Used controller in Netherlands

Okuma LC40

• Manufacturer: Okuma
• Model: LC40
• Spindle bore: 52 mm

Cnc mark: Okuma | Turning diameter above the bed: 600 mm ø | Turning diameter above the support: 480 mm ø | Maximum turning diameter: 600 mm ø | Maximum turning length: 500 mm | 3-claw automatic: 300 mm ø | Spin...

Okuma - LT2000EX

• Manufacturer: Okuma
• Model: LT2000 EX
• Spindle bore: 52 mm
• Power requirement: 15 kW

The Okuma LT2000EX is a high-precision, twin-spindle, twin-turret CNC turning center designed for complex, multi-tasking operations. It's especially useful for high-productivity environments where simultaneous ma...

Okuma - LVT-300 M

• Manufacturer: Okuma
• Model: LVT300

X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos

Okuma - LB 3000 EX-II

• Manufacturer: Okuma
• Model: LB3000 EX II
• Spindle bore: 105 mm

Max. turning ø: 530 mm | X-axis: 260 mm | Z-axis: 995 mm | Spindle bore: 80 mm | Speedrange: 5000 Rpm | Spindle power: 22 kW | Subspindle speeds: 6000 Rpm | Subspindle bore: 62 mm | Subspindle power: 11 ...

Okuma - LB 3000 EX

• Manufacturer: Okuma
• Model: LB3000 EX
• Spindle bore: 52 mm

Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours

Okuma LB10 I CNC Lathe

• Manufacturer: Okuma
• Model: LB10
• Spindle bore: 43 mm

We hereby offer this used Okuma LB10 CNC lathe from 1996, located in The Netherlands. Equipped with the advanced Okuma LSP 5000 L control unit, it ensures seamless operation and precise control over every machini...

Okuma LR 25 I CNC Lathe

• Manufacturer: Okuma
• Model: LR 25

We hereby offer this used Okuma LR 25 CNC lathe, located in The Netherlands. This robust and reliable machine is equipped with the Okuma OSP 5000 LG control unit, known for its intuitive interface and high-perfor...

Okuma LT-10MY I CNC Lathe I 1997

• Manufacturer: Okuma
• Model: LT-10MY

We hereby offer this used Okuma LT-10M CNC lathe from 1997, located in The Netherlands. This CNC lathe is equipped with a Okuma OSP-U100L control unit, offering precision and reliability for complex turning tasks...

Okuma - LH55-N

• Manufacturer: Okuma
• Model: LH55N
• Spindle bore: 360 mm

Chip conveyor SMW Front and Rear chuck 700 mm Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws

Okuma LC10

• Manufacturer: Okuma
• Model: LC10

1995 Okuma LH35-N

• Manufacturer: Okuma
• Model: LH35N
• Spindle bore: 52 mm

This Okuma LH35-N was manufactured in 1995. A robust horizontal turning machine, it offers reliable performance for various machining tasks. If you are looking to get high quality turning capabilities consider th...

Okuma OSP7000M

• Manufacturer: Okuma
• Model: OSP7000M

Okuma electric Okuma MC-600H Okuma VAC3 - Drive Unit FUB-DR, FUB-P4R2, FUB-P4M4 Okuma BLII-D YD Servo Drive 30 30 A Okuma BLII-D YD Servo Drive 75 75 A Okuma Pulse Handwheel F5414-019-783 BLIV-D100A BLIV-D7575A O...

Okuma MX-45VAE

• Manufacturer: Okuma
• Model: MX45VAE

Cnc mark: Okuma | Cnc type: OSP700M | Construction year: 1996 | Table length: 1.000 mm | Table width: 460 mm | X: 760 mm | Y: 460 mm | Z: 450 mm | Spindle recording: ISO40 | Rpm minimum: 50 RPM | Maximum speed: ...

Okuma MC-600H

• Manufacturer: Okuma
• Model: MC-600H

Cnc mark: Okuma | Cnc type: OSP7000M | Construction year: 1995 | Table length: 630 mm | Table width: 630 mm | Number of pallets: 2 | X: 1.000 mm | Y: 750 mm | Z: 800 mm | Spindle recording: ISO50 | Rpm minimum: ...

Okuma MC-5VA I Vertical Machining Center

• Manufacturer: Okuma
• Model: MC-5VA

We hereby offer this used Okuma MC-5VA vertical machining center, located in The Netherlands. Equipped with the advanced Okuma OSP5020M control unit, it ensures smooth and efficient operations. The machine featur...