Used accessories

Okuma OEY-OKM-2.2KW CNC Lathe Hydraulic Power Unit 30L/Min Toyooki Pump 40L Tank

• used

• Manufacturer: Okuma

In Good Used Condition. Was removed from an LU-25 Okuma Lathe. Okuma OEY-L-STD-2.2KW 40 Liter tank capacity. 16"x 17"x 11" If this item ships as Flat Rate Freight please see details in Shipping tab

2007 OKUMA VTM-100

• used

• Manufacturer: Okuma
• Model: VTM100

The VTM-100 3-axis vertical turning center combines the benefits of a vertical lathe with those of a machining center. The 50-taper 36-tool magazine enables this machine to offer both turning and milling operatio...

Okuma LC10

• used

• Manufacturer: Okuma
• Model: LC10

2008 OKUMA LB 3000 EX MY

• used

• Manufacturer: Okuma
• Model: LB3000 EX MY

Type: CNC LATHE | Condition: Used | Status: Good | Control type: Okuma OSP P200L | Max diameter workable: Ø 400 mm | Max. length workable: 500 mm | Bar feeder: Iemca Master mod. 880 33 P/R | Automatic presetting...

1995 OKUMA LB 15 II

• used

• Manufacturer: Okuma
• Model: LB15 II

- USED- 2-AXIS CNC LATHE Max rotating diameter: 530 mm | Max turning length: 500 mm | Max turning diameter: 340 mm | Bar capacity: 62 mm | Spindle: 3800 rpm; 11-15 kW; ASA A2-6" | X-axis travel: 260 mm | Z-axis t...

2002 OKUMA 2 SP V80

• used

• Manufacturer: Okuma
• Model: 2SP-V80

Type: 2-SPINDLE VERTICAL LATHE | Condition : Used | Status: Good | Control type: OH-OSP-LGU | Max. swing: Ø 1,000 mm | Max turning diameter : Ø 800 mm | Max. turning length: 840 mm | X axis travel: 465 mm | Z a...

2011 OKUMA LT 2000 EX-3MY

• used

• Manufacturer: Okuma
• Model: LT2000 EX

Type: CNC LATHE | Condition: Used | Status: Good | Control type: Okuma OSP P300 | Distance between centers: 960 mm | Max diameter workable: Ø 210 mm | Xa-xb-xc axis travel: 205 mm | Y axis travel: ± 95 (+50/-45)...

OKUMA LB15II-MW

• used

• Manufacturer: Okuma
• Model: LB15 II MW

Cnc control: OKUMA OSP7000L | Max swing over carriage: Ø 530 mm | Distance between centers: 1.020 mm | Max turning diameter main spindle / sub-sppindle: Ø 340 mm | Max turning lenght: 1000 mm | Draw bar diame...

OKUMA LB 4000 EX C MY 1500 LATHE READY FOR DELIVERY USED REFURBISHED

• refurbished

• Manufacturer: Okuma
• Model: LB4000 EX

The Okuma LB 4000 EX C MY 1500 lathe, offered for immediate delivery, has been completely overhauled and restored to new condition. with the replacement of all parts subject to wear. This machine, ideal for compl...

2016 OKUMA GENOS L400H

• used

• Manufacturer: Okuma
• Model: GENOS L400

Machine specification ○NC Device OSP-P300L ○ Main spindle Chuck 12-inch 3-jaw (Kitagawa) Spindle speed 3000rpm Motor 11/7.5kw ○ Capacity Swing on bed φ520mm Max. workpiece φ390mm×L500mm ○ Tool rest V8 square XZ s...

1996 OKUMA LB 15 II

• used

• Manufacturer: Okuma
• Model: LB15 II

CNC LATHE Other Info Machine is equipped with A LOT OF ACCESSORIES

USED OKUMA VTM 120 YB LATHE

• used

• Manufacturer: Okuma
• Model: VTM120YB

The used OKUMA VTM 120 YB vertical lathe is a precision machine ideal for advanced turning operations. With an impressive machining capacity, it can handle up to 3000 kg of workpiece weight on a maximum diameter ...