Building Filters

285

Used Okuma in Japan

  • Trusted Seller
    2007 OKUMA LB4000EX-750

    2007 OKUMA LB4000EX-750

    • Manufacturer: Okuma
    • Model: LB4000 EX
    • Spindle bore: 52 mm

    Machine Specifications ○NC Unit OSP-P200L Easy Dialogue Advance ○Spindle Chuck: 10-inch Hollow Chuck, Kitagawa B-210 Spindle Speed: 42-4200 rpm Motor: 30/22 kW ○Capacity Swing Over Bed: φ670 mm Maximum Workpiece:...

    Tokyo, Japan
  • Trusted Seller
    2016 OKUMA GENOS L400H

    2016 OKUMA GENOS L400H

    • Manufacturer: Okuma
    • Model: GENOS L400
    • Spindle bore: 52 mm

    Machine Specifications ○NC Control OSP-P300L ○Spindle Chuck: 12-inch, 3-jaw, solid, Kitagawa N-12 Spindle Speed: 3000 rpm Motor: 11/7.5 kW ○Capacity Swing Above Bed: φ520 mm Maximum Workpiece: φ390 mm x L500 mm ○...

    Tokyo, Japan
  • Trusted Seller
    2009 OKUMA GP-47FIIx1500

    2009 OKUMA GP-47FIIx1500

    • Manufacturer: Okuma
    • Model: GP47

    Machine specification ○NC Device OKUMA OSP-U10G ○Capacity Swing x Center distance φ430mm x L1500mm [Max. grinding diameter φ400mm] ○Wheel Outer diameter φ760 x width 150mm Grinding wheel peripheral speed 45m/sec ...

    Tokyo, Japan
  • Trusted Seller
    2020 OKUMA GENOS M560-V

    2020 OKUMA GENOS M560-V

    • Manufacturer: Okuma
    • Model: Genos M560-V

    Machine specification ○NC Device OSP-P300MA ○ Table Size of work surface 1300mm×560mm Maximum loading weight 900kg ○ Travel X-axis 1050mm Y-axis 560mm Z-axis 460mm ○ Spindle BT40 Spindle speed 12000rpm 20 ATCs Mo...

    Tokyo, Japan
  • Trusted Seller
    2009 OKUMA LB4000EX-1500

    2009 OKUMA LB4000EX-1500

    • Manufacturer: Okuma
    • Model: LB4000 EX
    • Spindle bore: 52 mm

    Machine Specifications ○NC Unit OSP-P200L ○Spindle Chuck: 12-inch Hollow Chuck, Kitagawa B-212 Through Hole: φ80mm, Inside Draw Tube Spindle Speed: 42-4200 rpm Motor: 30/22 kW ○Capacity Swing Over Bed: φ670mm Max...

    Tokyo, Japan
  • Okuma LS

    Okuma LS

    • Manufacturer: Okuma
    • Model: LS

    10-inch 3-jaw chuck, 800 rpm between centers, spindle speed 35-1800 rpm If there is any discrepancy between the content and the actual product, the actual product will take precedence.

    Tatebayashi, Japan
  • Okuma LT

    Okuma LT

    • Manufacturer: Okuma
    • Model: LT

    If there is a difference between the content and the actual item, the actual item will be given priority.

    Tatebayashi, Japan
  • 2005 Okuma LU300

    2005 Okuma LU300

    • Manufacturer: Okuma
    • Model: LU300

    OSP-E100L 12-inch chuck Upper: 12-sided Lower: 8-sided With center Right-hand chip conveyor Center distance 600 If there is a discrepancy between the contents and the actual product, the actual product will take ...

    Tatebayashi, Japan
  • 2005 Okuma LCS-250

    2005 Okuma LCS-250

    • Manufacturer: Okuma
    • Model: LCS-250

    OPS-E10L-B 8-inch 3-jaw hollow chuck (Kitagawa/B-208) 8-sided turret with tool presetter Right-hand chip conveyor Easy dialogue included If there is a discrepancy between the contents and the actual product, the ...

    Tatebayashi, Japan
  • 2003 Okuma LB300-MY

    2003 Okuma LB300-MY

    • Manufacturer: Okuma
    • Model: LB300 MY

    OSP-E100L 8-inch 3-jaw hollow chuck (Kitagawa/B-208) 12-sided compound turret with Y axis, center, tool presetter, right-hand chip conveyor If there is a discrepancy between the contents and the actual product, t...

    Tatebayashi, Japan
  • 2003 Okuma LCS-15

    2003 Okuma LCS-15

    • Manufacturer: Okuma
    • Model: LCS-15

    OSP-E10L 8-inch 3-jaw hollow chuck (Kitagawa/B-208) 8 square turret with center Post-loading chip conveyor If there is any discrepancy between the content and the actual product, the actual product will take prio...

    Tatebayashi, Japan
  • 2001 Okuma LB400

    2001 Okuma LB400

    • Manufacturer: Okuma
    • Model: LB400

    OSP-U100L 10-inch 3-jaw chuck (Kitagawa/B-210) 12-sided turret Spindle through diameter 70 Center distance 700 With center With tool presetter With dialogue ★X-axis bearing replacement If there is a discrepancy b...

    Tatebayashi, Japan
  • 2003 Okuma LB200-MY

    2003 Okuma LB200-MY

    • Manufacturer: Okuma

    OSPE-100L Collet chuck (50φ) 12 square turret (with Y-axis) With tool presetter With parts conveyor With parts catcher Auto bar 1m specification (ASQ-51) If there is any difference between the contents and the ac...

    Tatebayashi, Japan
  • 2007 Okuma MB-56VA

    2007 Okuma MB-56VA

    • Manufacturer: Okuma
    • Model: MB56VA

    OSP-P200M BT40 ATC20 pcs Table size 1300 x 560 Spindle speed 15000 rpm Stroke X1050 Y560 Z460 Pull stud bolt MAS2 If there is any discrepancy between the contents and the actual item, the actual item will take pr...

    Tatebayashi, Japan
  • 2007 Okuma MA-500HB

    2007 Okuma MA-500HB

    • Manufacturer: Okuma
    • Model: MA-500HB

    OSP-P200M BT50 ATC60 spindle speed 6000rpm 6 pallet 500 square with right hand chip conveyor with magnetic separator with center through with touch sensor If there is any discrepancy between the contents and the ...

    Tatebayashi, Japan
  • no-image_en.png

    Okuma Multus B750 CNC Lathe

    • Manufacturer: Okuma
    • Model: Multus B750

    Good condition Okuma Multus B750 CNC Lathes available between 2010 and 2016 years. Located in USA and other countries. Click request price for more information.

    USA
12345