- Trusted Seller
2012 Freezer HAIER 100l; -86°C
- Manufacturer: HAIER
External dimensions: length: 770mm; width: 830mm; height: 1120mm Internal dimensions: 470x450mm; Depth: 480mm 240V/50Hz; 6A; 650W Lid opens at the top With CE Last tested 09/2023
Amel, Belgium - Trusted Seller
Gasing unit laempe G2C1 for cores up to 25l
- Manufacturer: Laempe / Röperwerk
3+3kW; 380V with double heater Year: 1991 | Weight: ±250kg
Amel, Belgium - Trusted Seller
2002 Gravity die casting machine IMR C60X
- Manufacturer: IMR
Dimensions: Length: 3150mm; Width: 2500mm; Height: 1960mm 6KW; 400V; 50Hz Max opening of clamping plates: 700mm, side stroke: 335mm Hydraulic tank: 200l, max pressure: 60bar With 2 split dip tanks With light barr...
Amel, Belgium - Trusted Seller
AIR CHOC 50 l
Type: 0501030A, serial number: 050 Weight: 48 kg | External dimensions: 870 mm x 800 mm, Ø 300 mm | Performance pressure: max. 12 bar | Minimum temperature: - 20°C | Maximum temperature: + 120 °C | Air pipe exit:...
Amel, Belgium - Trusted Seller
Sand conveyor KLEIN 200 l
Outside dimensions: Ø 750 mm, inlet height: 1450 mm Cone closing 8 bar, content 200 L, 100°C Overhauled with a new switch cabinet
Amel, Belgium - Trusted Seller
Core shooter LAEMPE 40 l
- Manufacturer: Laempe / Röperwerk
Air tank 100 l, clamp with vacuum plate Gassing carriage with vacuum clamping, gassing plate 1000 mm x 800 mm Electronic control PLC B&R (BERCHNECKER UND RAINER), Type NT33 Welded construction Motor for the hydra...
Amel, Belgium - Trusted Seller
Ingot 10 steel trestles for residual liquid max +- 400 C°
- Manufacturer: Stahl
10 moulds with a volume of ±3l External dimensions: Length: 1500mm; Width: 750mm; Height: 800mm Mould dimensions: Length: bottom: 550mm; Length: top: 640mm; width at top: 110 mm; width at bottom: 30 mm Fold back ...
Amel, Belgium - Trusted Seller
Sand conveyor 170 l, R.DEBUS
Input Ø 210 mm, output Ø 100 mm, with pressure controller Filling system by cone, max. temperature 200°C, pressure 6 bar, content 170 l With compressed air accelerator on the bottom
Amel, Belgium - Trusted Seller
1972 Sand conveyor 200 l, KLEIN
With 2 level detectors Weight: 300 kg | Outside dimensions: Ø 700 mm, h. 1800 mm | Pressure: 8 bar, 100 °C
Amel, Belgium - Trusted Seller
1995 Pneumatic dust conveyor BOGGI+LEGNANI 50 l
- Manufacturer: Legnani
Serial number: 74057, construction year: 1995, weight: ± 100 kg Ø 470mm Operating pressure 8 bar With one pneumatic clap Input sand Ø 150mm Temperature 200°C Capacity 50 l Is adapted to silo S3104 of 19m³ Appropr...
Amel, Belgium - Trusted Seller
1972 Pneumatic sand transport 250 l, RONOT
Serial number: 16083, construction year: 1972 Max operating pressure 4 bar Max operating temperature 25°C Pneumatic clap (valve) Sensor with 2 flaps at the entrance Sand input Ø 145 mm, sand output Ø 70mm Capacit...
Amel, Belgium - Trusted Seller
1990 Pneumatic sand conveyor KLEIN, 75 l
Construction year: 1990, weight: 150 kg With measuring head full-empty max. temp.200 C°
Amel, Belgium - Trusted Seller
1987 Hydraulic core shooter VOGEL & SCHEMMANN, 15 l
- Manufacturer: Vogel
Type: KSM61500 CB/0C02, serial number: 4323, Com. number: 18.828 In good condition Completely equipped in cold box, with cabin, automatic control, all the movements are hydraulic Max dimensions of core boxes: hei...
Amel, Belgium - Trusted Seller
2010 Pneumatic conveyor 30l HENSEL with small hopper
- Manufacturer: HENSEL
Dimensions: Length: 350mm; Width: 350mm, Height: 1500mm With small hopper and butterfly valve With CE mark on the conveyor
Amel, Belgium - Trusted Seller
Dust conveyor 150 l, KLEIN, type A15O
Year of construction: 1968, serial number: 058 For 100°C - 8 atmospheres With 2 sondes - is complete except one sonde SP overtaken = with switch cabinet Dust feeder
Amel, Belgium

