Used Sanders

Larick 700 Series Feed‑Through Profile/Brush Sander

Larick 700 Profile Sander The versatile 700 Series customizable feed-through profile sander by Larick is perfect for distressing, polishing, denibbing, and sealer sanding wood, metal, or plastic. A variable speed...

SCMI Sanya Uno Sander

• Manufacturer: SCM / SCMI

SCMI Sandya Uno 37" Wide Belt Sander

Laguna SuperMax? 25?2 Double Drum Sander

• Manufacturer: Laguna

Sand two grits in a single pass with a 25×2 Double Drum Sander. Featuring INTELLISAND ® Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding. Need a larger machine? Check...

OAKLEY OR SIMILAR SINGLE-BELT HAND-BLOCK SANDER

• Manufacturer: OAKLEY OR SIMILAR SINGLE-BELT HAND-BLOCK SANDER

OAKLEY OR SIMILAR SINGLE-BELT HAND-BLOCK SANDER S/N:N/A, (230/460/60/3 electrics), H-2112 Standard Specifications: *Inquire for additional specifications*

Laguna SuperMax? 13? Combination Brush/Drum Sander

• Manufacturer: Laguna

The 13″ Combination Brush/Drum is the answer to your production bottleneck. Developed with moldings in mind, this versatile sander can tackle every step in your finishing process, from sanding raw wood to sanding...

Pneumatic Sanders

Pneumatic Sanders

Ritter R25814 14″ Tall Oscillating Edge Sander

• Manufacturer: Ritter

Ritter bills this as a CR25814 DRAWER BOX SANDER…….the reality is that it has 16″ X 56″ platens not only makes it a drawer box sander, it makes it a tall flexible sander that also oscillates. 10 HP Abrasive Belt ...

Laguna MW37 Pro Metal Wide Belt Sander

• Manufacturer: Laguna

Offering metal deburring, sanding, and texturing, the Pro Line of Metal Wide Belt Sanders from LAGUNA gives a new level of production perfection. With a 20HP motor, 37″ wide work table, and an auto-height adjustm...

Laguna MWW51 Pro Metal Wide Belt Sander

• Manufacturer: Laguna

Offering metal deburring, sanding, and texturing, the Pro Line of Metal Wide Belt Sanders from LAGUNA gives a new level of production perfection. With a 30HP motor, 51″ wide work table, and an auto-height adjustm...

Rodgers 40A 6″ X 49″ Edge Sander

Rodgers 40A Edge Sander is powered by a 5 hp 230/460V/3-Phase motor currently wired 230V. The cast iron platen (with NEW graphite) is 8″ tall and 49″ long giving it a 6″ X 49″ capacity. The side table measures 12...

Ritter R258 Oscillating Universal Edge Belt Sander

• Manufacturer: Ritter

7.5 HP Abrasive Belt Drive Motor, TEFC 1 HP Oscillating Dive Motor 8″ X 144″ Abrasive Belt Size 10″ X 56″ Phenolic Platen 6-Way Adjusting Front Table Steel Tilting End Table Raising and Lowering Device Form Block...

20" Pedestal Type Disc Sander; 10" x 27-1/2" Tilting Work Table, 2 HP, 1,170 RPM, 6 Amp, 230 Volt

20" Pedestal Type Disc Sander; 10" x 27-1/2" Tilting Work Table, 2 HP, 1,170 RPM, 6 Amp, 230 Volt, 3 Phase

CAMAM LEC-200 AV, ORBITAL SANDER

• Manufacturer: Camam

CAMAM LEC-200 AV, PLANETARY/ORBITAL SANDER S/N:345, (220/60/3 electrics) Ideal for sanding straight and curved pieces of round or oval cross section (chair, table, bed, crib, and handle components, etc.) Stan...

Laguna MW51 Pro Metal Wide Belt Sander

• Manufacturer: Laguna

Offering metal deburring, sanding, and texturing, the Pro Line of Metal Wide Belt Sanders from LAGUNA gives a new level of production perfection. With a 30HP motor, 51″ wide work table, and an auto-height adjustm...