- Trusted Seller
1987 Nagema GM603A01
used
- Manufacturer: Nagema
Cell width approx. 600 mm Rotary feeder, dosing feeder, product dust feeder, used, 500 x 310 mm Inlet opening approx. 500 x 310 mm / flange approx. 570 x 390 mm Outlet opening approx. 630 x 310 mm / flange approx...
Riesa, Germany - Trusted Seller
Bauknecht Sky SCHL.4.20/SG
used
- Manufacturer: Bauknecht
8 chambers Dimensions length 550 mm width 450 mm height 800 mm with gear motor B3 63D 6 HR 100 L 220/380V IP65 50 Hz 1,10 kW / 21 rpm Untested. The sluice is overhauled and tested for functionality by an electric...
Riesa, Germany - Trusted Seller
1998 Gyro ADG 300/600-21
used
- Manufacturer: Kreisel
Total capacity 7 m³ Stainless steel/VA rotary valve, Product dust dosing rotary feeder -used overhauled- = 3,5 liters per bag = 28 liters results in total capacity of 7 m³ incl. drive gear motor (with brake): SEW...
Riesa, Germany - Trusted Seller
2004 Kreisel RF 77 DT 80N-2
used
- Manufacturer: Kreisel
1,1 kW | 2800/17 rpm stainless steel rotary valve product dust ash sluice dosing sluice 250 x 400 rpm used fabrication no. 41577 With offset bearings, stuffing boxes and speed monitoring. Material housing & cellu...
Riesa, Germany - Trusted Seller
2006 gyro RF 77 DT 80 N4 / TF
used
- Manufacturer: SEW-Eurodrive
ADG 320x600-21-8,3 Stainless steel rotary valve product dust ash sluice dosing sluice as good as new, unused Serial No. 55059-2 With offset bearing, stuffing boxes and attached speed control. Laterally 2 cleaning...
Riesa, Germany - Trusted Seller
2004 Gyro ZST 250x400-21LU
used
- Manufacturer: Kreisel
Stainless steel rotary valve dosing valve used EX II2/3Dc 80°C With offset bearings, stuffing boxes and attached speed monitoring. without drive motor, this can be offered separately and also adapted Total approx...
Riesa, Germany - Trusted Seller
2004 gyro RF 77 DT 80N-2
used
- Manufacturer: SEW-Eurodrive
1,1 kW | 2800/17 rpm stainless steel rotary valve product dust ash sluice dosing sluice 250 x 400 rpm used fabrication no. 41577 With offset bearings, stuffing boxes and speed monitoring. Material housing & cellu...
Riesa, Germany - Trusted Seller
2004 Kreisel ZST 250x400-21LU
used
- Manufacturer: Kreisel
Stainless steel rotary valve dosing valve used EX II2/3Dc 80°C With offset bearings, stuffing boxes and attached speed monitoring. without drive motor, this can be offered separately and also adapted Total approx...
Riesa, Germany - Trusted Seller
2004 Gyro ZST 250x400-21LU
used
- Manufacturer: Kreisel
EX II2/3Dc 80°C Stainless steel rotary feeder tangential feeder product dust ash feeder dosing feeder used With remote bearing, stuffing box and mounted speed monitor. Motor can be offered according to customer's...
Riesa, Germany - Trusted Seller
Rotary feeder dosing feeder 245 mm x 210 mm #B13636
used
- Manufacturer: VEB Maschinen-und Mühlenbau Wittenberg
ZDA 25 TGL-No. 47-122 Rotary valve used Year of construction. 1976 Product type ZDA 25 Product reg. no. 45066 Inlet opening and outlet opening: 245 mm x 210 mm Blow-through rotary valve, discharge rotary valve, d...
Riesa, Germany - Trusted Seller
Waeschle Coperion DK 250.1-8-GC
used
- Manufacturer: Coperion Waeschle
Product Flour powder airlock Rotary valve pressure 1,5 bar Blow-through airlock Waeschle DK 250 OUTPUT AND DOSAGE airlock "Waeschle Coperion DK 250.1-8-GC" used. Synonyms for rotary valve: Blow-through rotary val...
Riesa, Germany - Trusted Seller
Waeschle Coperion ZKD-550.1-96-GC
used
- Manufacturer: Coperion Waeschle
Waeschle Coperion ZKD-550.1-96-GC FTZU 05 ATEX 0004X FTZU 06 ATEX 0039 ATEx rotary valve pressure lock 1.5 bar OUTLET AND DOSAGE SLUICE FOR POWDER "Waeschle Coperion ZKD 550.1-96-GC ATEx" used. Synonyms for rotar...
Riesa, Germany - Trusted Seller
Waeschle Coperion ZKD-480.1-55-AC
used
- Manufacturer: Coperion Waeschle
Waeschle Coperion ZKD-480.1-55-AC large Atex rotary valve pressure lock 1,5 bar OUTLET AND DOSAGE SLUICE FOR POWDER "Waeschle Coperion ZKD 480.1-55-AC" used. Synonyms for rotary valve: Blow-through rotary valve, ...
Riesa, Germany - Trusted Seller
e Double chamber dosing sluice #40000
used
Double chamber metering and mixing feeder, continuous feeder Czech dosing sluice used 12,3 rpm sluice year 1980 Ø sluice approx. 350 mm dosing body made of cast iron 380 V / 1430 rpm gear ratio: 1:56 engl. Change...
Riesa, Germany - Trusted Seller
Blow-through airlock Ø 250 mm 0.66 kW / 30 rpm #B15473
used
blow-through rotary valve, rotary valve, rotary valve, metering rotary valve used AZO Ltd. height approx. 450 mm blow-through rotary valve, feeder, rotary valve, rotary feeder, metering rotary valve rotary valve ...
Riesa, Germany