Single Tier Jar Rolling Mill Enclosure, Model JRM. 3" Diameter x 60" wide rolls. Roll speed: 86 to 258 rpm, set rolls at 169 rpm. Approximate 3/4hp, 3/60/230/460 volt, motor. Sound atten...
- Trusted Seller
Paul O. Abbe Lab Jar Rolling Mill LJRM-202421 Process Engineering Equipment
used
- Manufacturer: Paul O. Abbe
“In good working condition.” Paul O. Abbe Lab Jar Rolling Mill LJRM-202421 These units retail for $6,800 Background items in the photos are not included. ABBE Jar Rolling Mills are designed to support and rotate ...
- Trusted Seller
Paul O Abbe 20 QF. V blender stainless steel with covers and valve #3653332
used
- Manufacturer: Paul O. Abbe
Paul O Abbe 20-Cubic-Foot V Blender. Stainless steel construction with covers and a discharge valve for mixed material efficiency.
Florida, USA - Trusted Seller
30 CU. FT. PAUL O. ABBE DOUBLE CONE BLENDER – RUBBER LINED
used
- Manufacturer: Paul O. Abbe
1 – used 30 cu ft Paul O. Abbe Double Cone Blender. 30 cu ft working capacity 54 cu ft Total capacity. Rubber lined. 54 in. inside dia. with 14 in. dia. inlet and 8 in. dia. discharge equipped with butterfly valv...
USA - Trusted Seller
Paul O. Abbe 3 ft. x 8 ft. Ball Mill
used
- Manufacturer: Paul O. Abbe
Carbon steel construction. 36 in. diameter. 96 in. long jacketed chamber. Internal lifter bars. Jacket rate 14 psi with rotary union. Outboard roller bearings. 20 hp motor . Belt driven through Falk gear reducer....
United States - Trusted Seller
UNUSED 2.4 CU. FT. PAUL O. ABBE DOUBLE CONE ROTA BLENDER - HASTELLOY C-276
used
- Manufacturer: Paul O. Abbe
- Model: RCB-24
1 - unused 2.4 Cu.Ft. Paul O Abbe Double Cone Rota Cone Blender, Model RCB-24, 2.4 Cubic Foot Working Capacity, 3.9 Total, Hastelloy C-276. Bulk density 75 pounds a cubic foot, 150 grit internal finish, 22" diame...
USA - Trusted Seller
5 CU. FT. PAUL O. ABBE DOUBLE CONE VACUUM DRYER - S/S - FV/14.7 PSI
used
- Manufacturer: Paul O. Abbe
1 - USED 5 CU. FT. PAUL O. ABBE DOUBLE CONE VACUUM DRYER - WITH HEATER - Model RCVD 30 - Approx. 5 cu. ft. - S/S Construction - 30" Dia. - Rated Full Vacuum (FV) Internal @ 250 deg. F - Jacket rated 14.7 psi @ 2...
USA - Trusted Seller
Mill, Ball, Batch, 3' x 32", Paul O Abbe, 5 HP, C/st #S738884
used
- Manufacturer: Paul O. Abbe
Paul O'Abbe ball mill, 32" diameter x 36" long (inner measurements) mounted on stand. Unit is carbon steel contacts, jacketed for water cooling. Unit has 9-1/2" x 8" door. Unit has 9-1/2" x 8" door. Includes 5 HP...
San Dimas, CA - Trusted Seller
Mill, Ball, Batch, 3'9" X 4', Paul O Abbe, No Motor, #D739650
used
- Manufacturer: Paul O. Abbe
Paul O. Abbe Model 4A pebble/paint mill, 3' 9" (1.14 m) x 4' (1.22 m), ceramic lined, batch type mill. Total mill volume: 251 gallons. Mill speed: 27 RPM when 50% full of pebbles or porcelain balls, missing hatch...
Oroville, CA - Trusted Seller
Mixer, Paddle, 4.3 CF, 316 S/st, Forberg, Paul O Abbe, AFD-120 #C740472
used
- Manufacturer: Paul O. Abbe
Paul O Abbe Forberg Twin Shaft Paddle Mixer, Model AFD-120, 4.3 Cubic Feet (120 liters), working capacity 0.9-6.0 Cubic Feet, 316 Stainless Steel trough, approximate 33-1/8" long x 28-3/8" wide x 24" deep. (2) 2....
San Dimas, CA - Trusted Seller
Paul O. Abbe 3 ft. x 8 ft. Pebble Mill
used
- Manufacturer: Paul O. Abbe
3 ft. diameter x 8 ft. long jacketed chamber. carbon steel construction. Comes with internal lifter bars. Jacket rated 14 psi with rotary union. Outboard roller bearings on legs. 20 HP Motor: 230/460 volt. 1755 r...
Savona, Canada - Trusted Seller
3L Paul O Abbe S/S Jktd Mixer Vacuum Lid
used
- Manufacturer: Paul O. Abbe
Stainless Steel Jacketed U Trough Mixer With Vacuum Lid
Goole, United Kingdom - Trusted Seller
Paul O. Abbe Not Applicable
used
- Manufacturer: Paul O. Abbe
Used 32 Cubic Feet Double Cone 316 Stainless steel Vacuum Dryer-Blender, Mfg. by PAUL O. ABBE, INC., S/N: A40755. 32 Cu.Ft. total capacity, 20 Cu Ft. working capacity. 1.5 HP gear motor for drive, 5 HP 1165 rpm f...
Red Bank, NJ - Trusted Seller
Paul O. Abbe 84
used
- Manufacturer: Paul O. Abbe
- Capacity: 112 Cu Ft
Used 112 Cubic Feet Stainless Steel Paul Abbe Rota-Cone Blender, Model 84, 84" diameter, rated 80 lbs. / 112 cubic feet maximum material density, stay bolt jacketed shell rated 30 PSI at 275 degrees F, with liqui...
Red Bank, NJ - Trusted Seller
Paul O. Abbe RCB-66
used
- Manufacturer: Paul O. Abbe
- Capacity: 55 Cu Ft
Used 55 Cu Ft Paul O. Abbe Rota-Cone SS Double Cone Blender. Model RCB-66. 304 Stainless Steel. Non-jacketed shell 66" diameter x 25" straight side x 45 degree cones. 16" Diameter inlet, 10" diameter outlet. Shel...
Red Bank, NJ
Tip: Enter manufacturer, model or keyword
