Building Filters

VER5430 – n. 3 Dryers with new frames
Diam. 1500 Width: 2800 | Pressure: 3 bar | Frames: complete, new
Ravenna, Italy
VER5152 – N° 2 Beloit Press Frames
- Manufacturer: Beloit
Ravenna, Italy
1996 Licar (license Lamort) DF1
- Manufacturer: Licar
Diabolo screen Including frame, pulleys, carter and motor
Ravenna, ItalyVER5226 – Escher-Wyss E2K Deflaker – Overhauled
- Manufacturer: Escher-Wyss
This deflaker has been completely refurbished “as new”, standing on a base frame and having a drive motor erected
Ravenna, Italy
VER 5419 – 3400 mm Dryer Section with 48 dryers
N. 47 Dryer cylinders + n. 1 Spare, complete with felt rolls Frames not included Video in operation available on request
Ravenna, Italy
Licar (license Lamort) DT1
- Manufacturer: Licar
Diabolo Screen Basket with holes (holes diameter: 3 mm) Power installed 7,5 kW Stainless steel Some valves Including frame, motor, pulleys and carter
Ravenna, Italy
2001 Comer (very good Italian maker) EC-10
- Manufacturer: Comer
This pressure screen is with stainless steel body, suitable for fine screening. It was previously installed as second stage fine screen in a 200 tpd waste paper line. Scope of supply: Pressure screen on frame wit...
Ravenna, Italy
2006 ST Macchine (very good Italian maker) SPT-120
- Manufacturer: ST Macchine
Pressure Screen Basket perforated area 22.6% (ran only few weeks) Max number of rotor revolutions : 180 rev/min . Scope of supply: Pressure screen on frame with pulleys Screen basket Rotor ABB Motor Assembly draw...
Ravenna, Italy
VER3078 – face 2800 mm, Ø 3200 mm, 3 bar, Toschi MG Cylinder
- Manufacturer: Toschi
Year of construction: 1975 Ø: 3200 mm Face: 2800 mm Working pressure: 3 bars Hydraulic test pressure: 4,5 bars Cast iron Never used still wooden protected With doctor blades Flat press Ø 500 mm With gear and frames
Ravenna, Italy
2000 Comer (very good Italian maker) EC-20
- Manufacturer: Comer
Screen basket size: H: 665 mm x ID: 1050 mm (cca 2,2 m2) 1x 0,30 mm, used in working condition This is a pressure screen with stainless steel body, suitable for fine screening. It was previously installed as firs...
Ravenna, ItalyVER4566 – 20 m3 Low Density Pulper
Stainless steel vat, with big valve for discharging rejects Rotor group complete with 10 throats pulley, Ø 1260 mm Steel plate with 8 mm hole Motor pulley, 260 mm 160 kW, 1470 rpm motor (not included), 320 rpm of...
Ravenna, ItalyVER4836 – Gas hoods for Yankee
Originally for our Yankee (our ref. VER4832 – CLICK HERE ) -4850 mm wet hood for Yankee paper size 2850 mm maximum blowing temperature 510 °C Corten material blowing speed 120 m/s suitable for airsystem duosystem...
Ravenna, Italy
VER5006 – 2910 mm Drying Section
- Manufacturer: Toscotec
Section composed of 12 drying cylinders Complete with frames and felt rolls
Ravenna, Italy
Ravenna, ItalyVER4840 – 2650 mm 6 Drying Cylinders, Ø 1500 mm – dismantled
- Manufacturer: Over Meccanica
N° 6 dryers with face: 2600 mm and Ø: 1500 mm Complete with supports, without bearings and frames Dismantled, well stored inside
Ravenna, Italy
