Used Wood Saws in Chihuahua, Mexico

2018 - OPTIMIZING SAW - DIMTER WEINIG OPTICUT 260

• Manufacturer: Weinig

PART: 12420 - OPTIMIZING SAW BLADE - DIMTER WEINIG OPTICUT 260 USED - VERY GOOD CONDITION Electric: 460 Voltage 60 Cycle 3 Phase GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE. Wo...

VERTICAL SLIDING TABLE SAW - HOLZHER 1265 SUPER CUT

• Manufacturer: Holz-Her

PART: AMX-10073 - VERTICAL SLIDING TABLE SAW - HOLZ-HER 1265 SUPER CUT USED - VERY GOOD CONDITION MOTOR: 4 HP (3KW) 220V, 3 PHASE, 60 HZ 1 8.25" DIAMETER CIRCULAR SAW INSTALLED SCORING KNIFE TABLE DIMENSIONS: LEN...

DOUBLE MITER SAW - CAPACITY 13" - 100" LONG - CTD

• Manufacturer: CTD

PART: 12417 - MITER SAW DOUBLE - CAPACITY 13" - 100" LONG - CTD USED - VERY GOOD CONDITION 3 HP TEFC Dual Voltage Motors Wired for 460 Volt, 3 Phase Start and E-Stop buttons Left head fixed, Right head manually p...

SLIDING TABLE SAW - 2500 MM - MOTOR 5 HP

• Manufacturer: Silverline

SAW SLIDING TABLE SAW - 2500 MM - ENGINE 5 HP USED - VERY GOOD CONDITION Only used to make 1 to 2 closets Model DC-SE2500 SILVERLINE MOTOR 5 HP, 230V, 60 HZ

SC-2910 - CHAIN FEEDER - SCMI MULTIRIP SAW - M3

• Manufacturer: SCM / SCMI
• Model: M3

PART: 2SC-2910 - POWER SUPPLY POWER SUPPLY - MULTIPLE SAW SCMI - M3 Guides Included New with Warranty

MITER SAW - 7.5 HP - 14" BLADE - LEFT HAND SIDE

• Manufacturer: Disco

PART: 12347 - MITER SAW - 7.5 HP - 14" BLADE - LEFT USED - GOOD CONDITION Motor 7.5 HP, 220V, 3 phase 4100 RPM arbor speed Left Hand Model uses a 14" diameter saw blade with 1" bore Cuts boards up to 1" x 10" or ...

AM-3016 - MITER SAW - 16" BLADE - 7.5 HP MOTOR - AMX

• Manufacturer: Disco

PART: 1AM-3016 - MITER SAW - BLADE 16" - MOTOR 7.5 HP - AMX USED - VERY GOOD CONDITION CUTTING CAPACITY: MOTOR 7.5 HP, 230/460V, 3 PHASE, 60 HZ, RPM 3465 MOTOR WIRED 230V, ENCLOSED, US ELECTRICAL MOTORS

SL-DC-TS12 - TABLE SAW 12" - MOTOR 3 HP

PART: 1SL-DC-TS12 - 12" TABLE SAW - 3 HP MOTOR. MOTOR: 3 HP, 110/220V, 60 Hz, 1 PHASE TABLE DIMENSIONS WITH EXTENSION: 27" X 40-1/2 BLADE DIAMETER 12 SHAFT DIAMETER 5/8" BLADE TILT RANGE: 0 TO 45 DEGREES MAX. CUT...

RE-SAWING MACHINE 4 SAWS BAKER

• Manufacturer: Baker

PART # 11815 - RE-SAW - 4 SAWS - BAKER IN VERY GOOD CONDITION Baker 4-Head Rebuild includes New: Belts, Bearings, Sprockets where needed Recrowned Band Wheels Return Conveyor

JG-MAG-JUN640CE - RADIAL SAW - JUNIOR 640CE - 4 HP - 15.75" DISC

• Manufacturer: Disco
• Model: 640 Junior

PART: 2JG-MAG-JUN640CE - RADIAL SAW - JUNIOR 640CE - 4 HP - 15.75" DISC New with warranty Offer adaptability, versatility, precision and durability to shops of all sizes. Maggi has been producing radial arm saws ...

HORIZONTAL RESAWING MACHINE - 1 SAW - WIDTH 12" - RESAWING MACHINE - RETURN MACHINE

PART: 2FA-RE6X12 - HORIZONTAL RESAW - 1 SAW - WIDTH 12" - NEW WITH WARRANTY NEW WITH WARRANTY The widest cutting resaw available in our line of products. If your looking for a low cost solution to cutting up to 1...

RE-SAWING MACHINE - 1 BAND - 12" WIDE BAND

• Manufacturer: Grizzly

PART: 12374 - RESAW - 1 GANG - BAND 12" WIDE - GRIZZLY Used - Good Condition Motor 20 HP, 220/440V, 3 phases Hydraulic unit 2 HP 28" Flywheels 1" shoe

RESAWING MACHINE - 2 BANDS - MORGAN - WITH RETURNER

• Manufacturer: Morgan

PART: 12561 - RESAW - 2 BAND - MORGAN - WITH RETURNER Used - Good Condition Return (needs new belt) 460 V/3ph Equipped with 6" wide infeed and outfeed belt conveyor (hydraulically driven). Equipped with (2) pneum...

MULTI BANDSAW - 12" WIDE - SCM M3

• Manufacturer: SCM / SCMI
• Model: M3

PART: 12272 - MULTI BANDSAW - 12" WIDE - SCM M3 USED - GOOD CONDITION Feed Motor 2.5HP Variable Speed Feed from 30 - 150 FPM Top and Bottom Anti-Kickback Assemblies Pneumatic Pressure Rolls Infeed Rip Fence

SLICER - SLICER - 8 FEET LONG

PART: 11761 - SLICER - SLICER - 8 FT. LONG 8 - SLICER (SLICER) FOR CUTTING FROM .5 MM UP TO 6MM IND. G.H. FOR CUTTING WOOD FROM 8 FEET UP TO 18 INCHES WIDE. WIDTH