New in Chihuahua, Mexico

1 SIDE TENONING MACHINE - FINGER JOINT

PART: 2TA-SET-60 - 1 SIDE TENONING MACHINE - FINGER JOINT Features: It performs cut off, burrs trimming, and moulding functions. Two 4" D x 5" L max. tenon cutters, cope spindle accepts general shaper cutter. Sui...

BENCH GLUING MACHINE

PART # 2CK-F-TTGA-12 - 12" WIDE BENCH TOP GLUER - 6" DIAMETER, 12" WIDE SLOTTED PLASTIC DRUM - DESIGNED FOR USE WITH WHITE AND YELLOW WATER BASED GLUES - IDEAL FOR USE WITH 6 SECTION GLUERS - HAS METAL STRIP FOR ...

GLUING MACHINE WITH CONVEYOR

PART # 2CK-F-CGAP-12-05-05 - GUMMING MACHINE WITH MOTORIZED CONVEYOR - RUBBER ROLLER WITH STAINLESS STEEL TANK - 2 NUTS FOR ADJUSTING THE AMOUNT OF GLUE TO BE APPLIED - STOP AUTOMATICALLY STOPS THE MACHINE SO THA...

36" - 72" GLUING MACHINE

PART # 2CK-F-QSGA-08-36 - 36" WIDE GLUER - IDEAL FOR 6 TO 14 SECTION GLUERS - EASY OPERATION - FOR WHITE AND YELLOW WATER BASED GLUES - WHEN THE FOOT PEDAL IS DEPRESSED, IT LIFTS THE GLUE SHEET WITH THE GLUE AND ...

VX-VI-AG98F - MANUAL EDGEBANDER - PRE-GLUED UP TO 2 MM THICKNESS - VIRUTEX

PART: 1VX-VI-AG98F - MANUAL EDGE BANDING MACHINE - PRE-GLUED UP TO 2 MM THICKNESS - VIRUTEX Manual Edge Banding Machine for Pre-Glued Veneers or Tapes New with warranty For edgebanding pre-glued P.V.C., polyester...

PLUGGER

• Manufacturer: amxmachinery.com

PART # 12C-H90 - VENEERER - HORIZONTAL - H90 STRAIGHT EDGE BANDING MACHINE OPERATING TEMPERATURE: 100-250ºC (VARIABLE) TEMPERATURE CONTROL: ANALOG PYROMETER VENEER TO BE USED: PVC, MELAMINIC, FORMAICA, WOOD, PAPER

PORTABLE EDGE BANDING MACHINE - WITH BOILER - STRAIGHT AND CURVED

PART: 2MK-FLEX - PORTABLE EDGE BANDING MACHINE PORTABLE EDGEBANDING MACHINE - WITH BOILER - STRAIGHT AND CURVED NEW WITH WARRANTY Glue: Granulated Hot-Melt Low Temperature Volts/Amps: 127 V - 5,5 A or 220 V - 2,5...

PORTABLE EDGE BANDING MACHINE - WITH BOILER - STRAIGHT EDGES

PART: 2MK-CBC.E - PORTABLE EDGEBANDING MACHINE - WITH BOILER - STRAIGHT FOR PVC, ABS, PAPER AND VENEER STRIPS FOR STRAIGHT PIECES MANUAL CUTTER DIGITAL TEMPERATURE CONTROL SHIPPING MEASUREMENTS: 82 cm length x 54...

SA-CA-100 - MANUAL BENCH VENEERER - STRAIGHT AND CURVED

PART: 1SA-CA-100 - MANUAL BENCH EDGE BANDING MACHINE - STRAIGHT AND CURVED STRAIGHT AND CURVED EDGES TAPE THICKNESS: FROM .48 MM UP TO 1 MM ONLY USE PRE-GLUED TAPE, NOT FOR PVC TAPE CAN BE PAPER, MELAMINE AND SOL...

PORTABLE EDGE BANDING MACHINE - FOR PORTABLE EDGE BANDERS

PART: 2MK-RBB.1000 - PORTABLE EDGEBANDER - FOR PORTABLE EDGEBANDER. SHIPPING MEASUREMENTS: 100 cm length x 20 cm width x 25 cm height, Weight 20 kg

REFILER

• Manufacturer: amxmachinery.com

PART # 12C-R12 - REGRIND MACHINE 3 to 5 mm regrind capacity 1 hp 220 volt regrinder motor Straight and curved trimmer cutter adjustment 1 side cutting

REFILER

PART # 12C-R1 - REGRINDER PORTER OR MAKITA MOTOR CABLE WITH ATTACHMENT (DRILL BIT, HOLDER, BRAKE AND CORNER BIT)

VACUUM TABLE

• Manufacturer: amxmachinery.com

PART # 12C-001 - VACUUM TABLE USED FOR EASY TRIMMING OF EDGE-VENEERED PARTS VACUUM CLAMPING 2 CLAMPS: 12 CM DIAMETER EACH NO USE OF COMPRESSED AIR NO VACUUM PUMP

CURVED VENEER MACHINE

PART # 12C-EB-2 - CURVED AND STRAIGHT EDGE BANDING MACHINE VARIABLE SPEED: 0-8 METERS/MINUTE OPERATING TEMPERATURE: 100ºC TO 230ºC RUBBER ROLLER PROTECTION ALUMINIUM TABLE HOT-MEAL ADHESIVE APPROXIMATE WEIGHT 250...

CURVED VENEER MACHINE

PART # 12C-EB-1 - CURVED EDGE BANDING MACHINE WORKING SPEED: 4 METERS X MINUTE OPERATING TEMPERATURE: 150-230ºC EMERGENCY STOP 2 TEMPERATURE CONTROL ZONES ANALOG PYROMETERS THERMOSTAT START CONTROL