New Machine Tools in Friuli Venezia Giulia, Italy

CAMAM AVB - CE PIN AND SOCKET DRIVER

• Manufacturer: Camam

CAMAM AVB - CE PIN AND SOCKET DRIVER, motor power 1.1 kW, spindle speed 750 RPM

New Unused 2024 Natural Gas Fired Auxiliary Boiler pre assembled in a base frame

Fuel Gas Pressure Reducing Station PRS, installed upstream the skid to reduce gas pressure from inlet pressure of 0.5 to 1.5 Bar (g) to 0.3 Bar (g). • Once-through type steam generator with single fuel burner, fe...

DOUBLE KNURLING MACHINE FOR SPRINGS AND TENONS CAMAM MOD. ZGD - CE

• Manufacturer: Camam

DOUBLE KNURLING MACHINE FOR SPRINGS AND TENONS CAMAM MOD. ZGD - CE

STARTECH CN K COMPACT MACHINING CENTER

COMPACT MACHINING CENTER STARTECH CN K 109952 Execution in accordance with CE standards R00737 startech cn k - CE version 930771 Voltage 230 EU 931205 Frequency 50 hz 580760 Machine support base with wheels and a...

CAMAM FRO 500 HORIZONTAL AXIS MILLING MACHINE - CE

• Manufacturer: Camam

CAMAM FRO 500 - CE HORIZONTAL AXIS MILLING MACHINE with a double-support milling unit

DCC-220 RAPID CUTTING AND CHAMFERING/GRINDING MACHINE FOR DOWELS

FAST CUTTING AND CHAMFERING/GRINDING MACHINE FOR DOWELS MOD. DCC-220 Features: possibility of working diameters from 6 to 18 mm minimum cutting length: 30 mm maximum cutting length: 150 mm production: approx. 750...

COPYING LATHE DINCMAK MOD. EKS.T4.Z

VERTICAL COPYING LATHE WITH SANDING UNITS MOD. EKS.T4.Z working length mm. 1200 workable diam. 150 or 100x100 mm section. 4 roller spindles for sanding unit h. 120 mm. 2x1.5 kw sanding motors 1500 rpm. turning to...

MJ1300 3 MULTI-BLADE PANEL SAW – WITH 8 LASERS INCLUDED – CE

MULTI-BLADE PANEL SAW MJ1300*3 – CE Blade diam. 205 mm. Main motor 15 kw Feed speed 1-12 m/min, feed motor 1.5 Kw Main spindle diam. 80 mm., rotation speed 2600 rpm Workable thicknesses 4-25 mm. Effective distanc...

AUTOMATIC HORIZONTAL BAND SAW FOR CUTTING SLATS SAWYER MOD. TS 650 CE 40+3+2HP THREE-PHASE

AUTOMATIC HORIZONTAL BAND SAW FOR CUTTING LAMELLAS SAWYER MOD. TS 650 CE 40+3+2HP THREE-PHASE Max. cutting capacity 650x200 mm Blade-belt distance 2-150 mm Min. cutting thickness 2 mm Flywheel diam. 915 mm. Blade...

AUTOMATIC HORIZONTAL BAND SAW FOR CUTTING SLATS MOD. TS400

AUTOMATIC HORIZONTAL BAND SAW FOR CUTTING LAMELLAS MOD. TS400 Double speed device: thanks to a reading sensor the machine starts cutting at a reduced speed to accelerate after the blade enters the plank, this lea...

CENTAURO BAND SAW MOD. CO 900 - THREE-PHASE - HP 7.5 - CE

• Manufacturer: Centauro

CENTAURO BAND SAW MOD. CO 900 - THREE-PHASE - HP 7.5 - CE disc flywheels microswitches on the doors v.400/50

CENTAURO SMART 800 BAND SAW - TRF - HP 5.5 - CE

• Manufacturer: Centauro

CENTAURO BAND SAW Mod. SMART 800 – CE * Steel base * 4 kW motor (5.5 HP) * Self-braking motor * Precision upper blade guide * Emergency button on the control panel * 15 mm grooved table * Ground table * Friction ...

BENDING PRESS MOD. PPCE/120 - CE

BENDING PRESS MOD. PPCE/120 - CE dimensions mm. 2000x1100 6 pistons diam. 85 opening 1000 mm. lower moving platen ton 120 specific pressure 5.4 Kg/cm2 standard control panel electrical panel with double button an...

BENDING PRESS MOD. PPCE/100 - MM. 2000X1100 - CE

BENDING PRESS MOD. PPCE/100 - CE dimensions mm. 2000x1100 6 pistons diam. 85 opening 1000 mm. lower moving platen 100 ton specific pressure 5 Kg/cm2 standard control panel electrical panel with double button and ...