Used Processing in Marche, Italy

BERTOCCO AI0554

• Manufacturer: BERTOCCO

Fluid: Oil | Max temperature c: 170° | Heating kw: 4.5 + 4.5 | Tank capacity lt: 25 | Pump power kw: 0.15 | Pump flow rate lt/min: 3 - 15

1995 ENGIN PLAST AI1021

• Manufacturer: ENGIN PLAST

1985 F.LLI PUGNO N180 AI0572

• Manufacturer: F.LLI PUGNO

AE0036

Mixer silos - Height 2500 mm - Diameter 900 mm Capacity dm3: 750

1994 AI0254

1994 CALPEDA NGC3 AE0066

• Manufacturer: Calpeda

1996 AI0270

Hole diameter: 16mm; No. 2 cooling fans. Internal diameter of the sprue mm: 460 | Rated power kw: 0.18 | Voltage v: 380

2002 FRIGEL ED50 AI0013

• Manufacturer: FRIGEL

H2o conditions: water and glycol | Gas type: no gas | Cooling power kw: 50 | Tank capacity lt: 300 | Compressor no.: no | Voltage v: 400 + 220 | Pump: 1 | Pump kw flow rate: 1,5 | Pump flow rate l/min: 192

2002 KS AUTOMATIK 2030802 AI0395

• Manufacturer: KS AUTOMATIK

NEW CARPET Electrical cabinet: No | Tape timer: No | Robot interface: No | Tape type: Straight | Carpet type: Smooth | Tape length mm: 1500 mm | Belt width mm: 210 mm | Tape height mm: Maximum: 700 mm - Minimum: ...

2008 KS AUTOMATIK 8102004 AI0391

• Manufacturer: KS AUTOMATIK

NEW CARPET Electrical cabinet: No | Tape timer: No | Robot interface: No | Tape type: Straight | Carpet type: Smooth | Tape length mm: 1500 mm | Belt width mm: 210 mm | Tape height mm: Maximum: 700 mm - Minimum: ...

1997 MANNESMANN DEMAG PKV1 V1 AE0063

• Manufacturer: Mannesmann Demag - Meer

2000 AI0223

Heating furnace

Heating furnace for strisce/belts. Can be integrated with Tecno System working lines: Adjustable transport speed; Electronic temperature control; Anti-adherent transport cover.

BRUSHING MACHINE VOL180 FOOTWEAR EDGE POLISHING BRUSH WITH ELECTRONIC SPEED VARIATOR AND BUILT-IN SUCTION

Width: 770mm; | Depth: 500mm; | Height: 1300mm; | Weight: 72Kg; | Speed: 400-2400rmps; | Engine: 0.75Hp; | Aspirator: 0.3Hp; | Air flow rate: 360m/h; | Power: 1Hp; | Noise: 70dB(A).

COUPLER C6ROdep

The simple, robust, easy-to-maintain laminating machine is intended for applications where high pressures and temperatures are important, while maintaining very low costs in relation to high productivity. It allo...