Used controller

Vibration polishing machine ROTO FINISH, 1100 mm x 420 mm

4 kW, 380/440 V, 7 A, turns left-right Ø 220mm trap exchange stones Vibration by unbalance motor Vibration with stones and water Rubber inside, in good condition With polishing stones Without control box Delivery...

Core sand mixing plant, ± 2 - 3 t/h

Brand: BADIE, serial number: 7,79 mixingcup contenance 60 lit. With batch mixer Mixtensif, type KSU100, Ø 600 mm, for 120 kg sand With sand hopper above the mixer With 2supports for 60 l drums With 2 pumps and PL...

Screw mixer 5 t/h, with silo 2 m³, high speed

Copy IMF ± 12 kW, 220/380 V; ± 1000 rpm With additiv vis, length 900 mm, Ø 70 mm Mixer 9.2 kW; ± 980 rpm With silo ± 2 m³, 3 pumps, mix screw hinged, exhaust ventilator and 2 tanks with control board

2018 Pouring installation HWS P-20-R; 4 x ladles 2t

• Manufacturer: HWS

With 4 ladles and 2 ladle lids Pouring time stationary: 17kg/s; synchronised: 8kg/s Max acceleration with synchronised movement to the moulding system: 0.25m/s2 With SIEMENS S7 control cabinet and GLS2010 monitor...

Die casting cell (DGA 79) Bühler Evolution B 84 DV

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, Striko Westofen, type W 90 SL, year 1996, SN 5043, capacity 900 kg, volume 820 dm³, temperature max. 1,000° C, metal AL, control, Westofen, type Westronics BG; cold cham...

Die casting cell (DGA 70) Bühler SC D/84V

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, ZPF, type W 65 DS, year 2012, SN F4-12-0181, capacity 650 kg, heating capacity 18.0 kW, max. temperature 850° C, metal AL, empty weight 2,600 kg, control system, ZPF (ba...

Die casting cell (DGA 80) Bühler Evolution B 120 DS

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, Foundry 4 Thermo, type TD1100AE, year 2016, SN F4-15-0339, empty weight 3,000 kg, heating capacity 22 kW, capacity 1,200 kg, max. temperature 850° C, metal AL, control, ...

2014 Core shooter LAEMPE LL10

• Manufacturer: Laempe / Röperwerk

Core shooter: Shooting volume: 15 litres (was expanded later for larger shot volumes) Dimensions of the machine: Length: 2100mm; Width: 2050mm; Height: 2080mm For horizontally and vertically separated core boxes ...

NEW gassing units LÜBER, type LW-FDA 1640

• Manufacturer: Lüber
• Model: LW-FDA 1640

Brand Lüber With heating 16 kW Max core weight 80 kg (± 55 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1,5" (Ø 40 mm) With micro pump, gasdosing by rotameter Compressed air ...

Coreshooter LAEMPE L10

• Manufacturer: Laempe / Röperwerk

With vacuum clamping device, plates 300mm x 200mm With core extraction slide 380mm x 300mm With gassing plate and ejector plate With hydraulic unit Maximum core box dimensions: width ± 700mm, depth ± 650mm, heigh...

Moulds turnover machine, 1800 mm IMF

Brand: IMF, serial number: 15462Weight: 3200 kg1425 rpm. ; 4 kW; 220/380 V2 clamping jaws 2 000 mm x 250 mmClamping and rotary movement hydraulicallyWith hydraulic unit ASEAMax. clamping width: 1750 mmWith contro...

Die casting cell (DGA 77) Bühler Evolution 66 D

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, Foundry 4 Thermwos, type W 650 S, year 2018, SN F4-18-0475, empty weight 2,775 kg, heating capacity 18 kW, capacity 650 kg, max. temperature 850° C, metal AL, control, S...

NEW gassing units LÜBER, type LW-FDA 825i

• Manufacturer: LÜBER
• Model: LW-FDA 825

Outside depth 625 mm With heating 8 kW Max core weight 35 kg (± 25 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" (Ø 25 mm) With micro pump, gasdosing by rotameter Compresse...

NEW gassing units LÜBER, type LW-FDA 825

• Manufacturer: Lüber
• Model: LW-FDA 825

Outside depth 625 mm With heating 8 kW Max core weight 35 kg (± 25 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" (Ø 25 mm) With micro pump, gasdosing by rotameter Compresse...

Semi-automatic moulding line HWS / HSP 2

50 complete moulds on the plant 4 pouring and cooling lines (partly motorized) 1 mould return line with 3 turnings stations2 transfer carriages 1 mobile push-out station Remolding by hand with chain hoist SIEMENS...