Used Machine Tools in Bavaria, Germany

OKUMA - LC20 - CNC lathe with movable tailstock

• Manufacturer: Okuma
• Model: LC20

machine * Manufacturer: Okuma * Type: LC20-1S with tailstock * Machine Type: CNC Lathe (Slant Bed) * Year of construction: approx. 1986 – 1988 * Control: Okuma OSP5000L data * Turning diame...

CNC lathe - CONTUR - SL-40 G - 2006

7800 spindle hours

ROMI - M510 - 2002 - Cycle-controlled lathe

• Manufacturer: Romi

machine * Cycle lathe * Manufacturer: ROMI Indústrias S.A. * Type: M510 * Year of Make: 2002 * Machine Type: CNC Assisted Precision Lathe data * Tip height: 255 mm * Center width: 1500 mm...

GILDEMEISTER N.E.F. 480 CNC Lathe

• Manufacturer: Gildemeister

Machine is cleaned before dispensing With accessories

Banding machine, pallet labeling

• Manufacturer: AETNA Group

Additional title: Roboband / Logomatic | Capacity: 150 paletts / h | Power: 5,5 kW | Current: 10 A | Voltage: 400 Volt | Frequency: 50 Hz | Weight: 1700 kg

IBERIMEX T6 Lead and Pull Spindle Lathe

3-jaw chuck RÖHM

JESSY - Studturn 1430 - 2016 - Lead and pull spindle lathe

JESSEY SUPPORTED TURN 1430 VS – Lathe * Manufacturer: JESSEY * Model: Studturn 1430 VS * Year of Make: 2016 * Serial Number: 8901 * Digital display: VOLZ Type L (2-axis) * Spindle speed max.: 2500 ...

ZIMMER BMS 32

• Manufacturer: Zimmer
• Model: BMS 32
• Throat depth: 210 mm
• Power requirement: 0.75 kW

Standard equipment: - Number of speed ranges 9×2 steps - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw...

VÖST-ALPINE - DA 160 - Lead and Pull Spindle Lathe

• Manufacturer: Voestalpine

Gearbox was removed because a gear wheel was replaced Gearbox must be installed by the buyer

ALZMETALL ALZTRONIC i14

• Manufacturer: Alzmetall
• Model: ALZTRONIC I14
• Throat depth: 190 mm
• Power requirement: 0.7 kW

Standard equipment: 5″ TFT LCD display with touch function: Manual input of spindle speed setpoint setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drillin...

ALZMETALL ALZTRONIC i14

• Manufacturer: Alzmetall
• Model: ALZTRONIC I14
• Throat depth: 190 mm
• Power requirement: 0.7 kW

Standard equipment: 5″ TFT LCD display with touch function: Manual input of spindle speed setpoint setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drillin...

ALZMETALL ALZTRONIC i16

• Manufacturer: Alzmetall
• Model: ALZTRONIC I16
• Throat depth: 190 mm
• Power requirement: 0.7 kW

Standard equipment: 5″ TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function. setpoint, actual speed displa...

MIYANO - BNC-42C 5 - 2012 - CNC lathe

• Manufacturer: Miyano
• Model: BNC42
• Spindle bore: 42 mm

Bar passage: 42 mm Maximum workpiece length: 150 mm (5.9 inches) Maximum speed: 5,000 rpm Spindle motor: 7.5 kW Control: CNC Fanuc Tool magazine: 8 positions Bar feeder: FMB 542 Turbo - 3000 mm Bar diame...

MAXION UNIMAX 3T TAP

• Manufacturer: Maxion
• Throat depth: 260 mm
• Drilling diameter: 25 mm

Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Tapping capacity M20 Spindle MK3 Drilling depth 125 mm throat depth 260 mm Spindle/table 90 to 840 mm Table surface 500 x 365 mm Total he...

ALZMETALL Alzstar 40/SV

• Manufacturer: Alzmetall
• Model: ALZSTAR 40SV
• Throat depth: 293 mm

Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload pro...