New Milling Machines in Netherlands

Milling Vice MVB100

• Manufacturer: Rogi

Milling vice with 360º swivel base High quality ductile cast iron Accuracy - parallelism and squareness - 0.025mm/100mm

Milling Stand WMD45

• Manufacturer: Rogi

Milling vice MVB150

• Manufacturer: Rogi

Milling vice with 360º swivel base High quality ductile cast iron Accuracy - parallelism and squareness - 0.025mm/100mm

Milling Vice MVB125

• Manufacturer: Rogi

Milling vice with 360º swivel base High quality ductile cast iron Accuracy - parallelism and squareness - 0.025mm/100mm

Milling Stand WMD30LV

• Manufacturer: Rogi

Milling Stand WMD20LV - WMD25LV

• Manufacturer: Rogi

Machine mount

Available in different sizes Machine mount D80 X M12 X 100 (300KG) Machine mount D120 X M12 X 100 (500KG) Machine mount D160 X M16 X 130 (2000KG) Machine mount D185 X M20 X 130 (2400KG) Machine mount D240 X M2...

Soba - Precision Machine Vise

• Manufacturer: Soba

Manufactured from close grained high tensile seasoned cast iron. The 360º swivel base allows the vice to be set at any angle along with the vertical axis . The jaws are fully hardened and ground with a parallelis...

Soba - Precision Tilting and Swiveling Machine Vise

• Manufacturer: Soba

Manufactured from close grained high tensile seasoned cast iron. The tilting adjustment is achieved via an angular slide that can be set at any desired angle 45ºon either sides. The 360º swivel base allows the vi...

Anayak HVM 7000-MG

• Manufacturer: Anayak

Cnc mark: Heidenhain | Cnc type: iTNC 430 | Construction year: 2002 | Table length: 3.300 mm | Table width: 1.200 mm | Maximum table load: 15,000 & 28,000 kg | X: 6.300 mm | Y: 1.800 mm | Z: 2.500 mm | Recording...

Anayak HVM 7000-MG

• Manufacturer: Anayak

Cnc mark: Heidenhain | Cnc type: iTNC 530 | Construction year: 2005 | Table length: 3.300 mm | Table width: 1.200 mm | Maximum table load: 15.000 & 28.000 | X: 6.300 mm | Y: 1.800 mm | Z: 2.500 mm | Recording: S...

Hermle C 30 U Dynamic

• Manufacturer: Hermle
• Model: C 30 U DYNAMIC

5-axis machining center Design: • 5-axis CNC machining center • Through-spindle cooling Hours:

Rosink 550x550x1.050mm

• Manufacturer: Rosink

Clamping cube provided with M20 threaded holes. Flange fitting size: 700 x 700 mm | Length: 550 mm | Width: 550 mm | Height: 1.050 mm | Dimension of clamping hole: M20 mm | Machine dimensions (l×w×h): 550 x 550 x...

Rosink 1.000x1.000mm

• Manufacturer: Rosink

Table thickness: 340 & 265 mm | Number of t-slots: 9 | T-slot size: 40/21 mm | Machine dimensions (l×w×h): 1,000 x 1,000 x 340 / 265 mm

Assorts - 4 Inches (100 mm) Rotary Table

• Manufacturer: Assorts

Can be mounted both in horizontal & vertical position. Designed for smaller milling machines. Table is graduated 360 degrees. Table diameter 100mm 4 slots.