Keysight (Agilent) N9038B
used
- Manufacturer: Agilent - Keysight
Details Keysight (Agilent) N9038B 3Hz To 44GHz Mxe EMI Test Receiver Description: Frequency Range: 3 Hz to 44 GHz Maximum Analysis Bandwidth: 160 MHz Maximum Real-Time BW: 160 MHz DANL @1 GHz: -174 dBm Perform EM...
Dublin, IrelandNoiseKen FNS-AX3-B50
used
- Manufacturer: NoiseKen
Details The Noiseken FNS-AX3-B50 is an advanced Fast Transient Burst Simulator designed for complance testing in accordance with IEC61000-4-4 edition 2. This unit features Pulse Outputs up to 4.8 kV at 2 MHz Puls...
Dublin, IrelandChase LFR1000
used
Details The Chase LFR1000 delivers accurate low-frequency spectrum analysis from 9 kHz to 150 kHz, with a noise-floor sensitivity of –120 dBm and a dynamic range exceeding 100 dB. It features a 1 Hz resolution ba...
Dublin, IrelandKeysight Technologies 8546A
used
- Manufacturer: Agilent - Keysight
Details The Keysight (Agilent) 8546A EMI Receiver, composed of the 85462A RF Section and 85460A RF Filter Section, is a CISPR 16-1 compliant system for precise EMI testing from 9 kHz to 6.5 GHz. It enables confor...
Dublin, IrelandSyntheSys Research BSA17500CSI
used
- Manufacturer: SyntheSys Research
Details SyntheSys Research BSA17500CSi The SyntheSys Research BERTScope 17500CSi advanced the BERTScope Family to 17.5 Gb/s and covers today’s serial data interfaces from 1Gb Ethernet (GbE) to 10 GbE and are desi...
Dublin, IrelandHaefely IP4A
used
- Manufacturer: Haefely
Details The Haefely IP4A Capacitive Coupling Clamp is a capacitive coupling clamp for superposition of bursts on data lines in accordance with IEC/EN 61000-4-4. Features include: maximum cable size 40mm minimum t...
Dublin, IrelandHaefely PIM120
used
- Manufacturer: Haefely
Details Haefely PIM120 (call for availability) The Haefely PIM120 Impulse Module is used with the PCD120 to test telecom systems using the 10/700us impulse (also called telecom impulse). This impulse is character...
Dublin, IrelandHaefely PCD120
used
- Manufacturer: Haefely
Details Haefely PCD120 The Haefely PCD120 CDN, as part of the PSURGE 8000 system is tailored to meet the ITU and IEC requirements for 2 & 4 wire interfaces. It allows the selection of both the required resistors ...
Dublin, IrelandEMC Partner TRA2000
used
- Manufacturer: EMC
Details The EMC Partner TRA2000 Transient Test System offers full compliance CE Mark and ANSI transient test solutions. A choice of 4kV or 6kV SURGE generators with Combination, 100 kHz Ring, and 10/700 waves plu...
Dublin, IrelandHaefely PIM100
used
- Manufacturer: Haefely
Details Haefely PIM100 The Haefely PIM 100 as part of the PSURGE 8000 Surge Platform System can be used together with Coupling/Decoupling Networks (CDNs) for superimposition of the impulse on AC and DC power line...
Dublin, Irelandemtest UCS200N
used
- Manufacturer: emtest
Details EMTEST UCS200N / EM Test UCS 200N The EM Test UCS 200N Ultra-Compact Simulator for Automotive Transients unifies the capabilites of an EFT/Burst simualtor, a Micropulse simulator and the required coupling...
Dublin, IrelandEMCO 3810/2
used
- Manufacturer: Emco
Details Emco 3810/2 The Emco 3810/2 Line Impedance Stabilization Network is a twochannel low pass filter network designed to isolate the equipment under test from an external power source while steering any radio...
Dublin, IrelandEMCO 3115
used
- Manufacturer: Emco
Details EMCO 3115 The Emco 3115 Antenna (double ridged guide) is a linearly polarised broadband antenna with excellent gain and good VSWR characteristics. The frequency range is 1 GHz to 18 GHz. The Emco 3115 was...
Dublin, IrelandChroma 63303A
used
- Manufacturer: Chroma
Details Chroma 63303A DC Electronic Load Module The Chroma Model 6330A series high speed DC electronic load improves CPU clock, baud rate, parser and added synchronic parallel function for fast operation. Each lo...
Dublin, IrelandSolar 7399-3
used
Details SOLAR 7399-3 Spike Generator The Solar Model 7399-3 Spike Generator is capable of providing high energy spikes with amplitudes adjustable up to 2500 V peak into low impedance loads, as required in MIL-STD...
Dublin, Ireland