New Drilling Rigs

Trusted Seller
Bauer Werkstattcontainer / Workshop container
- Manufacturer: Bauer
- ela Container shipping container 20 ft - maximum load: 15.000 kg, - length: 6,000 mm, - width: 2,450 mm, - height: 2,900 mm, - fixing point on the floor - fixing point under the roof - tool cabinets - mobile wo...
Bavaria, Germany
Trusted Seller
Project Testina adduzione sotto-testa
- Manufacturer: Testa
Brand new adduction head to be installed under existing rotary head Inner passage 50 mm Shaft with male or female thread on request Connecting flange can be adapted on request For any kind of drilling rig wit...
Fidenza, Italy
Trusted Seller
Sandvik 1.75" Coolant Thru Indexable Drill 1.5" Shank A880-D1750LX38-04 (LOC3314
- Manufacturer: Sandvik
Mpn: A880-D1750LX38-04 | Material: Steel | Overall length: 11.1629" | Cutting diameter: 1.75" | Shank diameter: 1.5" | Flutes: 2 | Coolant through: Yes | Length of cut: 7.0286" | Insert type: 880-0805W08H-P-GM |...
$700 USD
Lansing, MI
Trusted Seller
Ingersoll 1.5" 5XD Coolant Thru Indexable Drill 1" Shank QR0381191N6R02 (LOC2257
- Manufacturer: Ingersoll Rand
Coolant through: Yes | Mpn: QR0381191N6R02 | Material: Steel | Cutting diameter: 1.5" | Shank diameter: 1" | Flutes: 2 | Length of cut: 7.5" | Warehouse location: LOC2257 | Edp: 6485987
$630 USD
Lansing, MI
Trusted Seller
Project PJ20_1500
- Manufacturer: Project
N ° 1 drilling rig on truck model PJ 20_1500 on 3-axis 6x6 truck 6x6 three-axle truck. power 380-420 hp, total mass 33 tons 6-cylinder turbo auxiliary engine, power 290-430 hp Usable stroke for 6 m long rods ...
Fidenza, Italy
Trusted Seller
Sandvik 25-25.9mm Coolant Thru Drill 1.25" Shank 870-2500-25LX125-10 (LOC2240)
- Manufacturer: Sandvik
“Missing Original Packaging” Coolant through: Yes | Mpn: 870-2500-25LX125-10 | Material: Steel | Overall length: 353mm | Cutting diameter: 25-25.9mm | Shank diameter: 1.25" | Flutes: 2 | Length of cut: 10.387" | ...
$850 USD
Lansing, MI
Trusted Seller
2025 Bauer Mischwerkzeug / Mixing tool SCM
- Manufacturer: Bauer
-Mixing diameter 2.000 -Mixing depth max. 24.5 m (up to 40 mtr. with lattice mast extension)
Bavaria, Germany
Trusted Seller
Project PJ13-1500
- Manufacturer: Project
1 Project brand drilling rig, model PJ 13-1400 mounted on a 2-axle 4x4 truck 205 hp, water-cooled auxiliary engine 4 stabilizers to level the drilling rig in working conditions Counter slide to adjust the vert...
Fidenza, Italy
Trusted Seller
Project Morsa 320 mm
- Manufacturer: Project
Brand new double clamp with passage 320 mm heavy duty type Complete with unscrewing hydraulic jack it can be installed on any type of drilling rig
Fidenza, Italy
Trusted Seller
2019 Leffer Automatik Drehteller/Casing drive adapter 1200
- Manufacturer: Leffer
- Leffer automatic casing drive adapter-1200-CDA-A/E - Casing diameter 1200
Bavaria, Germany
Trusted Seller
SOILMEC
- Manufacturer: Soilmec
N ° 1 brand new double vice, passage 330 mm - actual passage 323 mm Fixed lower vice Swivel upper vice The two clamps are independent The upper vice is designed to be installed on sliding guides to function a...
Fidenza, Italy
Trusted Seller
2022 Project PJ20_1500
- Manufacturer: PJ20_1500
1 Project brand drilling rig, model PJ20 installed on a towable trailer Doosan 205 hp water-cooled engine mast on stroke for rods of length 3000 mm; effective stroke 3800 mm Max pull 20 tons Rotation head wit...
Fidenza, Italy
Trusted Seller
Project Rotary 2000 kgm
- Manufacturer: Project
N ° 1 brand new rotary head Max torque variable from 2000 to 3200 kgm depending on the motors installed Speed from 10 to 100 rpm - with 150 lt / 1 'of oil 2000 kgm @ 50 rpm 1000 kgm @ 100 rpm - with 300 lt ...
Fidenza, Italy
Trusted Seller
Project Morsa 250 mm
- Manufacturer: Project
Brand new double clamp with passage 250 mm (effective passage 260 mm) Complete with unscrewing hydraulic jack Pads' lenght 105 mm Ready to be installed
Fidenza, Italy
Trusted Seller
Project PJ20_700
- Manufacturer: Project
Brand new rotary head with 2 hydraulic motors max torque 720 kgm in 1st gear; 360 kgm in 2nd gear 2 speeds: 1st gear 0-60 rpm 2nd gear 0-120 rpm Pulling capacity: 20 tons Floating shaft with inner passage 40 m...
Fidenza, Italy