Used z

ZED Industries Shuttle Sealer, Model Z-MED

• Manufacturer: Zed

ZED Industries Shuttle Sealer, Model Z-MED Used ZED Industries Table top heat sealer press. model Z-MED, Size 10x10, 110 Volt, 1PH, 12 AMP, serial# 907M3291.

54" Gluer - Z54

1/2 Hp, 1725 Rpm Name: Gluer | Arrival date: 10-16-2025 | Dimensions l x w x h (inches): 75 x 33 x 49 | Capacity: 54" | Weight (lb.): 625 | Available quantity: 1

Potdevin 39" Gluer - Z39 62

• Manufacturer: Potdevin

1/2 Hp, 1725 Rpm, Made In Usa Name: Gluer | Arrival date: 10-16-2025 | Dimensions l x w x h (inches): 55 x 34 x 48 | Capacity: 39" | Electrical: 1/60/115/208/230 | Weight (lb.): 575 | Available quantity: 1

Acrison Feeder, Model 105Z-F, S/S

• Manufacturer: Acrison

Acrison Feeder, Model 105Z-F, S/S Used Acrison feeder, model 105Z-F, stainless steel construction, " diameter x " long feed screw, feed hopper with conditioning screw, all driven by approximately 1 hp, dc motor d...

Fox Packaging Stretch Wrapper z23010a

• Manufacturer: Fox Packaging

Fox Packaging Stretch Wrapper. Model FPS 150. S/n 150-100714-013. 5,000# Weight capacity. 1-40 Loads Per Hour. 60” Diameter table. 90” max OD clearance. 65” Vertical Rise. Variable speed 0...

NEDCO E-Z Fold 2000-S

• Manufacturer: NEDCO

Equipment Overview Industrial-grade, pneumatic garment folding machine with integrated bagger and heat-sealer, built for high-throughput operations. Proven model for screen printers, fulfillment centers, and appa...

Acrison Screw Feeder, Model 105Z-B, S/S

• Manufacturer: Acrison

Acrison Screw Feeder, Model 105Z-B, S/S Used Acrison Screw Feeder, Model 105Z-B, stainless steel construction, 17" x 11" agitated feed hopper, 2" diameter screw, with 1 HP motor drive, on unitized base, Serial No...

Infra Pak Stretch Pallet Wrapper Z23059Q

60" Rotary Table 60" Vertical Travel 4000# LOAD CAPACITY Variable Film Carriage Speeds 120 V 114" X 60" FB X 92" Tall 1500 LBS Estimated Weight

Optel Op300 Domino M400-cw100z-280-110/254(127)left Mtds39520 Zebra Ze500 System

• Manufacturer: Domino

“Used” Model number: M400-CW100Z-280-110/254(127)-LEFT MTDS39520 | Mpn: M400-CW100Z-280-110/254(127)-LEFT MTDS39520 | Shipping weight: 638 lbs | Shipping dimensions: 76 x 69 x 61 in | Reference sku: 1703906

16" x 8" Farrel Bridge Inclined Z Calender Mill

• Manufacturer: Farrel

16" x 8" Farrel Bridge Inclined Z Calender Mill Used Farrel Bridge inclined Z style calender mill, (4) 16" roll face width x 8" diameter rolls, cored rolls with rotary unions, manual roll adjustments, individuall...

2020 Arpac Z TS18 DC

• Manufacturer: Arpac

– Dual-axis servo driven cross seal – 9’ dual chain infeed with T-Style Lugs stainless steel washdown design – Next Gen Side Seal with overload and hinge open for easy cleaning – Pinwheel film perforator with bac...

2020 Arpac Z TS18 DC

• Manufacturer: Arpac

– Dual-axis servo driven cross seal – 9’ dual chain infeed with T-Style Lugs stainless steel washdown design – Next Gen Side Seal with overload and hinge open for easy cleaning – Pinwheel film perforator with bac...

Emhart Teknologies 12" Bowl Vibratory Bowl Feeder - Z041 603/120

• Manufacturer: Emhart Teknologies

Tucker Etfccd.31.00 Made In Germany Name: Vibratory Bowl Feeder | Arrival date: 09-19-2025 | Dimensions l x w x h (inches): 28 x 26 x 55 | Capacity: 12" BOWL | Electrical: -/50-60/120 | Weight (lb.): 355 | Availa...

Emhart Teknologies 12" Bowl Vibratory Bowl Feeder - Z041 603/120

• Manufacturer: Emhart Teknologies

Tucker Etfccd.31.00 Made In Germany Name: Vibratory Bowl Feeder | Arrival date: 09-19-2025 | Dimensions l x w x h (inches): 28 x 26 x 55 | Capacity: 12" BOWL | Electrical: -/50-60/120 | Weight (lb.): 355 | Availa...

Goessling 90° Up / Elevating / Z Conveyor | Screw / Bolt / Material Conveyor

• Manufacturer: Correa

Unit is USED / BUT IN VERY GOOD CONDITION. Conveyor shows very little signs of wear. Some scratching / blemishes / worn paint can seen on the conveyor. This unit has been tested as seen in the video and functions...