New Machine Tools in California, USA

2020 CNC SUPRA BPS-1649 VERTICAL MILL, COMPUTER, TOOLING & CABINET

• Manufacturer: Supra

EXCELLENT, ONLY USED FOR SHORT TIME IN A START UP BIOTECH COMPANY

17" PALMGREN 16-SPEED FLOOR NEW

• Manufacturer: Palmgren

Palmgren's heavy duty 16-speed drill presses are designed and built for drilling a wide array of materials. They have the weight and rigidity to maintain the built-in tight tolerances required for metalworking ap...

CHEEKBENDER RAMS US MADE 24" X 20 GA

• Manufacturer: Rams

bend. It features Torrington Needle Bearings as well as a Roller Guide along the length of the entire piece. FEATURES: * Torrington Needle Bearings * Two Handle Positions Available * Roller Guided End Plate OPTIO...

20" JET FLOOR- JET#354402

Range of Spindle Speeds (RPM): 150, 260, 300, 440, 490, 540, 1150, 1550, 1840, 2220, 2950, 4200 The JET J-2550 Drill Press features 12 spindle speeds from 150 to 4200 RPM, a head casting with a permanently lubric...

2024 RHINO PD200S

• Manufacturer: Rhino

Rhino Pile Driver Kit, Rent to own or purchase; call for pricing. Shipping available. Kit includes: Carrier w/Filter-Regulator-Lubricator (FRL) Installed 2. PD-200 Post Driver with 7” Master Chuck 3. Throttle V...

JET SHRINKER STRETCHER ON FLOOR STAND 16 GAUGE JET SK#756018

The JET Shrinker Stretcher readily forms compound curves in sheet metal for car, motorcycle, and airplane body restoration. The quick and easy foot pedal operation frees the user's hands to manipulate the panel f...

20 Ga. x 14' VAN-MARK max 20 GA / recommended 24 GA.

BENDING CAPACITIES: FEATURES: * Heavy-duty extruded aluminum shop stand included with every Mark IV. The Xtreme Shop Stand will not rock, rattle, roll or rust. Unit is fully detachable and collapsible for easy fa...

20 Ga. x 10' VAN-MARK max 20 GA / recommended 24 GA.

BENDING CAPACITIES: Capacities are based on standard metal properties. FEATURES: * Heavy-duty extruded aluminum shop stand included with every Mark IV. The * Xtreme Shop Stand will not rock, rattle, roll or rust....

3' x 22 GA. JET SLIP ROLLS STK#756026

JET manual slip rolls have a forming width of 24", 36" & 50" with a capacity of 20, 22 & 16 gauge mild steel. These machines have two driven rolls of precision turned, ground and polished carbon steel. They are t...

17" PALMGREN 16-SPEED FLOOR NEW

• Manufacturer: Palmgren

Palmgren's heavy duty 16-speed drill presses are designed and built for drilling a wide array of materials. They have the weight and rigidity to maintain the built-in tight tolerances required for metalworking ap...

20" PALMGREN 16-SPEED FLOOR NEW

• Manufacturer: Palmgren

Palmgren's heavy duty 16-speed drill presses are designed and built for drilling a wide array of materials. They have the weight and rigidity to maintain the built-in tight tolerances required for metalworking ap...

5' X 10 GA.(5/32") SAHINLER INITIAL PINCH ROLLS

• Manufacturer: Sahinler
• Model: IRM 1550 X 140

FEATURES: - MOVABLE FOOT CONTROL ON TRAILING LEAD - EMERGENCY STOP BUTTON ON THE CONTROL - LOW VOLTAGE AT THE CONTROLS - CONE BENDING ATTACHMENT - TILTABLE REAR ROLL - GROOVES IN ROLLS 3/8", 1/2" AND 5/8" ROUND B...

5' X 10' WYSONG 2kW FIBER LASER

• Manufacturer: Wysong

Laser Power 2 Kw Type Fly Optic Maximum Sheet Size 5x10' (1500mm. x 3000 mm) Maximum Cutting Thickness Steel 0.63" (16 mm) Maximum Cutting Thickness Stainless steel 0.39" (10 mm) Maximum Cutting Thickness A...

36" x 14-16 GA. ROPER WHITNEY SLIP ROLLS

• Manufacturer: Roper Whitney
• Model: 416

FEATURES: The 3-Inch hand rolls are furnished with all three rolls driven. Rear roll has three full length longitudinal reduction. Two handles supplied for heavy capacity forming. Pexto Slip rolls are engineered ...