Used Wire Machinery in Pennsylvania, USA

Wire Bending Bench

• used

Wire Bending Bench

• used

Wire Guide/Snag Detector

• used

• Manufacturer: fh machinery

Wire Guide/Snag Detector

• used

• Manufacturer: fh machinery

Wire Guide/Snag Detector

• used

• Manufacturer: fh machinery

Traversing Dual Wire Takeup

• used

• Manufacturer: fh machinery

Shaft length: 18" each side | Shaft diameter: 1" | Traverse length: 18" each side | Main drive motor: (2) 1/2 HP | Traversing motor: (2) 1/4 HP | Equipped with: Variable Speed- Each Side Independent

Traversing Wire Take-Up OZ Cams

• used

• Manufacturer: OZ CAMS

STANDARD MACHINERY 084

• used

• Manufacturer: STANDARD MACHINERY

Equipped with: TYPE..............................2 HIGH WIRE FLATTENING MILLMODEL.............................MODEL 084ROLL DIAMETER.....................8" (203MM)ROLL WIDTH........................8" (203MM)ROLL...

OMCG 630

• used

• Manufacturer: OMCG

OMCG 630 WIRE FORMER OMCG 630, 24.8" Max Mechanical Feeding, 0.315" Wire Diameter Range, 1" Strip Width, 0.08" Max Strip Thickness, 2 Plane Straightener, Powered Payoff EQUIPPED WITH: 2 Plane Straightener Powered...

OMCG 250

• used

• Manufacturer: OMCG

OMCG 250 WIRE FORMER OMCG 250, 0.197" Diameter, 0.787" Strip Width, 0.079" Maximum Strip Thickness, 10" Standard Feed Length, 15 hp Motor, 2 Plane Straightener, Powered Payoff, Lube System EQUIPPED WITH: 2 Plane ...

NATIONAL MACHINERY 3/16 SSSD

• used

• Manufacturer: NATIONAL MACHINERY

Maximum wire diameter: 3/16" | Maximum shank length: 1" | Maximum cutoff length: 1-1/2" | Maximum production: 300 PPM | Approx. weight: 4,000 lbs | Equipped with: AC Motor & Controls

LUBOW 4-SAB

• used

• Manufacturer: Lubow

1 wire: 1/2" | 3 wires: 3/8" | 4 wires: 5/16" | 8 wires: 1/4" | 11 wires: 3/16" | 16 wires: 1/8" | Equipped with: Can Make 1,2,3 Or 4 Bends Per Cycle 8' Max Distance Between Bends Up To 40,000 Bends Per Hour Usi...