New Dryers

Dryer-Thermal Disc Bepex TD48-9 - IPP# 225385

• Manufacturer: Bepex

Bepex Torus Disc Cooler U shaped trough, continuous design. Certified by Moorhead Machinery & Boiler Co Moorhead Serial number 605-2300. Shell rated 15 psi @ 350 degrees. No jacket on trough. U shaped trough, bol...

Dryer-Drum 914.4 mm (36 in) Carbon Steel - IPP# 79738

drum for dryer Blt for working pressure of 10 bars

Dryer-Drum 762 mm (30 in) Stainless Steel 316 - IPP# 71315

single drum dryer Drum driven by 12 KW motor and reducer Cored drum Packing gland on shaft Outboard bearings Dual knife discharge, manual knife adjustment into 8" dia screw conveyor

Stainless Steel 304 Dryer-Twin Shell & Double Cone - IPP# 210238

doors for a PK dryer. 21" diameter by 1/8" thick, 2 have clamps. Each door has a five inch opening and a 1.25" sanitary connection. Three doors are available.

Stainless Steel 316 Stalwart international 1 Dryer-Shelf - IPP# 216275

• Manufacturer: International

vacuum tray dryer with mirror polish finish internal, rated for GMP use. Sanitary construction. Complete with vacuum condenser and condensate pot. Can be ASME stamped. With 3 heating plates(dummy on top) heating ...

Dryer-Thermal Disc 1,219 mm (48 in) Carbon Steel - IPP# 225384

• Manufacturer: Bepex

Bepex Torus Disc Cooler U shaped trough, continuous design. Certified by Moorhead Machinery & Boiler Co Moorhead Serial number 605-2299. Working pressure in the hollow rotor is 100 PSI @ + 50 to 350 degrees F She...

Dryer-Thermal Disc 1,753 mm (69 in) Carbon Steel - IPP# 96831

• Manufacturer: Bepex

Torus disc dryer The rotor is 60" diameter x 14' long, and is hard faced. The rotor is cored for steam heating Heating medium is steam Trough is 69" wide x 177" long x 84" high with a vapor dome. Total height wit...

Dryer-Thermal Disc 1,219 mm (48 in) Carbon Steel - IPP# 96719

• Manufacturer: Bepex

Torus disc cooler

Dryer-Thermal Disc 1,219 mm (48 in) Carbon Steel - IPP# 96720

• Manufacturer: Bepex

Torus disc cooler Vessel rated 15 psig/full vacuum @ 385 degree F Outboard bearings Johnson rotary joints on shaft Max speed 15 rpm

Carbon Steel Bepex CRUJ-400 Dryer- Ribbon & Paddle - IPP# 96809

• Manufacturer: Bepex

Continuator, Trough inside dimensions 69" diameter x 195" long, 214 Square foot heating surface. with a dome top cover, 159.5 overall all height. 25% of the dome cover has panel coils. The rotor is 18" diameter w...

Stainless Steel 316L GEA MP 4 Dryer-Fluid Bed - IPP# 233968

• Manufacturer: GEA

Note: Drawings show Mills, we did not get some of them. Suitable for installation in Hazardous areas. Typical working volume is 30-225 liters based on the allowable product density of 1500 kg/m This fluid bed dry...

Stainless Steel 316 Sangerhausen 6-62 Dryer-Rotary Vacuum - IPP# 75432

• Manufacturer: Sangerhausen

20 torr @ 80-100 degrees C Chamber size 1'10" diameter x 2' straight side Chamber designed to rotate with piston type vacuum pump

Porcupine Dryer 1P3018UTC Gale Process Solutions - IPP# 85676

Single agitator design. Trough is not jacketed Agitator is hardfaced and rated 150 psig @ 650 degree F vessel rated atmospheric @ 650 degree F Trough contains approximately 62 cu. ft. of processing space Complete...