Used Materials Testing in Germany

+GF+ - GEORG FISCHER SPCR
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
Adjustment body stair step: 9 steps; 2 - 10 mm; 20 x 20 mm
- Manufacturer: Unknown
Adjusting block step 2 - 10 mm ; Width: 20 mmIncrements: 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 (in mm); Material: S355 RG J0 Test body for measurement by coating
Münster, Germany
BNIF plates
Product information "BNIF plates" Comparison plates for testing surface roughness in accordance with EN 1370 The 25 plates, each measuring 110 x 160 mm, are supplied in a case
$1,467 USD
Münster, Germany
Trusted Seller
Auction
TBT - ML 300-4-1450 - Deep Hole Drilling Machine
- Manufacturer: TBT
- Model: ML
Technical data according to data sheet: Drilling method: Lip drilling (ELB) Number of Spindles: 4 Spindle spacing: 120mm Center height above floor: 1,150 mm Drill carriage stroke: 1,450 mm Drilling depth approx.:...
Bad Emstal, Germany
Visit Auction Website
Scrata plates - 48 pieces -
Product information "Scrata plates - 48 pieces -" Comparison plates for testing surface quality in accordance with DIN EN 1370 The set is composed as follows:- Surface roughness (1-5) - Surface inclusions (1-5) -...
$4,571 USD
Münster, Germany
Trusted Seller
Sotax AT 7
- Manufacturer: Sotax
Sotax Dissolution Tester AT 7 Smart. With: Hub piston pump CY 7-50. Fraction collector C 613. 2 valve banks. 7 stirring stations. Glass gasket. 230 V. 50 Hz. 1195 W. manufacturer: Sotax model: AT 7 annotation: Do...
$6,924 USD
Get financing
Est. $136/mo
Burladingen, Germany
Spectroline BIB 150 P / F
- Manufacturer: SpectroLine
Product information "Spectroline BIB 150 P/F" Spectroline BIB 150 P/F UV hand lamp ( build in ballast ) without ballast with belt switch ( clip ), 230 Volt / 50 Hz, weight: 1.8 kg
$586 USD
Münster, Germany
portable hardness tester novotest T-UD3
Product information "portable hardness tester novotest T-UD3" portable hardness tester novotest T-UD3 with one probe (either UCI or Leeb) 1kgf (9.8N),, 5kgf (49N), 10kgf (98N) Leeb probe types D, DC, DL, C, D+15,...
$3,404 USD
Münster, Germany
Slip cross magnet 42 volts
Product information "Helling cross magnet 42 Volt" Helling cross magnet on rollers completely overhauled // - newly potted - ideal testing device for simultaneous longitudinal and transverse fault testing! requir...
$1,168 USD
Münster, Germany
+GF+ - GEORG FISCHER SPE
- Manufacturer: Georg Fischer
- Model: SPRA
Test specimen cylinder bushing, ram base, ejector, reading scale
Meinerzhagen, Germany
Adjustment body stair step: 4 steps; 10 - 40 mm; 25 x 30 mm
- Manufacturer: Unknown
Adjusting body step 10 - 40 mm; Step size: 25 mm x 30 mm Steps: 10 / 20 / 30 / 40 (in mm); Material: X20
Münster, Germany
Adjustment body stair step: 6 steps; 3 - 25 mm; 20 x 20 mm
- Manufacturer: Unknown
Adjusting body step 3 - 25 mm ; Step size: 20 mm x 20 mm Steps: 3 / 5 / 10 / 15 / 20 / 25 ( in mm ); Material: aluminum
Münster, Germany
Adjustment body stair step: 8 steps; 1 - 10 mm; Width: 20mm
- Manufacturer: Unknown
Adjustment body stair step 1 - 10 mm; Step size: 20 mm x 20 mm with certificate in aluminum box steps: 1/2/3/4/5/6/8/10 (in mm); Material: 1.1147
Münster, Germany
BPK 6-AL- 50-25-10 mm
- Manufacturer: Unknown
Image quality test specimen according to EN 462-1; 6 AL in the lengths: 10mm / 25 mm / 50 mm
Münster, Germany
BPK 10-FE- 50-25-10 mm
- Manufacturer: Unknown
Image quality test specimen according to EN 462-1; 10 FE in the lengths: 10mm / 25 mm / 50 mm
Münster, Germany