Used machine tools in Chihuahua, Mexico

PART: AMX-10078 - BAND SAW SHARPENER AND SHARPENER FOR BAND SAWS - TIMBERY SHARP-N-SET

• Manufacturer: Sharp

PART: AMX-10078 - TIMBERY SHARP-N-SET - BAND SAW SHARPENER & N-SET - TIMBERY SHARP-N-SET LIKE NEW - UNUSED FOR BAND SAWS FROM 1" TO 1-1/2" WITH 7/8" TOOTH SPACING VOLTAGE 115/230 VAC PHASE 1 DIAGRAM # 5520-989 OW...

MULTI BANDSAW - 75 HP ENGINE - 24" WIDTH CAPACITY - NEWMAN

• Manufacturer: Newman

PART: 12278 - MULTIPLE SAW - 75 HP ENGINE - 24" WIDTH CAPACITY - NEWMAN USED - GOOD CONDITION VARIABLE SPEED EXTRA SAW SLEEVE

PART: AMX-10079 - 45 DEGREE DOUBLE SAW - 2 X 10" DIAMETER SAWS - CTD D-45

PART: AMX-10079 - DOUBLE SAW 45 DEGREES - 2 SAWS 10" DIAMETER - CTD D-45 USED - VERY GOOD CONDITION 2 small pistons on the sides that are activated before the saws go up and down, so that the material to be cut d...

PART: AMX RADIAL SAW - INDUSTRIAL - HEAVY DUTY - MOTOR 5 HP - 220V, 3 PHASE - DEWALT 3526

• Manufacturer: DeWalt

PARTE: AMX-10168 - SIERRA RADIAL - INDUSTRIAL - USO RUDO - MOTOR 5 HP - 220V, 3 FASES - DEWALT 3526 MAQUINA PARA USO RUDO INDUSTRIAL USADA - MUY BUENAS CONDICIONES CAMBIO COMPLETO DE BALEROS - 2 BALEROS MOTOR NUE...

14" BAND SAW

PART # SIL-DC-SW1402 - 14" BAND SAW - 3/4 HP MOTOR NEW WITH WARRANTY MOTOR: 3/4 HP, 110/220V, 60 Hz, 1 PHASE DISTANCE FROM BAND TO COLUMN: 345 MM TABLE INCLINATION: 0 - 45 DEGREES BAND SAW BLADE LENGTH: 2350 MM B...

BAND SAW CENTAURO 31".

• Manufacturer: Centauro

PART # 1RU-CE-R800-3 - CENTAUR BAND SAW 800MM Diameter of flywheels 800 mm Table inclination 15 degrees Motor power 15 H.P. 3 phases Approximate net weight 700 Kgs. Maximum height of the guide 400 mm. Distance be...

10" BAND SAW

PART # SIL-DC-SC10-B - 10" BAND SAW - 1/2 HP MOTOR NEW WITH WARRANTY BAND TO COLUMN DISTANCE: 230 MM TABLE INCLINATION: 0 - 45 DEGREES LENGTH OF BAND SAW: 1511 MM

14" BAND SAW

PART # SIL-DC-MJ343B - 14" BAND SAW - 1 HP MOTOR NEW WITH WARRANTY MOTOR: 1 HP, 110/220V, 60 Hz, 1 PHASE DISTANCE FROM BAND TO COLUMN: 335 MM 2 SPEEDS (12 AND 14 MTS/SEC) TABLE INCLINATION: 0 - 45 DEGREES BAND SA...

18" BAND SAW

PART # SIL-DC-BS0018 - 18" BAND SAW - 3 HP MOTOR NEW WITH WARRANTY BAND SAW WIDTH: FROM 3/8" TO 1-1/2". BAND SPEED: 9 AND 14 MTS/SEC TABLE INCLINATION: 10 - 45 DEGREES

CLAMPING PRESS

PART # SIL-DC-CLD - SLIDING TABLE CLAMP FOR SLIDING TABLE SAW 45 DEGREE, 0 DEGREE AND -45 DEGREE CUTS ACCESSORY FOR SAWS DC-MBS250 AND DC-MBS300

SHAPER WITH FEEDER - 7.5 HP ENGINE - LARICK 390

• Manufacturer: Larick

PART: 12327-E - SHAPER WITH FEEDER - ENGINE 7.5 HP - LARICK 390 USED - EXCELLENT CONDITIONS 230/460V, 3 PHASE

4 SIDED BRUSH - CAPACITY 17.5" WIDE

PART: 12332 - 4 SIDED PLANER - CAPACITY 17.5" WIDE USED - VERY GOOD CONDITION Capacity 450 mm x 200 mm 4 tool holders Top height 200 mm High and low planer 10 - 10 HP Vertical planer 7.5 - 7.5 HP Machine dimensio...

EA -TS300K - CHISEL - TRAVEL 300 MM - TABLE 560 MM - 5 HP

PART: 3EA -TS300K - CHISEL - STROKE 300 MM - TABLE 560 MM - 5 HP New with warranty Features (Low: 22,26, 31, 39spm ; High :44,52,61,78 spm) - Inner hole dia. of table : Dia. 75mm Standard Accessories 1. Lubricati...

WIDE BELT SANDER - 3 SANDPAPER - 52" WIDE - SHORE

WIDE BELT SANDER - 3 SANDPAPER - 52" WIDE - COAST USED - VERY GOOD CONDITION Sanding machine brand COSTA model ACCC3 1350 Sanding tool 1350mm Motorized up and down Digital table height indication Electronic varia...

BRUSH 1 SIDE - 250 MM WIDE - 3 HP - MARUNAKA

• Manufacturer: Marunaka

PART: 3MA-SUPERMECA-S - BRUSH 1 SIDE - 250 MM WIDE - 3 HP - MARUNAKA NEW WITH WARRANTY Able to operate by auto return feeding Max Work width x Height : 250 mm (40º) 165 mm (60º) Knife bias angle: 0 - 60 degree (v...