Used dcs

Extruders 80466
- used
- Water cooled, 7 Zone vented & plugged barrel - Approx. 100-150 HP DC Motor - Belt driven 15.12:1 Gearbox with a 1.25 service factor and a max. 150 HP motor rating - Beringer Hydraulic Screen Changer-no power pa...
Troy, MI
1987 Extruders 80465
- used
- 7 Zone Electrically heated, water cooled (closed loop) and side vented barrel - 52" Centerline height - Gearbox ratio; 5.67:1 rated at 158 HP at a service factor of 1.25. - Gearbox belt driven by a 200 HP, 500...
Troy, MI
1992 Battenfeld Uni-Ex-1-90-30B
- used
- Manufacturer: Battenfeld
- Model: Uni-Ex
Single Screw Extruder Inlet zone: grooved bush | Screw diameter: 90 mm | Screw length: 30 x D mm | Screw speed: max. 164 1/min. | Screw torque: 2 x 1580 Nm | Drive motor: DC-motor, 165 kW | Extruder control: Batt...
Bocholt, Germany
1995 Blake 303-1600-180
- used
- Manufacturer: Blake
Caterpillar haul-off New speed control incl. 10 m cable installed in 2025
$11,149 USD
Get financing
Est. $219/mo
Bocholt, Germany
1994 Reifenhäuser BT-1000-2-63 K
- used
- Manufacturer: Reifenhäuser
Twin Screw Extruder Temperature control: : digital controllers (2 x PSHG Multpact 88)
$21,007 USD
Get financing
Est. $395/mo
Bocholt, Germany
1977 KUHNE K 70-20D
- used
- Manufacturer: Kuhne
Use area: Screw ø 72-20D, approx. 40 kg/h | Order: D.C. motor
Neuenburg am Rhein, Germany
1995 BATTENFELD BEX 2-90-22V/3
- used
- Manufacturer: Battenfeld
30906 operation hours Use area: Screws ø 90-22D, approx. 400 kg/h | Order: D.C. motor
Neuenburg am Rhein, Germany
1995 IND. GENERALI 80-30D
- used
- Manufacturer: IND. GENERALI
Incl. Integrated Co-Extruder Use area: Screw ø 80-30D, approx. 350 kg/h | Order: D.C. motor 116 kW
Neuenburg am Rhein, Germany
1997 BANDERA 75-33D
- used
- Manufacturer: Luigi Bandera
Brand New Screw, Fully Refurbished Extruder, New Electrics, Excellent Condition
Neuenburg am Rhein, Germany
1987 REIFENHÄUSER RH 551-1-70-25
- used
- Manufacturer: Reifenhäuser
New Electrics, new touch panel Use area: Screw ø 70-25D, approx. 100 kg/h | Order: 45.5 kW D.C. motor
Neuenburg am Rhein, Germany
1987 BANDERA 65-30D
- used
- Manufacturer: Luigi Bandera
New screw, new controller Use area: Screw ø 65-30D, approx. 200 kg/h | Order: D.C. motor 81.9 kW
Neuenburg am Rhein, Germany
Granulating line
- used
- Manufacturer: Plast Machines, BKG Nordson, Resotec
No. 2587k 1 used pelletizing line, function tested, throughput up to approx. 500 kg/h depending on material, consisting of: 1 volumetric feeder extruder Plastmachines type PME 100 single screw Ø 100 mm - 35 L/D d...
Wuppertal, Germany
Compounding line
- used
- Manufacturer: Theysohn- BKG Nordson
No. 2590k 1 used compounding-pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x grav. Dosing unit 5-components SITECOM incl. control system 1x extruder twin screw THEYSOHN type ...
Wuppertal, Germany
2008 Compounding Extruder
- used
- Manufacturer: Alphatec
Stock No. 2572 Twin screw extruder type AD-S 75.36 , year 2008, throughput up to 500 kg/h depending on material, consisting of: Extruder AD-S 75 co-rotating screws 2 x Ø 73 mm - 36 L/D drive 110 kW - DC screw spe...
Wuppertal, Germany
2023 ZE60A compounding extruder - 40 L/D
- used
- Manufacturer: Berstorff - Krauss Maffei
Stock- No. 2680 1x partly overhauled and functionally tested compounding extruder twin screw, synchronized segmental screw and barrel ( water cooled **) screws 2x 64 mm - 40 L/D with screw speed up to 1200 rpm-1 ...
Wuppertal, Germany