Used Foundry & Casting in Baden-Württemberg, Germany

1999 OMS Die Casting Cell

consisting of melting furnace Striko West furnace W 65 SL, built in 1997, serial no.: 55288, die casting machine OMS, spraying robot Fanuc, incl. robot control, parts removal robot Kuka KR 15-2 built in 1999 incl...

2007 Frech DAK 580/62 Die Casting Cell

• Manufacturer: Frech

consisting of dosing furnace Westomat 65 S, 540 dm3, . 4568, Die casting machine Frech DAK 580-62, Spraying robot Fanuc m710ic, incl. robot control and touch panel, Parts removal robot Fanuc R2000ic, incl. robot ...

1994 FRECH MOS 5/20 U

• Manufacturer: Frech

Used furnace for use on DAW5 or DAW20 die casting machines without furnace cabinet

2004 Robamat 5201

• Manufacturer: Robamat

Used heating device from Robamat for use on die casting machines. This single-circuit device is designed for temperature control of a die casting tool with oil. Dismantled from ongoing production. The device was ...

2017 ROBAMAT 2212

• Manufacturer: ROBAMAT

Used Robamat heating and cooling unit for use on die casting machines. This dual-circuit device is designed for the temperature control of a die casting tool with water. The device was checked, serviced and repai...

1998 FRECH Weightcontrol 2000

• Manufacturer: Frech

Used scales for use on die casting machines up to a unit weight of 2000gr. The device was checked and repaired by the manufacturer. Weighing cell and control board replaced

2001 FRECH M200/120

• Manufacturer: Frech

Used machine furnace make Meltec type M 200/120 for use on hot chamber die casting machines make Oskar Frech with 200 tons for processing magnesium alloys. Melting capacity per hour 120kg/h 54 kW connected load. ...

2014 FRECH ZC200/250

• Manufacturer: Frech

Used machine furnace make Meltec type ZC 200/250 for use on hot chamber die casting machines make Oskar Frech DAW 200 for processing zinc alloys. Melting capacity per hour 250kg/h 36 kW connected load. Switch cab...

2024 FRECH W200Zn-ST

• Manufacturer: Frech

Equipment of the machine 1.1.1 Motorized safety gate on the right in the casting direction 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment package - energy efficiency 2.0.1 Ejector assista...

2024 FRECH W80Zn-RC

• Manufacturer: Frech

Equipment of the machine 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment...

2000 FRECH DAW 80S

• Manufacturer: Frech

Overhauled die casting machine DAW 80 GO on DataLogic control for the use of zinc alloys. Available on request.

2003 Frech Espana DAW 125 PD SBC3

• Manufacturer: Frech

Used die casting machine DAW 125 with SBC3 control for the use of zinc alloys. Available as a basis for a general overhaul at the manufacturer's plant

1995 FRECH DAW 200S

• Manufacturer: Frech

Used die casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available by arrangement The manufacturer recommends a general overhaul in the overhaul plant. This can be carried out on requ...

2024 FRECH W50Zn-RC

• Manufacturer: Frech

Equipment of the machine 1.0.1 Locking part cover on the base frame 1.0.2 Closing part cover on the base frame for scales / chute 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine bearings 1.5.4...