New in Chihuahua, Mexico

OVER ARM ROUTER

PART # 2EV-2480 - OVER ARM ROUTER - EVANS 2480 - 220 Volt, 3 Phase, 10 amp - Standard Features: - 3 HP High frequency router motor - 80 PSI Required - 18,000 RPM - Working height 33" - Includes router bit Part # ...

CLEANER PANEL

PART # 2EV-4700 - PANEL CLEANER - EVANS 4700 Powered In-Feed and Out-Feed Four 4" Dust Ports Two 10" Nylon Brushes Material Thickness Indicator Emergency Stop Buttons & Safety Gate Electrical: 230/460 V, 3 PH, 60...

AUTOMATIC RADIAL SAW

PART: 2EV-0710 - RADIAL SAW - AUTO - EVANS 0710 Power feed with variable speed control 35 1/2 " working height. Adjustable leveling feet. NEW: Additional guarding on both sides of the blade and around the control...

MANUAL RADIAL SAW

PART # 2EV-0700 - RADIAL SAW - MANUAL - EVANS 0700 Miter Saw, Manual Feed - 220 Volt, 3 Ph, 3 HP - Standard Features: - 16" Saw blade 1" arbor - Set up for 90, 45, and 22 ½ degree cuts - Pneumatically operated Sa...

T-EDGE APPLICATOR

PART # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator - 220 Volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz. - Standard Features: - Hammer ½ hp motor - Pneumatic corner notching - Electric cutoff ½ hp m...

PANEL FEEDER

PART # 2EV-8100 - STANDARD PANEL FEEDER - EVANS 8100 Hydraulic 4 Corner Cable Lift Touch Screen Controls Laser Height Sensor NEMA 12 Enclosure 460 Volt Fused Disconnect 5 HP Hydraulic Power Pack Electrical: 230/4...

CORE BUILDER

PART # 2EV-6600 - CORE BUILDER - EVANS 6600 Machine to make the core or base of kitchen counter tops. The Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine ...

VACUUM TABLE

PART # 2EV-9100 - VACUUM TABLE - EVANS 9100 For Edge Work 13" diameter suction cup with replaceable ring Pneumatic multi-stage hi-flow vacuum pump with debris filter Solid tower and 5/16" thick base Foot pedal fo...

POSTFORMER - 12 FEET LONG 1 SIDE - EVANS 0110

• Manufacturer: Evans

PART: 2EV-0110 - POSTFORMER - 12 FEET LONG 1 SIDE - EVANS 0110 Overhead Radiant Heater and Deflectors Push Button Pneumatic Controls Steel frame with adjustable leveling feet. 35" working height. Dimensions 175" ...

POSTFORMER

PART # 2EV-0138 - POSTFORMER - 8 FOOT LONG 1 SIDE - EVANS 0138 All Form 8' capacity - 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz - 100 PSI air required 1 CFM (2 CFM if using vacuum clamp) - Standard...

POSTFORMER

PART # 2EV-0190 - POSTFORMER - 12 FOOT LONG 1 SIDE - EVANS 0190 To make doubles for Back Splash - 110V, 1 phase, 15 amps - 220V, 1 phase, 8 amps - 12' maximum capacity (3660 mm) - Back Splash Height: Minimum 1" (...

CONTINUOUS POSTFORMER 1 SIDE

PART # 2EV-6000 - CONTINUOUS POSTFORMER 1 SIDE - EVANS 6000 220 Volt 1 phase, 220 volt 3 phase Standard Features: Floating Laminate Trimmer (conventional router) Three phase machines require a separate 110 connec...

EV-6100 - 2 SIDE CONTINUOUS POSTFORMER - EVANS 6100

• Manufacturer: Evans

PART: 2EV-6100 - 2-SIDED CONTINUOUS POSTFORMER - EVANS 6100 220 Volt, 3 Ph., 60 Hz., or 380 Volt, 3 Ph., 50 Hz. 17 kw (no air required) Standard work height 37". Standard Features: 90 and 180 degree setup Quick-c...

RESISTANCE

EVANS MACHINERY REPLACEMENT RESISTORS PART # 2EV-01087 - RESISTORS FOR POSTFORMERS

POLYURETHANE ROLLERS

POLYURETHANE ROLLERS FOR POSTFORMERS EVANS MACHINERY PART # 2EV-10707 - SILICONE ROLLER PART # 2EV-10708 - SHORT ROLLER PART # 2EV-10709 - LONG ROLLER