Test, Lab, Medical equipment » Oxygen Analyzers » Lombardy

Building Filters

19

Used Oxygen Analyzers in Lombardy, Italy

KE-25LF Tecnosens
- Manufacturer: Tecnosens
The KE-LF oxygen sensor series is a series of lead-free galvanic cells developed in Japan by Figaro, a leading gas sensor company. The main features are long life and the absence of CO2 interference. The KE serie...
Brescia, Italy
KE-50 Tecnosens
- Manufacturer: Tecnosens
The KE series of oxygen sensors (KE12, KE25, KE50) is a series of galvanic cells developed in Japan since 1985. Their main features are long life and the absence of CO2 interference. The KE series is ideal for a ...
Brescia, Italy
S+7OX Tecnosens
- Manufacturer: Tecnosens
Range: 0-25% Oxygen Zero Current (Offset): < 0.6 % vol O2 Output Signal: 0.20 �� 0.03 mA Linearity: Linear Response Time, t90: <15 s Maximum Overload: 30% Oxygen Long-term Output Drift: <5% per annum Recommended ...
Brescia, Italy
KE-25 Tecnosens
- Manufacturer: Tecnosens
The KE series of oxygen sensors (KE12, KE25, KE50) is a series of galvanic cells developed in Japan since 1985. Their main features are long life and the absence of CO2 interference. The KE series is ideal for a ...
Brescia, Italy
TEC-OXY-S0-ZZ Tecnosens
- Manufacturer: Tecnosens
Module for measuring oxygen in various ranges between 10ppm and 96% based on a zirconium oxide sensor. This technology allows for precise and accurate measurements while ensuring high stability over time and thus...
Brescia, Italy
5FO Tecnosens
- Manufacturer: Tecnosens
Nominal Range: 0-25% Oxygen Max Overload: 30% Oxygen Expected Operating Life: Two years in Air Output Signal: 0.41 �� 0.05mA in Air T95 Response Time: <20 seconds Temperature Range: -20��C to +45��C Temperature C...
Brescia, Italy
S+4OX Tecnosens
- Manufacturer: Tecnosens
Range: 0-25% Oxygen Zero Current (Offset): < 0.6 % vol O2 Output Signal: 0.10 �� 0.03 mA Linearity: Linear Response Time, T90: <15 s Maximum Overload: 30% Oxygen Long-term Output Drift: <5% per annum Recommended ...
Brescia, Italy
KE-12 Tecnosens
- Manufacturer: Tecnosens
The KE series of oxygen sensors (KE12, KE25, KE50) are galvanic cells developed in Japan since 1985. Their main features are long life and the absence of CO2 interference. The KE series is ideal for a variety of ...
Brescia, Italy
TEC-OXY-S1-ZZ Tecnosens
- Manufacturer: Tecnosens
Module for measuring oxygen in various ranges between 10ppm and 96% based on a zirconium oxide sensor. This technology allows for precise and accurate measurements, ensuring high stability over time and thus requ...
Brescia, Italy
TEC-OXY-D3-ZZ Tecnosens
- Manufacturer: Tecnosens
Oxygen measurement module available in various ranges from 10ppm to 96% based on a zirconium oxide sensor. This technology allows for precise and accurate measurements while ensuring high stability over time and ...
Brescia, Italy
5OxLL Tecnosens
- Manufacturer: Tecnosens
MEASUREMENT Technology: Electrochemical Measurement Range: 0-25% vol. O2 Maximum Overload: 30% vol. O2 Output Signal: 80 - 130 mA in Air T90 Response Time: <15 Seconds T97 Response Time: <35 Seconds Zero Current ...
Brescia, Italy
4OXV Tecnosens
- Manufacturer: Tecnosens
Technology: Electrochemical Measurement Range: 1-25% vol. O2 Maximum Overload: 30% vol. O2 Output Signal: 0.10 �� 0.02 mA in Air Response Time (T90): <15 Seconds Zero Current (Offset): <0.6% vol. O2 Linearity: Ca...
Brescia, Italy
FCX-MWL-F Tecnosens
- Manufacturer: Tecnosens
The board allows you to measure O2 concentration in the range of 0.1-95%. The zirconium oxide technology offers excellent long-term stability, eliminating frequent calibration procedures and ensuring a particular...
Brescia, Italy
7OX-V Tecnosens
- Manufacturer: Tecnosens
Nominal Range: 0-25% Oxygen Maximum Overload: 30% Oxygen Expected Operating Life: Two years in air Output Signal: 0.195 - 0.25 mA in air Temperature Range: -20��C to +50��C Temperature Coefficient: 0.2% signal/��...
Brescia, Italy
2FO Tecnosens
- Manufacturer: Tecnosens
Nominal Range: 0-25% Oxygen Maximum Overload: 30% Oxygen Expected Operating Life: Two years in air Output Signal: 0.41 �� 0.07mA in Air T95 Response Time: <10 seconds (see note) Temperature Range: -20��C to +45��...
Brescia, Italy

12

Overview

Oxygen analyzers are vital instruments used to measure the concentration of oxygen in various environments. They are commonly utilized in medical settings, industrial applications, and environmental monitoring to ensure safe and optimal oxygen levels. These analyzers can be portable or stationary and offer precise readings to prevent hazardous conditions or ensure compliance with safety standards.

FAQ

What should I look for when purchasing an oxygen analyzer?

Consider the accuracy, response time, and range of the analyzer. Evaluate whether you need a portable or stationary model and check for any additional features like data logging or alarms.

How can I ensure safe shipping of an oxygen analyzer?

Use proper packaging materials to protect the analyzer during transit, and choose a reliable shipping provider experienced in handling sensitive equipment. Ensure the device is securely packed to prevent any movement or damage.

What is the maintenance schedule for an oxygen analyzer?

Regular maintenance includes calibrating the device as per the manufacturer’s instructions, checking for sensor integrity, and replacing parts like filters or sensors when necessary. Regularly clean the exterior and ensure proper storage when not in use.