- Trusted Seller
Okuma LB-15IIW CNC Lathe with Sub Spindle
- Manufacturer: Okuma
- Model: LB15
- Spindle bore: 55.88 mm
Imperial Metric Okuma LB-15IIW CNC Lathe Sub spindle
Elk Grove Village, IL - Trusted Seller
10" chuck Okuma LB-15 2 Axis Slant Bed Turning Center
- Manufacturer: Okuma
- Model: LB15
Imperial Metric Okuma Model LB15 2 Axis Slant Bed Turning Center Equipped With: OSP 5020L Cnc Control Tailstock 10" 3 Jaw Chuck Chip Conveyor
Elk Grove Village, IL 
1988 Okuma LB15
- Manufacturer: Okuma
- Model: LB15
CNC Turning Center Control: OSP5000L-G | Swing over bed: 21.65" | Swing over cross slide: 15-3/4" | Max turn diameter: 9.84" | Max turning length: 19-5/8" | Spindle speeds: 7-4,200 RPM | Spindle thru hole: 2.2" |...
Town of Rockingham, VT
1986 Okuma LB15
- Manufacturer: Okuma
- Model: LB15
- Spindle bore: 60.96 mm
CNC Turning Center Control: OSP5000L | Chuck size: 8" | Maximum swing: 15.75" | Maximum cutting diameter: 9.84" | Maximum machining length: 19.69" | X-axis travel: 6.89" | Z-axis travel: 20.47" | Rapid traverse: ...
Town of Rockingham, VT
1990 Okuma LB15
- Manufacturer: Okuma
- Model: LB15
CNC Turning Center -EQUIPPED WITH- 10" Kitagawa Hyd 3 Jaw Chuck (1) Set of Quick Change Jaws Chip Conveyor All Books & Manuals
Town of Rockingham, VTOKUMA LATHE - CNC LB-15
- Manufacturer: Okuma
- Model: LB15
PART: 12484 - OKUMA LATHE - CNC LB-15 USED GOOD CONDITION
Chihuahua, MexicoOKUMA CIRCUIT BOARD E4809-045-044 38-33 OKUMA LB15-1S CNC LATHE
- Manufacturer: Okuma
- Model: LB15
THIS PART CAME AN OKUMA LB15-1S CNC LATHE WITH OSP 5000L CONTROL
Los Angeles, CAOKUMA LB15 CNC LATHE SHEFFER 90 PNEUMATIC COLLET CHUCK NOSE 38ZA-4472 6927 D-2
- Manufacturer: Okuma
- Model: LB15
NEXT DAY UPS AIR SERVICE AVAILABLE ON OUR UPS ACCOUNT ONLY. WE OFFER A 120 DAY WARRANTY ON ALL PARTS.
$360 USDLos Angeles, CAOKUMA LB15 II PALLET 250225 75
- Manufacturer: Okuma
- Model: LB15 II
HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...
Los Angeles, CA- Trusted Seller
OKUMA LB-15 2 Axis CNC Lathe
- Manufacturer: Okuma
- Model: LB15
Imperial Metric Okuma Model LB15 2 Axis Slant Bed Turning Center OSP 5000L-G CNC Control Tailstock
Elk Grove Village, IL - Trusted Seller
Okuma LB15 CNC controlled lathe
- Manufacturer: Okuma
- Model: LB15
With 12 tool positions. Have been to a technical school - very nice.
Harndrup, Denmark - Trusted Seller
OKUMA LB 15 C CNC SLANT BED LATHE
- Manufacturer: Okuma
- Model: LB15
Complete with: - n. 1 x 12 positions turret - n. 1 self centering chuck Ø 200 mm. - chipconveyor
Arluno, Italy - Trusted Seller
Okuma LB15IIM CNC Lathe with Okuma CNC Control
- Manufacturer: Okuma
- Model: LB15
Okuma LB15IIM CNC Lathe with Okuma CNC Control, Autoblok 250mm Powered Chuck, 12 Position Tool Turret, Tailstock, Swarf Conveyor. S/No. 1511 - No CE Mark, Terms and Conditions Apply
Ferrara, Italy - Trusted Seller
Okuma LB15II CNC Lathe. S/No 2100 with Okuma CNC Control
- Manufacturer: Okuma
- Model: LB15 II
Okuma LB15II CNC Lathe S/No 2100 with Okuma CNC Control, 140mm Collet Chuck, 12 Position Tool Turret, Tailstock, IEMCA TS560/37/P Barfeeder. S/No. 95091999 - CE Mark
Ferrara, Italy - Trusted Seller
Okuma LB15II CNC Lathe S/No. 1910 with Okuma CNC Control
- Manufacturer: Okuma
- Model: LB15 II
Okuma LB15II CNC Lathe S/No. 1910 with Okuma CNC Control, 140mm Collet Chuck, 12 Position Tool Turret, Tailstock, IEMCA TS560/37/P Barfeeder. S/No. 95092986 - CE Mark
Ferrara, Italy 
Okuma LB15 II CNC Lathe
- Manufacturer: Okuma
- Model: LB15 II
Good condition Okuma LB15 II CNC Lathes available between 1995 and 1998 years. Located in Slovakia and other countries. Click request price for more information.
Slovakia
Tip: Enter manufacturer, model or keyword
