Used Notch Machine Tools

Hydraulic Paper Corner Radius Notcher 3/8" Notch Sheet Cardboard 115V

• Manufacturer: Notch

Used, in Good Working Condition, Tested. Has a 3/8" radius notcher. 120v power for the hydraulic unit. Foot pedal to engage. Missing front panel. Hydraulic setup may not be original. If this item ships as Flat Ra...

AMERI-CAN NS5060 TWO-BLADED NOTCH SAW

• Manufacturer: Notch

AMERI-CAN NS5060 TWO-BLADED NOTCH SAW Manufacturer: Ameri-Can Model: NS5060 POWER: 220v, 60hz, 3ph Machine type: Two-blade notching saw Horsepower: 9hp Blades: Vertical Ø 600 mm; Horizontal Ø 500 mm Motors...

VR Wesson N HRG 1512-17 Top Notch Insert, Insert # SEC 634, Grade: VR77

• Manufacturer: Notch

50 Ton Ironworker, punch, shear, notch, coping, flat bar, Vitte (German)

"This unit was consigned to us many decades ago, and has been sleeping throughout our last TWO moves. Our best recall is that it was in inventory at another dealer who closed down in the 1980s, This means this Ir...

RUOFF V-NOTCH

• Manufacturer: Notch
• Model: V-

RUOFF V-NOTCH used notching machine offers up to 16 ga. mild steel capacity, 240 punches per minute, adjustable notch centers up to 1-1/8", depth up to 7/8". Powered by a 3/4 HP motor, this reliable machine is co...

RUOFF V-NOTCH

• Manufacturer: Notch
• Model: V-

RUOFF V-NOTCH used notching machine offers up to 16 ga. mild steel capacity, 240 punches per minute, adjustable notch centers up to 1-1/8", depth up to 7/8". Powered by a 3/4 HP motor, this reliable machine is co...

PRO NOTCH 6" x 6" x 12 Ga.

• Manufacturer: Notch

PRO NOTCH 6" x 6" x 12 Ga. Power Notcher #7872 #1 SPECIFICATIONS: EQUIPPED WITH: Slotted Table Blade Guard

U14857C Lockfomer speed notch and cheek bender combination

• Manufacturer: Notch

Item: U14857C Location: Kent, WA Power: 230v, 1 (single) phase This is a S&Drive (residential) speed notch with a Lockformer cheek bender. Both powered by the same hydraulic motor. Disconnect the cheek bender to...

2016 Mach Notch

• Manufacturer: Notch

Hydraulic, 250mm x 5mm , foot pedal, finger guard, 2 adjustable angle stops, emergency stop

NOTCH GRINDING MACHINE

• Manufacturer: Notch

USED MACHINERY Grinding length 1000 mm Self-centering spindle diameter Ø 200 mm NONCOMMITTAL DATA TO BE VERIFIED

Press Brake Die 96-3/8" Long 90° V 3/8" W 3/16" D 1-3/4" H 1/2" Tang Notch

• Manufacturer: Notch

Used, in Good Working Condition. Has surface rust. The V is 90°. 3/8" wide and 3/16" deep. Die is 1-3/4" high and 1" wide at base most is 3/4". Tang is 1/2" wide and 5/8" deep. The V is center to the tang. If thi...

EUROCUT PANETRIC 3200 square saw - 3200mm trolley - with notch - tilting disc

• Manufacturer: Notch