New Sanders

Laguna PS1 Profile Brush Sander
- new
- Manufacturer: Laguna
The PS1 Profile sander is a 220 Volt Single Phase workhorse. Features include two sanding stations which can be used independently or at the same time with two operators. One station is a sanding belt over a roll...
Dundee, NY
BAILEIGH Belt Sander Tube & Pipe Notchers
- new
- Manufacturer: Baileigh
This abrasive pipe notching machine requires different size mandrels for each different OD intended to notch. Mandrel changing is easy. Just take off the quick change side guard, loosen the belt tension hand whee...
Chicago, IL
Larick 6000 Series Brush Sander
- new
- Manufacturer: Larick
The LARICK 6000 Series machine will brush sand and/or wire brush parts with standard widths of 25, 37 and 49 inches. It has 2 to 6 spindles which will accommodate sanding or wire brushes up to 14 inch diameter an...
Dundee, NY
Northtech NT-RRS80B Round Rod Sander
- new
- Manufacturer: Northtech
The NT-RRS80B is a single head heavy duty sander specifically designed for round rods. It is a heavy duty industrial grade sander that rolls the part against the sanding belt as it is fed through the machine. Var...
Dundee, NY
CARBORUNDUM,38657,80GRIT ZIRCONIA ALUMINA RESIN CLOTH 51"X126 3 BELTS SKID OF 14
- new
- Manufacturer: Carborundum
CARBORUNDUM,38657,80GRIT ZIRCONIA ALUMINA RESIN CLOTH 51"X126 3 BELTS SKID OF 14 BOXES YES YOU WOULD GET FULL SKID FOR THE PRICE OF $1500 What's Included? See photos. We try our best to provide full details of ea...
$1,500 USD
Galion, OH
Northtech NT-ES948SE Edge Sander Single Table
- new
- Manufacturer: Northtech
NT-ES948SE EDGE SANDER SINGLE TABLE Northtech offers a large family of industrial grade edge sanders. The NT-ES948SE falls into the middle of the family of edge sanders and has a 9″x48″ sanding area on one side ...
Dundee, NY
Laguna, Pro 43″ Widebelt Sander
- new
- Manufacturer: Laguna
This machine is equipped with 1 ( 8”) roller and a second (4”) roller followed by a wide platen for a fine finish. This allows you to use a rougher grit on the first roller (8”) that will absorb most of the impac...
Dundee, NY
Powermatic, OES9138 Edge Sander, 3HP 3PH 230V
- new
- Manufacturer: Powermatic
- Model: OES9138
The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...
Dundee, NY
Powermatic, OES9138 Edge Sander, 3HP 1PH 230V
- new
- Manufacturer: Powermatic
- Model: OES9138
The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...
Dundee, NY
Northtech NT-ES1248SE Edge Sander Single Table
- new
- Manufacturer: Northtech
Northtech offers a large family of industrial grade edge sanders. The NT-ES948SE falls into the middle of the family of edge sanders with a 9″x48″ sanding area on one side of the machine along with an end table f...
Dundee, NY
Laguna, Pro 37″ Widebelt Sander
- new
- Manufacturer: Laguna
This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensio...
Dundee, NY
Northtech NT-MBS12-2T1R1OL Moulding Brush Sander
- new
- Manufacturer: Northtech
Machine hp: 5.5 HP. | Direct drive (motor): Sanding Heads | Voltage, frequency: 230/460 Volt 60 Hz | Phase: 3 Phase | Amp requirement: 16.5/8.25 Amps | Configuration: 2 Top 1 Left 1 Right Opposing | 1st head: 1....
Dundee, NY
Safety Speed, 4375 Wide Belt Sander
- new
- Manufacturer: Safety Speed
The 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt translates to increased capacity, less heat accumulation, less maintenance and...
Dundee, NY
Northtech NT-RRS80B2 Round Rod Sander Double Belt
- new
- Manufacturer: Northtech
The NT-RRS80B2 is a two head heavy duty sander specifically designed for round rods. It is a heavy-duty industrial grade sander that rolls the part against the sanding belts as it is fed though the machine. Varia...
Dundee, NY
Laguna, Compact 37″ 1K Widebelt Sander
- new
- Manufacturer: Laguna
This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (10 HP) the machine is capable of dimensio...
Dundee, NY